Public Administrative Department Local Bodies Closing in 24 days TDR #58051026

Tender For Construction Of Boundary Wall For Govt. Instution For Community At Sariamkalibali Pry School 253 At Belacoba G.P. (3207002004/Av/Vb/321002040971946)

Issued by Local Bodies · Jalpaiguri, West Bengal
Tender Value
2.84 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
24 days left
EMD
5696
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Boundary Wall For Govt. Instution For Community At Sariamkalibali Pry School 253 At Belacoba G.P. (3207002004/Av/Vb/321002040971946) , Polythene Sheet, 150 Gsm - Supply Of Polyethylene/Polythene Sheet Of Minimum 150 Gram Per Square Metre (Gsm), Uniform Thickness, Free From Holes, Tears And Defects, Suitable For Curing/Protection And Other Construction Requirements, As Directed By The Engineer-In-Charge. , Portland Cement - Supply Of Fresh, Sound And Approved Quality Portland Cement, In Original Sealed Bags, Of The Required Grade As Specified In The Tender/Boq, Conforming To The Relevant Bis/Is Specifications, Including Loading, Transportation, Unloading And Stacking At Site. , Stone Aggregate, 20 Mm Nominal Size - Supply And Stacking Of Clean, Hard, Durable, Crushed Stone Aggregate Of Single Nominal Size 20 Mm, Free From Dust, Clay, Organic Matter And Other Deleterious Materials, Conforming To Relevant Is Specifications And As Approved By The Engineer-In-Charge. , Stone Aggregate, 40 Mm Nominal Size - Supply And Stacking Of Clean, Hard, Durable, Crushed Stone Aggregate Of Single Nominal Size 40 Mm, Free From Dust, Clay, Organic Matter And Other Deleterious Materials, Conforming To Relevant Is Specifications And As Approved By The Engineer-In-Charge. , Stone Aggregate, 10 Mm Nominal Size - Supply And Stacking Of Clean, Hard, Durable, Crushed Stone Aggregate Of Single Nominal Size 10 Mm, Free From Dust, Clay, Organic Matter And Other Deleterious Materials, Conforming To Relevant Is Specifications And As Approved By The Engineer-In-Charge. , Supply Of Hot-Dip Galvanized Mild Steel Wire Conforming To The Applicable Is 280 And Is 4826 Requirements, As Applicable, Of Specified Diameter, Zinc Coating, And Mechanical Properties. The Wire Shall Be Free From Defects And Conforming To Relevant Is Specifications And As Approved By The Engineer-In-Charge. , Supply Of Tmt Steel Bars Conforming To Is 1786, In Fe 415 / Fe 500 / Fe 500D Grade, Manufactured By Sail / Tata Steel / Rinl, Of Required Diameter And Quantity. The Material Shall Be New, Unused, Free From Defects And Accompanied By The Manufacturers Test Certificate.. Conforming To Relevant Is Specifications And As Approved By The Engineer-In-Charge. , Supply Of First-Class Traditional Burnt Clay Bricks Of Standard Size, Well-Burnt, Uniform In Shape And Size, With Sharp Edges And Smooth Faces, Free From Cracks, Flaws And Harmful Impurities. Bricks Shall Conform To Is 1077, As Applicable, And Meet The Specified Requirements For Compressive Strength, Water Absorption And Efflorescence. , Supply Of Clean, Medium-Grade Natural Sand, Free From Clay, Silt, Organic Matter And Other Harmful Impurities, Suitable For Building And Masonry Works. Sand Shall Conform To Is 383, As Applicable, And Meet The Specified Grading Requirements. , Supply Of Mild Steel (Ms) Grill Weighing Above 10 Kg/M² And Up To 16 Kg/M², Fabricated From Good-Quality Ms Flats, Bars And Sections, As Per Approved Design And Drawing. The Grill Shall Be Properly Welded, Aligned And Free From Defects, Suitable For Installation In Building / Boundary Works. , Supply Of Good-Quality Red Oxide Zinc Chromate Primer Suitable For Application On Iron And Steel Surfaces, Conforming To The Relevant Applicable Is Standard. The Primer Shall Provide Corrosion Protection And Have Good Adhesion, Suitable Consistency And Uniform Colour. The Material Shall Be Supplied In Properly Sealed Containers Bearing The Manufacturers Name, Batch Number And Manufacturing Date. , Supply Of Good-Quality Water-Thinnable Cement Primer Suitable For Application On Interior/Exterior Cement Plastered Surfaces, Conforming To The Relevant Applicable Is Standard. The Primer Shall Have A Voc Content Of Less Than 50 G/L, Provide Good Adhesion And Uniform Coverage, And Be Compatible With The Specified Finishing Paint. The Material Shall Be Supplied In Sealed Containers Bearing The Manufacturers Name, Batch Number And Manufacturing Date. , Supply Of Good-Quality Water-Based 100% Acrylic Exterior Emulsion Paint, Suitable For Exterior Plastered And Concrete Surfaces, Weather-Resistant, Durable, And Resistant To Fungal Growth And Peeling. The Paint Shall Conform To The Relevant Applicable Is Standard And Be Compatible With The Specified Primer. Material Shall Be Supplied In Sealed Containers Bearing The Manufacturers Name, Batch Number And Manufacturing Date. , Supply Of Good-Quality Synthetic Enamel Paint Suitable For Application On Metal And Wood Surfaces, Providing A Smooth, Durable, Glossy Finish With Good Adhesion And Resistance To Weathering. The Paint Shall Have Voc Content Less Than 150 G/L And Conform To The Relevant Applicable Is Standard. The Material Shall Be Supplied In Sealed Containers Bearing The Manufacturers Name, Batch Number And Manufacturing Date. , Coarse Sand - Supply And Stacking Of Clean, Hard And Durable Coarse Sand, Properly Graded And Free From Clay, Silt, Organic Matter And Other Deleterious Materials, Conforming To Relevant Is Specifications And Suitable For Concrete/Mortar Work, As Approved By The Engineer-In-Charge. , Shuttering Plank, 25-30 Mm Thick - Hire Charges For Providing Shuttering Planks Of 25 Mm To 30 Mm Thickness, Including All Necessary Fittings, Joints, Supports/Accessories Except Props, Complete As Required For Formwork, Including Loading, Transportation, Erection, Dismantling And Removal From Site. , Concrete Mixer, 0.25-0.40 Cum With Hopper - Hire Charges For Providing Concrete Mixer Of 0.25 To 0.40 Cubic Metre Capacity With Hopper, Complete With Operator, Fuel, Lubricants, Routine Maintenance And All Incidental Charges, Ready For Use At Site. , Needle Vibrator, 40 Mm - Hire Charges For Providing Electrically/Diesel-Operated Needle-Type Concrete Vibrator Having 40 Mm Diameter Needle, Complete With Operator, Power/Fuel, Flexible Shaft, Routine Maintenance And All Accessories Required For Proper Compaction Of Concrete

BOQ

Name of Work:- Construction of Boundary wall for Govt. instution for community at Sariamkalibali pry School 253 at BELACOBA G.P. (3207002004/AV/VB/321002040971946)
Sl. No. Item Description
1Polythene Sheet, 150 GSM – Supply of polyethylene/polythene sheet of minimum 150 gram per square metre (GSM), uniform thickness, free from holes, tears and defects, suitable for curing/protection and other construction requirements, as directed by the Engineer-in-Charge.
2Portland Cement – Supply of fresh, sound and approved quality Portland cement, in original sealed bags, of the required grade as specified in the tender/BOQ, conforming to the relevant BIS/IS specifications, including loading, transportation, unloading and stacking at site.
3Stone Aggregate, 20 mm Nominal Size – Supply and stacking of clean, hard, durable, crushed stone aggregate of single nominal size 20 mm, free from dust, clay, organic matter and other deleterious materials, conforming to relevant IS specifications and as approved by the Engineer-in-Charge.
4Stone Aggregate, 40 mm Nominal Size – Supply and stacking of clean, hard, durable, crushed stone aggregate of single nominal size 40 mm, free from dust, clay, organic matter and other deleterious materials, conforming to relevant IS specifications and as approved by the Engineer-in-Charge.
5Stone Aggregate, 10 mm Nominal Size – Supply and stacking of clean, hard, durable, crushed stone aggregate of single nominal size 10 mm, free from dust, clay, organic matter and other deleterious materials, conforming to relevant IS specifications and as approved by the Engineer-in-Charge.
6Supply of hot-dip galvanized mild steel wire conforming to the applicable IS 280 and IS 4826 requirements, as applicable, of specified diameter, zinc coating, and mechanical properties. The wire shall be free from defects and conforming to relevant IS specifications and as approved by the Engineer-in-Charge.
7Supply of TMT steel bars conforming to IS 1786, in Fe 415 / Fe 500 / Fe 500D grade, manufactured by SAIL / TATA Steel / RINL, of required diameter and quantity. The material shall be new, unused, free from defects and accompanied by the manufacturer's test certificate.. conforming to relevant IS specifications and as approved by the Engineer-in-Charge.
8Supply of first-class traditional burnt clay bricks of standard size, well-burnt, uniform in shape and size, with sharp edges and smooth faces, free from cracks, flaws and harmful impurities. Bricks shall conform to IS 1077, as applicable, and meet the specified requirements for compressive strength, water absorption and efflorescence.
9Supply of clean, medium-grade natural sand, free from clay, silt, organic matter and other harmful impurities, suitable for building and masonry works. Sand shall conform to IS 383, as applicable, and meet the specified grading requirements.
10Supply of mild steel (MS) grill weighing above 10 kg/m² and up to 16 kg/m², fabricated from good-quality MS flats, bars and sections, as per approved design and drawing. The grill shall be properly welded, aligned and free from defects, suitable for installation in building / Boundary works.
11Supply of good-quality red oxide zinc chromate primer suitable for application on iron and steel surfaces, conforming to the relevant applicable IS standard. The primer shall provide corrosion protection and have good adhesion, suitable consistency and uniform colour. The material shall be supplied in properly sealed containers bearing the manufacturer's name, batch number and manufacturing date.
12Supply of good-quality water-thinnable cement primer suitable for application on interior/exterior cement plastered surfaces, conforming to the relevant applicable IS standard. The primer shall have a VOC content of less than 50 g/L, provide good adhesion and uniform coverage, and be compatible with the specified finishing paint. The material shall be supplied in sealed containers bearing the manufacturer's name, batch number and manufacturing date.
13Supply of good-quality water-based 100% acrylic exterior emulsion paint, suitable for exterior plastered and concrete surfaces, weather-resistant, durable, and resistant to fungal growth and peeling. The paint shall conform to the relevant applicable IS standard and be compatible with the specified primer. Material shall be supplied in sealed containers bearing the manufacturer's name, batch number and manufacturing date.
14Supply of good-quality synthetic enamel paint suitable for application on metal and wood surfaces, providing a smooth, durable, glossy finish with good adhesion and resistance to weathering. The paint shall have VOC content less than 150 g/L and conform to the relevant applicable IS standard. The material shall be supplied in sealed containers bearing the manufacturer's name, batch number and manufacturing date.
15Coarse Sand – Supply and stacking of clean, hard and durable coarse sand, properly graded and free from clay, silt, organic matter and other deleterious materials, conforming to relevant IS specifications and suitable for concrete/mortar work, as approved by the Engineer-in-Charge.
16Shuttering Plank, 25–30 mm Thick – Hire charges for providing shuttering planks of 25 mm to 30 mm thickness, including all necessary fittings, joints, supports/accessories except props, complete as required for formwork, including loading, transportation, erection, dismantling and removal from site.
17Concrete Mixer, 0.25–0.40 Cum with Hopper – Hire charges for providing concrete mixer of 0.25 to 0.40 cubic metre capacity with hopper, complete with operator, fuel, lubricants, routine maintenance and all incidental charges, ready for use at site.
18Needle Vibrator, 40 mm – Hire charges for providing electrically/diesel-operated needle-type concrete vibrator having 40 mm diameter needle, complete with operator, power/fuel, flexible shaft, routine maintenance and all accessories required for proper compaction of concrete Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58051026
AUTHORITY Local Bodies
TENDER VALUE 2.84 Lakhs
LAST DATE 11-11-2026
Authority
Authority Name Zilla Parishad
Work Description Tender for Construction Of Boundary Wall For Govt. Instution For Community At Sariamkalibali Pry School 253 At Belacoba G.P. (3207002004/Av/Vb/321002040971946) , Polythene Sheet, 150 Gsm - Supply Of Polyethylene/Polythene Sheet Of Minimum 150 Gram Per Square Metre (Gsm), Uniform Thickness, Free From Holes, Tears And Defects, Suitable For Curing/Protection And Other Construction Requirements, As Directed By The Engineer-In-Charge. , Portland Cement - Supply Of Fresh, Sound And Approved Quality Portland Cement, In Original Sealed Bags, Of The Required Grade As Specified In The Tender/Boq, Conforming To The Relevant Bis/Is Specifications, Including Loading, Transportation, Unloading And Stacking At Site. , Stone Aggregate, 20 Mm Nominal Size - Supply And Stacking Of Clean, Hard, Durable, Crushed Stone Aggregate Of Single Nominal Size 20 Mm, Free From Dust, Clay, Organic Matter And Other Deleterious Materials, Conforming To Relevant Is Specifications And As Approved By The Engineer-In-Charge. , Stone Aggregate, 40 Mm Nominal Size - Supply And Stacking Of Clean, Hard, Durable, Crushed Stone Aggregate Of Single Nominal Size 40 Mm, Free From Dust, Clay, Organic Matter And Other Deleterious Materials, Conforming To Relevant Is Specifications And As Approved By The Engineer-In-Charge. , Stone Aggregate, 10 Mm Nominal Size - Supply And Stacking Of Clean, Hard, Durable, Crushed Stone Aggregate Of Single Nominal Size 10 Mm, Free From Dust, Clay, Organic Matter And Other Deleterious Materials, Conforming To Relevant Is Specifications And As Approved By The Engineer-In-Charge. , Supply Of Hot-Dip Galvanized Mild Steel Wire Conforming To The Applicable Is 280 And Is 4826 Requirements, As Applicable, Of Specified Diameter, Zinc Coating, And Mechanical Properties. The Wire Shall Be Free From Defects And Conforming To Relevant Is Specifications And As Approved By The Engineer-In-Charge. , Supply Of Tmt Steel Bars Conforming To Is 1786, In Fe 415 / Fe 500 / Fe 500D Grade, Manufactured By Sail / Tata Steel / Rinl, Of Required Diameter And Quantity. The Material Shall Be New, Unused, Free From Defects And Accompanied By The Manufacturers Test Certificate.. Conforming To Relevant Is Specifications And As Approved By The Engineer-In-Charge. , Supply Of First-Class Traditional Burnt Clay Bricks Of Standard Size, Well-Burnt, Uniform In Shape And Size, With Sharp Edges And Smooth Faces, Free From Cracks, Flaws And Harmful Impurities. Bricks Shall Conform To Is 1077, As Applicable, And Meet The Specified Requirements For Compressive Strength, Water Absorption And Efflorescence. , Supply Of Clean, Medium-Grade Natural Sand, Free From Clay, Silt, Organic Matter And Other Harmful Impurities, Suitable For Building And Masonry Works. Sand Shall Conform To Is 383, As Applicable, And Meet The Specified Grading Requirements. , Supply Of Mild Steel (Ms) Grill Weighing Above 10 Kg/M² And Up To 16 Kg/M², Fabricated From Good-Quality Ms Flats, Bars And Sections, As Per Approved Design And Drawing. The Grill Shall Be Properly Welded, Aligned And Free From Defects, Suitable For Installation In Building / Boundary Works. , Supply Of Good-Quality Red Oxide Zinc Chromate Primer Suitable For Application On Iron And Steel Surfaces, Conforming To The Relevant Applicable Is Standard. The Primer Shall Provide Corrosion Protection And Have Good Adhesion, Suitable Consistency And Uniform Colour. The Material Shall Be Supplied In Properly Sealed Containers Bearing The Manufacturers Name, Batch Number And Manufacturing Date. , Supply Of Good-Quality Water-Thinnable Cement Primer Suitable For Application On Interior/Exterior Cement Plastered Surfaces, Conforming To The Relevant Applicable Is Standard. The Primer Shall Have A Voc Content Of Less Than 50 G/L, Provide Good Adhesion And Uniform Coverage, And Be Compatible With The Specified Finishing Paint. The Material Shall Be Supplied In Sealed Containers Bearing The Manufacturers Name, Batch Number And Manufacturing Date. , Supply Of Good-Quality Water-Based 100% Acrylic Exterior Emulsion Paint, Suitable For Exterior Plastered And Concrete Surfaces, Weather-Resistant, Durable, And Resistant To Fungal Growth And Peeling. The Paint Shall Conform To The Relevant Applicable Is Standard And Be Compatible With The Specified Primer. Material Shall Be Supplied In Sealed Containers Bearing The Manufacturers Name, Batch Number And Manufacturing Date. , Supply Of Good-Quality Synthetic Enamel Paint Suitable For Application On Metal And Wood Surfaces, Providing A Smooth, Durable, Glossy Finish With Good Adhesion And Resistance To Weathering. The Paint Shall Have Voc Content Less Than 150 G/L And Conform To The Relevant Applicable Is Standard. The Material Shall Be Supplied In Sealed Containers Bearing The Manufacturers Name, Batch Number And Manufacturing Date. , Coarse Sand - Supply And Stacking Of Clean, Hard And Durable Coarse Sand, Properly Graded And Free From Clay, Silt, Organic Matter And Other Deleterious Materials, Conforming To Relevant Is Specifications And Suitable For Concrete/Mortar Work, As Approved By The Engineer-In-Charge. , Shuttering Plank, 25-30 Mm Thick - Hire Charges For Providing Shuttering Planks Of 25 Mm To 30 Mm Thickness, Including All Necessary Fittings, Joints, Supports/Accessories Except Props, Complete As Required For Formwork, Including Loading, Transportation, Erection, Dismantling And Removal From Site. , Concrete Mixer, 0.25-0.40 Cum With Hopper - Hire Charges For Providing Concrete Mixer Of 0.25 To 0.40 Cubic Metre Capacity With Hopper, Complete With Operator, Fuel, Lubricants, Routine Maintenance And All Incidental Charges, Ready For Use At Site. , Needle Vibrator, 40 Mm - Hire Charges For Providing Electrically/Diesel-Operated Needle-Type Concrete Vibrator Having 40 Mm Diameter Needle, Complete With Operator, Power/Fuel, Flexible Shaft, Routine Maintenance And All Accessories Required For Proper Compaction Of Concrete
Basic Detail
Tender No WB/JAL/SADAR/02/VBG-RAMG/26-27
Bidding Type Tender
Location
City Jalpaiguri
State West Bengal
Key Dates
Publish Date 15 Oct 2026
Submission Date 11 Nov 2026
Open Date 13 Nov 2026
Finance
Tender Value 2.84 Lakhs
Tender Fee Ref. Documents
EMD 5696
Exemption Available
Document List
07996627-8d0c-4a4d-b545-4934c8c40661.html
BOQ_5188005.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 15, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 24 days
Nov 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 26 days

Tender Documents

Download All (ZIP) ↓
html

07996627-8d0c-4a4d-b545-4934c8c40661.html

xls

BOQ_5188005.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender