Rural Development Local Bodies Closing in 13 days TDR #58050743

Tender For Annual Maintenance Service For A Furnace Maintenance Components For Repairing Or Replacement Of Electric Cremation Furnace Of Unit-I And Pollution Control Unit Ward No 22, Under Barasat Municipality.

Issued by Local Bodies · 24 Paraganas North, West Bengal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Oct 2026
13 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Annual Maintenance Service For A Furnace Maintenance Components For Repairing Or Replacement Of Electric Cremation Furnace Of Unit-I And Pollution Control Unit Ward No 22, Under Barasat Municipality. , Roast Bricks , Fire Tiles Brick No. 27 , Fire Tiles Brick No. 29 , Angle Bricks Brick No. 88 , Ash Bricks Brick No 16 To 24 , Air Pocket Brick Brick No 100 , Air Pocket Brick Brick No 101 , Brick No. 92 , Brick No. 93 , Insulation Bricks , 24 X 12 X 3 Tiles , Fire Bricks Is : 8 , Ash Door Bricks (Small) , Ash Door Bricks (Big) , Fire Clay , Ceramic Fibre Blanket , Ceramic Tube , Hand Gloves Heat Proof , Heating Elements Coil , Copper Wire 10 Swg With Porcelain Bit , Brass Connector For Heating Coil , Supply, Delivery At Site And Laying Of 1.1 Kv Grade Xlpe Insulated Pvc Outer Sheathed Armoured Alluminum Cable Conductor Power Cable Of Following Size Either Through Cable Duct Or Through Cable Tray Or Through Protection Pipes Incl End Termination As Required And As Per Technical Specification. , A) 3 ½ Core X 35 Sq. Mm. (Al.) , B) 3Core X 6 Sq Mm (Al) , C) Termination Of Cable With Necessary Gland & Socket , D) Single Core Unsheathed Pvc Insulated Flexible Cable With Necessary Socketing, Etc Complete. Single Core 35Sq Mm (Cu) , 200Amp Tpn Fuse Switch Unit Fn Type Open/Closed , 100 annual periodical maintenance Tpn Fuse Switch Unit Fn Type Open/ Closed , 32 annual periodical maintenance Tpn Fuse Switch Unit Fn Type Open/ Closed , 32 Amp-Tpn Isolator , 16 Amp. Dp Isolator (Enclosed) , 63 A Tpn Contactor (L&T) Ml 4 , Starter For Motor L&T Make , Contactor For Heater Group (Make : Lk) Mnx 80 With Add On Block And Other Components As Require. , Contactor Coil Mo-90 With Ad On Block , Mn2 Thermal Overload Relay Range 3-5 A , Mn5 Thermal Overload Relay Range 14-23 A/9-15 A , Mnx 16 Dol Starter , Tpn S-D-F Suitable For Din Fuse-Link (Tpn & Fp) In Open Executionhrc Fuse Base Hn/ Hq Type : Fn 100A Tpn , Tpn S-D-F In Ss Enclosure Fn 100Tpn (Make : Lk) , Tpn S-D-F In Ss Enclosure Fn 160Tpn (Make : Lk) , 10A-32A Hf Type Cylindrical Fuse Links , 40-63A Hf Type Fuse , 63A Hn Din Type Fuse Link , 80A Hn Din Type Fuse Link , 100A Hn Din Type Fuse Link , 125A Hn Din Type Fuse Link , 160A Hn Din Type Fuse Link , Ns Type Fuse 63A , 300 A Porcellain Fuse , Push Button Switch , Star Delta Timer ,Gic Make , Sp Mcb 10A -32A, D Curve , Sp Mcb 40A -63A, D Curve , Dp Mcb 6A -32A, D Curve , Dp Mcb 40A -63A, D Curve , Tp Mcb 6A -32A, D Curve , Tp Mcb 40A -63A, D Curve , 0-125A Ammeter Ae 4 X 4 , 0-15A Ammeter Ae 4 X 4 , 0-300 A Ammeter Ae 4 X 4 , 0-500 A Volt Meter Ae 4 X 4 , Temperature Controller Meter , 300/5A Current Transformer , Voltmeter Selector Switch (Vss) 10A , Voltmeter Selector Switch (Vss) 16A , Ammeter Selector Switch (Salzer Make ) Without Ct16a , Ammeter Selector Switch (Salzer Make ) With Ct16a , Ammeter Selector Switch (Salzer Make ) With Out Ct32a , Ammeter Selector Switch (Salzer Make ) With Out Ct40a , On -Off Rotary Switch 1 Pole 16A , On -Off Rotary Switch 1 Pole 32A , On -Off Rotary Switch 2 Pole 16A , On -Off Rotary Switch 2 Pole 32A , On -Off Rotary Switch 3 Pole 16A , On -Off Rotary Switch 3 Pole 32A , Led Indicating Lamp , Aviation Light With Fixing , Chrome Allumina Thermocouple , Temperature Controller Meter K Type(0-1200 Deg. C) , Thermocouple Compensating Wire (High Qualit) , K Type , Repairing And Overhauling The Front Door Assembly With S.S Rod, Grade 310 , Ceramic Blanket 128 Density 1400 Degree C Temperature Carrying Etc. Complete Required Including Dismantling The Damage Items And Restore. , Ms Door Covering Sheet , Shaft For Door Lifting Gear , Handle For Door Lifting , Shaft For Door Operating Handle , Pulley For Door Operating , Chain I) 1 X 3 Mtr. , Chain Ii) 3/4 X 2.5 Mtr , Spring Sets For Door Pressing To Guide Rail , Trolley Rollers , Trolley Pin , Trolley Bush , Trolley Socket , Ash Collection Door Hinge Block , Liver , Bearing Sets(Bearing, Ring & Socket) For Blower Motor Fresh Air , Bearing Sets(Bearing, Ring & Socket) For Main Door Lifting Sprocket , Bearing Sets(Bearing, Ring & Socket) For Handle Unit Arrangement. , Handle Pin For Door Lifting , Sprocket For Door Lifting Gear , Counter Weight , Ash Collection Spade And Hooks , Ash Collection Tray Stainless Steel , Sprocket For Door Operating Handle , Turn Buckle For Door Lifting Chain , Painting Of Furnace Unit And Charging Trolley By Using Aluminum Paints Before Applying Red Oxide. , Operation, Routine Checking, Servicing, Lubrication, Alignment, Cleaning And Maintenance Of Charging Door Guide Rail, Bearing, Limit Switch, Chain/Sprocket And Allied Accessories Of Electric Crematorium Complete. , Painting Of Pollution Control Unit By Using Aluminum Paints Before Applying Red Oxide. , Servicing Of Charging Trolley And Main Charging Door. , Fresh Air Blower , 3Mm M.S Sheet (8X4) , 3Mm M.S Sheet (4X4) , M.S Angle 50Mm X50mm , M.S Angle 25Mm X25mm , Nut, Bolt 5/8 X2 With Washer , Nut, Bolt ½ X2 With Washer , Nut, Bolt 3/8 X2 With Washer , Flue Exhaust Blower With Ss Impeller (Id Fan) , Blower Casing With Ss Impeller And Accessories As Require Including Dismantling The Other Unit. , Square To Round Duct , 200 Dia Ms Round Pipe From Blower Unit To Chimney Ductling , 200 Dia Ms Flange , 300 Dia Ms Flange , Asbestos Tope , Necessary Gi Pipes, Nipple , Valves, Sockets, Etc And Accessories For Changing Of Scrubber And Ventury Damages Part Of Water Line From Slurry Pump To Scrubber Unit. , Repairing Of Recirculation Pump With Heat Vernishing, Coil Rewinding , Etc Complete 2 Hp Slurry Water Pump. , Nut, Bolt Washer Etc. Of Adequate Capacity Require For Replacement Of Damaged Items. , Reapiring And Servicing Of Pollution Control Unit With Cleaing Of Blower Unit And Mist Eliminator. , Ms Patti 40X6 Mm , Supply, Delivery At Site, Installation, Testing And Commissioning Of S.S. Fabricated Droplet Separator/Mist Eliminator With Accessories Complete As Per Technical Specification. , Supply Of New Recirculation Slurry Water Pump Of 2Hp , Kirloskar Make With Necessary Pipeing Arrangement. , 10 H.P/7.5 H.P. , 3 Ph, 2900 Rpm - Abb Make And Accessories , 2 H.P, 3 Ph, 2900 Rpm - Abb Make, And Accessories , 2 H.P Mono Block Slurry Water Pump , Spray Tower Unit For Scrubber , Spray Tower Unit For Ventury , M.S Flange , 30 Mtr Height Chimney Painting With Scrubbing Thoroughly And Applying 2 Coat Red Oxide And Two Coat Aluminum Paints , Steel Supporting Rope Of The Chimney Of 30 Mtrs Height From Different Directions. , Iron Materials And Nut Bolt Etc For Fixing Of Steel Rope With The Ground Support. , Turn Buckle, U Clamp , Nut Bolt Etc. For Fixing Of Steel Rope With The Grount. Including Plain Cement Concrete Work Other Civil Work. , Supply And Fixing Of Aviation Light Of The Chimney With Necessary Stud And Accessories With Welding Work Etc. Complete. , Supply And Fixing Of Lightening Arrestor Of Chimney Unit. , Supply, Fabrication, Painting And Site Installation Of Ms Channel Adequate Capacity Of 3 Nos Per Chimney Segment. Includes Cutting, Drilling, Necessary Gusset/Connection Plates, Fasteners And On-Site Bolting/Welding For Erection. , 10 H.P. Motor , 7.5 Hp Motor , 2 H.P. Motor , 2 H.P Mono Block Pump Motor , Delivery Charges Per Trip

BOQ

Name of Work:- Annual Maintenance service for a Furnace Maintenance Components for repairing or Replacement of electric Cremation furnace of Unit-I and Pollution Control Unit ward no 22, Under Barasat Municipality.
Sl. No. Item Description
1Roast Bricks
2Fire Tiles Brick No. 27
3Fire Tiles Brick No. 29
4Angle Bricks Brick No. 88
5Ash Bricks Brick No 16 to 24
6Air Pocket Brick Brick No 100
7Air Pocket Brick Brick No 101
8Brick No. 92
9Brick No. 93
10Insulation Bricks
1124\\" x 12\\" x 3\\" tiles
12Fire Bricks IS : 8
13Ash Door Bricks (Small)
14Ash Door Bricks (Big)
15Fire Clay
16Ceramic Fibre Blanket
17Ceramic Tube
18Hand gloves heat proof
19Heating Elements Coil
20Copper Wire 10 SWG with Porcelain Bit
21Brass Connector for Heating Coil
22Supply, delivery at site and laying of 1.1 Kv grade XLPE insulated PVC outer sheathed armoured Alluminum cable conductor power cable of following size either through cable duct or through cable tray or through protection pipes incl end termination as required and as per technical specification.
23a) 3 ½ core X 35 sq. mm. (Al.)
24b) 3core x 6 sq mm (Al)
25c) Termination of Cable with necessary Gland & Socket
26d) Single core Unsheathed PVC Insulated Flexible cable with necessary socketing, etc complete. Single core 35sq mm (CU)
27200Amp TPN Fuse Switch unit FN Type Open/Closed
28100 Amp TPN Fuse Switch unit FN Type Open/ Closed
2932 Amp TPN Fuse Switch unit FN Type Open/ Closed
3032 Amp-TPN Isolator
3116 Amp. DP Isolator (Enclosed)
3263 A TPN Contactor (L&T) ML 4
33Starter for Motor L&T Make
34Contactor for Heater Group (make : LK) MNX 80 with Add on block and other components as require.
35Contactor coil MO-90 with ad on block
36MN2 Thermal overload Relay range 3-5 A
37MN5 Thermal overload Relay range 14-23 A/9-15 A
38MNX 16 DOL starter
39TPN S-D-F suitable for DIN fuse-link (TPN & FP) in open executionHRC Fuse Base HN/ HQType : FN 100A TPN
40TPN S-D-F in SS EnclosureFN 100TPN (Make : LK)
41TPN S-D-F in SS EnclosureFN 160TPN (Make : LK)
4210A-32A HF type cylindrical fuse links
4340-63A HF type Fuse
4463A HN Din type fuse link
4580A HN Din type fuse link
46100A HN Din type fuse link
47125A HN Din type fuse link
48160A HN Din type fuse link
49NS Type Fuse 63A
50300 A Porcellain Fuse
51Push Button Switch
52Star Delta Timer ,GIC make
53SP MCB 10A -32A, D curve
54SP MCB 40A -63A, D curve
55DP MCB 6A -32A, D curve
56DP MCB 40A -63A, D curve
57TP MCB 6A -32A, D curve
58TP MCB 40A -63A, D curve
590-125A Ammeter AE 4\\" x 4\\"
600-15A Ammeter AE 4\\" x 4\\"
610-300 A Ammeter AE 4\\" x 4\\"
620-500 A Volt Meter AE 4\\" x 4\\"
63Temperature Controller meter
64300/5A Current Transformer
65Voltmeter Selector Switch (VSS) 10A
66Voltmeter Selector Switch (VSS) 16A
67Ammeter Selector switch (Salzer Make ) without CT16A
68Ammeter Selector switch (Salzer Make ) with CT16A
69Ammeter Selector switch (Salzer Make ) with out CT32A
70Ammeter Selector switch (Salzer Make ) with out CT40A
71ON -OFF Rotary Switch 1 pole 16A
72ON -OFF Rotary Switch 1 pole 32A
73ON -OFF Rotary Switch 2 pole 16A
74ON -OFF Rotary Switch 2 pole 32A
75ON -OFF Rotary Switch 3 pole 16A
76ON -OFF Rotary Switch 3 pole 32A
77LED Indicating Lamp
78Aviation Light with fixing
79Chrome Allumina Thermocouple
80Temperature controller Meter K type(0-1200 Deg. C)
81Thermocouple compensating wire (High qualit) , K type
82Repairing and Overhauling the front Door Assembly with S.S rod, Grade 310 , Ceramic Blanket 128 Density 1400 Degree C Temperature Carrying etc. complete required including dismantling the damage items and restore.
83MS door covering sheet
84Shaft for Door lifting Gear
85Handle for Door Lifting
86Shaft for door Operating Handle
87Pulley for Door Operating
88Chain i) 1\\" x 3 Mtr.
89Chain ii) 3/4\\" x 2.5 Mtr
90Spring Sets for door Pressing to guide rail
91Trolley Rollers
92Trolley Pin
93Trolley Bush
94Trolley Socket
95Ash Collection door hinge block
96Liver
97Bearing Sets(Bearing, ring & socket) for Blower motor Fresh Air
98Bearing Sets(Bearing, ring & socket) for Main door lifting sprocket
99Bearing Sets(Bearing, ring & socket) for Handle unit arrangement.
100Handle Pin for Door lifting
101Sprocket for door lifting gear
102Counter Weight
103Ash collection spade and hooks
104Ash Collection Tray Stainless Steel
105Sprocket for Door operating Handle
106Turn Buckle for door lifting chain
107Painting of furnace unit and charging trolley by using aluminum paints before applying red oxide.
108Operation, routine checking, servicing, lubrication, alignment, cleaning and maintenance of charging door guide rail, bearing, limit switch, chain/sprocket and allied accessories of electric crematorium complete.
109Painting of Pollution control unit by using aluminum paints before applying red oxide.
110Servicing of Charging trolley and main charging door.
111Fresh Air Blower
1123mm M.S Sheet (8'x4')
1133mm M.S Sheet (4'x4')
114M.S Angle 50mm x50mm
115M.S Angle 25mm x25mm
116Nut, Bolt 5/8 x2” with washer
117Nut, Bolt ½” x2” with washer
118Nut, Bolt 3/8 x2” with washer
119Flue exhaust Blower with SS Impeller (ID Fan)
120Blower Casing With SS impeller and accessories as require including dismantling the other unit.
121Square to round duct
122200 Dia MS Round Pipe from Blower unit to Chimney ductling
123200 Dia MS Flange
124300 Dia MS Flange
125Asbestos Tope
126Necessary GI Pipes, Nipple , Valves, Sockets, etc and accessories for Changing of Scrubber and ventury Damages Part of water line from slurry Pump to Scrubber unit.
127Repairing of Recirculation pump with heat vernishing, coil rewinding , etc complete 2 HP slurry water pump.
128Nut, Bolt washer etc. of adequate capacity require for replacement of damaged items.
129Reapiring and servicing of Pollution control unit with cleaing of Blower unit and Mist eliminator.
130MS Patti 40x6 mm
131Supply, delivery at site, installation, Testing and commissioning of S.S. fabricated droplet separator/Mist eliminator with accessories Complete as per technical specification.
132supply of new Recirculation slurry water Pump of 2HP , Kirloskar Make with necessary pipeing arrangement.
13310 H.P/7.5 H.P. , 3 ph, 2900 rpm - ABB Make and accessories
1342 H.P, 3 ph, 2900 rpm - ABB Make, and accessories
1352 H.P Mono Block Slurry Water Pump
136Spray tower unit for Scrubber
137Spray tower unit for Ventury
138M.S Flange
13930 Mtr Height chimney painting with scrubbing thoroughly and applying 2 coat red oxide and two coat Aluminum paints
140Steel Supporting rope of the chimney of 30 mtrs height from different directions.
141Iron Materials and nut bolt etc for fixing of steel rope with the Ground support.
142Turn buckle, U clamp , nut bolt etc. for fixing of steel Rope with the grount. Including PCC work other civil work.
143Supply and fixing of Aviation light of the chimney with necessary stud and accessories with welding work etc. complete.
144Supply and fixing of Lightening arrestor of chimney unit.
145Supply, fabrication, painting and site installation of MS channel adequate capacity of 3 nos per chimney segment. Includes cutting, drilling, necessary gusset/connection plates, fasteners and on-site bolting/welding for erection.
14610 H.P. MOTOR
1477.5 HP MOTOR
1482 H.P. MOTOR
1492 H.P MONO BLOCK PUMP MOTOR
150Delivery Charges per trip Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58050743
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 31-10-2026
Authority
Authority Name Urban Local Bodies
Work Description Tender for Annual Maintenance Service For A Furnace Maintenance Components For Repairing Or Replacement Of Electric Cremation Furnace Of Unit-I And Pollution Control Unit Ward No 22, Under Barasat Municipality. , Roast Bricks , Fire Tiles Brick No. 27 , Fire Tiles Brick No. 29 , Angle Bricks Brick No. 88 , Ash Bricks Brick No 16 To 24 , Air Pocket Brick Brick No 100 , Air Pocket Brick Brick No 101 , Brick No. 92 , Brick No. 93 , Insulation Bricks , 24 X 12 X 3 Tiles , Fire Bricks Is : 8 , Ash Door Bricks (Small) , Ash Door Bricks (Big) , Fire Clay , Ceramic Fibre Blanket , Ceramic Tube , Hand Gloves Heat Proof , Heating Elements Coil , Copper Wire 10 Swg With Porcelain Bit , Brass Connector For Heating Coil , Supply, Delivery At Site And Laying Of 1.1 Kv Grade Xlpe Insulated Pvc Outer Sheathed Armoured Alluminum Cable Conductor Power Cable Of Following Size Either Through Cable Duct Or Through Cable Tray Or Through Protection Pipes Incl End Termination As Required And As Per Technical Specification. , A) 3 ½ Core X 35 Sq. Mm. (Al.) , B) 3Core X 6 Sq Mm (Al) , C) Termination Of Cable With Necessary Gland & Socket , D) Single Core Unsheathed Pvc Insulated Flexible Cable With Necessary Socketing, Etc Complete. Single Core 35Sq Mm (Cu) , 200Amp Tpn Fuse Switch Unit Fn Type Open/Closed , 100 annual periodical maintenance Tpn Fuse Switch Unit Fn Type Open/ Closed , 32 annual periodical maintenance Tpn Fuse Switch Unit Fn Type Open/ Closed , 32 Amp-Tpn Isolator , 16 Amp. Dp Isolator (Enclosed) , 63 A Tpn Contactor (L&T) Ml 4 , Starter For Motor L&T Make , Contactor For Heater Group (Make : Lk) Mnx 80 With Add On Block And Other Components As Require. , Contactor Coil Mo-90 With Ad On Block , Mn2 Thermal Overload Relay Range 3-5 A , Mn5 Thermal Overload Relay Range 14-23 A/9-15 A , Mnx 16 Dol Starter , Tpn S-D-F Suitable For Din Fuse-Link (Tpn & Fp) In Open Executionhrc Fuse Base Hn/ Hq Type : Fn 100A Tpn , Tpn S-D-F In Ss Enclosure Fn 100Tpn (Make : Lk) , Tpn S-D-F In Ss Enclosure Fn 160Tpn (Make : Lk) , 10A-32A Hf Type Cylindrical Fuse Links , 40-63A Hf Type Fuse , 63A Hn Din Type Fuse Link , 80A Hn Din Type Fuse Link , 100A Hn Din Type Fuse Link , 125A Hn Din Type Fuse Link , 160A Hn Din Type Fuse Link , Ns Type Fuse 63A , 300 A Porcellain Fuse , Push Button Switch , Star Delta Timer ,Gic Make , Sp Mcb 10A -32A, D Curve , Sp Mcb 40A -63A, D Curve , Dp Mcb 6A -32A, D Curve , Dp Mcb 40A -63A, D Curve , Tp Mcb 6A -32A, D Curve , Tp Mcb 40A -63A, D Curve , 0-125A Ammeter Ae 4 X 4 , 0-15A Ammeter Ae 4 X 4 , 0-300 A Ammeter Ae 4 X 4 , 0-500 A Volt Meter Ae 4 X 4 , Temperature Controller Meter , 300/5A Current Transformer , Voltmeter Selector Switch (Vss) 10A , Voltmeter Selector Switch (Vss) 16A , Ammeter Selector Switch (Salzer Make ) Without Ct16a , Ammeter Selector Switch (Salzer Make ) With Ct16a , Ammeter Selector Switch (Salzer Make ) With Out Ct32a , Ammeter Selector Switch (Salzer Make ) With Out Ct40a , On -Off Rotary Switch 1 Pole 16A , On -Off Rotary Switch 1 Pole 32A , On -Off Rotary Switch 2 Pole 16A , On -Off Rotary Switch 2 Pole 32A , On -Off Rotary Switch 3 Pole 16A , On -Off Rotary Switch 3 Pole 32A , Led Indicating Lamp , Aviation Light With Fixing , Chrome Allumina Thermocouple , Temperature Controller Meter K Type(0-1200 Deg. C) , Thermocouple Compensating Wire (High Qualit) , K Type , Repairing And Overhauling The Front Door Assembly With S.S Rod, Grade 310 , Ceramic Blanket 128 Density 1400 Degree C Temperature Carrying Etc. Complete Required Including Dismantling The Damage Items And Restore. , Ms Door Covering Sheet , Shaft For Door Lifting Gear , Handle For Door Lifting , Shaft For Door Operating Handle , Pulley For Door Operating , Chain I) 1 X 3 Mtr. , Chain Ii) 3/4 X 2.5 Mtr , Spring Sets For Door Pressing To Guide Rail , Trolley Rollers , Trolley Pin , Trolley Bush , Trolley Socket , Ash Collection Door Hinge Block , Liver , Bearing Sets(Bearing, Ring & Socket) For Blower Motor Fresh Air , Bearing Sets(Bearing, Ring & Socket) For Main Door Lifting Sprocket , Bearing Sets(Bearing, Ring & Socket) For Handle Unit Arrangement. , Handle Pin For Door Lifting , Sprocket For Door Lifting Gear , Counter Weight , Ash Collection Spade And Hooks , Ash Collection Tray Stainless Steel , Sprocket For Door Operating Handle , Turn Buckle For Door Lifting Chain , Painting Of Furnace Unit And Charging Trolley By Using Aluminum Paints Before Applying Red Oxide. , Operation, Routine Checking, Servicing, Lubrication, Alignment, Cleaning And Maintenance Of Charging Door Guide Rail, Bearing, Limit Switch, Chain/Sprocket And Allied Accessories Of Electric Crematorium Complete. , Painting Of Pollution Control Unit By Using Aluminum Paints Before Applying Red Oxide. , Servicing Of Charging Trolley And Main Charging Door. , Fresh Air Blower , 3Mm M.S Sheet (8X4) , 3Mm M.S Sheet (4X4) , M.S Angle 50Mm X50mm , M.S Angle 25Mm X25mm , Nut, Bolt 5/8 X2 With Washer , Nut, Bolt ½ X2 With Washer , Nut, Bolt 3/8 X2 With Washer , Flue Exhaust Blower With Ss Impeller (Id Fan) , Blower Casing With Ss Impeller And Accessories As Require Including Dismantling The Other Unit. , Square To Round Duct , 200 Dia Ms Round Pipe From Blower Unit To Chimney Ductling , 200 Dia Ms Flange , 300 Dia Ms Flange , Asbestos Tope , Necessary Gi Pipes, Nipple , Valves, Sockets, Etc And Accessories For Changing Of Scrubber And Ventury Damages Part Of Water Line From Slurry Pump To Scrubber Unit. , Repairing Of Recirculation Pump With Heat Vernishing, Coil Rewinding , Etc Complete 2 Hp Slurry Water Pump. , Nut, Bolt Washer Etc. Of Adequate Capacity Require For Replacement Of Damaged Items. , Reapiring And Servicing Of Pollution Control Unit With Cleaing Of Blower Unit And Mist Eliminator. , Ms Patti 40X6 Mm , Supply, Delivery At Site, Installation, Testing And Commissioning Of S.S. Fabricated Droplet Separator/Mist Eliminator With Accessories Complete As Per Technical Specification. , Supply Of New Recirculation Slurry Water Pump Of 2Hp , Kirloskar Make With Necessary Pipeing Arrangement. , 10 H.P/7.5 H.P. , 3 Ph, 2900 Rpm - Abb Make And Accessories , 2 H.P, 3 Ph, 2900 Rpm - Abb Make, And Accessories , 2 H.P Mono Block Slurry Water Pump , Spray Tower Unit For Scrubber , Spray Tower Unit For Ventury , M.S Flange , 30 Mtr Height Chimney Painting With Scrubbing Thoroughly And Applying 2 Coat Red Oxide And Two Coat Aluminum Paints , Steel Supporting Rope Of The Chimney Of 30 Mtrs Height From Different Directions. , Iron Materials And Nut Bolt Etc For Fixing Of Steel Rope With The Ground Support. , Turn Buckle, U Clamp , Nut Bolt Etc. For Fixing Of Steel Rope With The Grount. Including Plain Cement Concrete Work Other Civil Work. , Supply And Fixing Of Aviation Light Of The Chimney With Necessary Stud And Accessories With Welding Work Etc. Complete. , Supply And Fixing Of Lightening Arrestor Of Chimney Unit. , Supply, Fabrication, Painting And Site Installation Of Ms Channel Adequate Capacity Of 3 Nos Per Chimney Segment. Includes Cutting, Drilling, Necessary Gusset/Connection Plates, Fasteners And On-Site Bolting/Welding For Erection. , 10 H.P. Motor , 7.5 Hp Motor , 2 H.P. Motor , 2 H.P Mono Block Pump Motor , Delivery Charges Per Trip
Basic Detail
Tender No 158-BM/Electric/NIeQ-6/26-27
Bidding Type Tender
Location
City 24 Paraganas North
State West Bengal
Key Dates
Publish Date 15 Oct 2026
Submission Date 31 Oct 2026
Open Date 03 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 5000
Exemption Not Available
Document List
17d74db2-ff45-4ca4-8315-e14a6c7e6762.html
Annexture.pdf
BOQ_5185864.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 15, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 31, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Nov 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
html

17d74db2-ff45-4ca4-8315-e14a6c7e6762.html

pdf

Annexture.pdf

xls

BOQ_5185864.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender