Tender For Repairing And Overhauling Of Mtu Along With Supply And Delivery Of Fast Moving Spares Parts For Upkeepment Of Mobile Treatment Unit Located At Bankura Under Bankura Mechanical Division, P.H.E Dte.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Nov 2026
2 days left
EMD
66000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bankura → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Overhauling Of Mtu Along With Supply And Delivery Of Fast Moving Spares Parts For Upkeepment Of Mobile Treatment Unit Located At Bankura Under Bankura Mechanical Division, P.H.E Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of the whole water Treatment plant unit from the truck and thereafter installation and commissioning of the whole water Treatment plant including change of pipelines of 1 1/2 ' CPVC pipes of quantity 100 ft approx including replacement of valve and repairing of the skid etc as per full satisfaction of the EIC to get the production of 4000 pouches per hour. |
| 2 | UF unit for removing all undisclosed impurities including suspended solids, colidall impurities having Feed Pressure-5 Bar, Operating Tran membrane Pressure -2 psig, Maximum Backwash- 20 psig as per following specification:-a) Filtrate Flow- 12.1-29.5 gpm 2.7-6.7m³/hr)b) Filtrate Turbidity-≥00.7 NTUc)Virus removal-≥ 4 logd) Bacteria removal-≥ 4 loge) Configaration:- Capillary Ultrarafitration Modulef) Membrane Polymar:- Hydrophilic Poly thersulfoneg) Nominal Membrance Area :- 500 ft²(46m²) or aboveh) Fiber Dimensions- ID 0.031\\" (0.8mm) OD 0.055\\" (1.4mm)i) Pore size:- 0.02 micron or lessj) Typical Filtrate Flux Range:- 35-85 gfd (59-1451/m²/h)k) Maximum Applied Feed Pressure. 73 psig (5bar)1) Maximum Transmenibrane Pressure - 20psig (1.4 bar)m) Maximum backwash transtnembrance Pressure :- 20 usig (1.4 bar) |
| 3 | o) Instantaneous Hydrogen Peroxide Tolerance :- 200 ppm**n) Instantaneous Chlorine Tolerance :- 100 pртp) maximum chlorine Expossure :-200.000ppm-hrsq) maximum instantaneous Feed Turbidity:- 100 NTUr) Maximum Operating Temperature:- 104° Fs) pH operatin range:- 4.0-10.0t) Clraning pH Range- 1.5-13.0u) Operating Mode:- Inside to Outside Filtration Direct flow of Crossflow. v)Backwash flux-100-150 gfd(170-255 l/m2/hr)w)Backwash duration-30-60 secondsx)Backwash Frequency-20-60 minutesy) Chemical Enhanced Backwash Frequency-1-4 ties per daysz) Chemical Enhanced Backash Duration-1-30 minutesz1) Disinfection Chemicals-NaoCL,H2o,CLO2 or NH2CLz2)Cleaning Chemicals-NaOH,HCL,H2so4 or Citric Acid(Make-Hydranautica/Dow/Any approved) |
| 4 | Installation and Commissioning of UF unitfor removing all undissolvedimpurities including suspended solids, colidall impurities having Feed Prussure5 Bar. (Supplied by Departmentally) |
| 5 | Installation and Commissioning of RO unit , Capacity 2000 lit/hr. suitable for RO vesel diameter 8\\" & length with through checking & testing complete.(Supplied by Departmentally) |
| 6 | Supply , delivery and painting of Chlorinated rubber paint including Brushing applying promer to ensure floor of the MTU |
| 7 | Supply,delivery,installation of Oxygen concentrator capacity 5 lpm |
| 8 | SS Micron cartridge filter for UF unit 100 micron 20\\" Long(Jumbo wound type) ID-80 mm OD-100 mm Length 500 mm, Flow capacity- 8 m3/ hr and other suitable parameters |
| 9 | Micron cartridge filter for RO unit 5 micron 20\\" Long(Jumbo type) RO filter assembly with below specification ID- 4.5 \\" OD-6 \\" Length-20\\", Flow capacity- 8 m3/ hr cover material- Ploypropelene, max operating temp-120F |
| 10 | Supply and delivery of Horizontal Electrode, L=190 mm |
| 11 | Supply and delivery of Vertical Electrode, L=190 mm |
| 12 | Supply and delivery of PLC Unit for Pouch Packing Machine |
| 13 | Supply and delivery of Digital Controller as per Departmental Sample(Push button type) |
| 14 | Supply and delivery of Control Transformer |
| 15 | Supply and delivery of Horizontal Transformer |
| 16 | Supply and delivery of Vertical Transformer |
| 17 | Add: 18% GST |
| 18 | Add: 1% Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender