Drinking Water Supply and Sanitation Government Departments Closing in 5 days TDR #58050588

Tender For E-Quotation For Renovation Work Of Electromechanical Components Installsed At Karow Rural Water Supply Scheme With Supplying Fitting Of 50 Kva Servo Voltage Stabilizer, Fasd Starter, Sulice & Nr Valve, Led Street Light & Allied Works.

Issued by Government Departments · Dumka, Jharkhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Oct 2026
5 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dumka → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for E-Quotation For Renovation Work Of Electromechanical Components Installsed At Karow Rural Water Supply Scheme With Supplying Fitting Of 50 Kva Servo Voltage Stabilizer, Fasd Starter, Sulice & Nr Valve, Led Street Light & Allied Works. , Part A :- Clear Water P/Plant , Cost Towards Supply, Installation, Testing And Commissioning Of Horizontal Split Casing Type Centrifugal Pump Make- Kirloskar /Mather & Platt /Wpil /Ksb Capable Of Discharging -57M3/Hr. Clear Water Against Total Head 42 Meters, Coupled With Suitable 3 Phase, 1450 Rpm, 50 Hz Tefc Sq. Cage Induction Motor Make- (Kirloskar/Cgl/Abb) Operated On 415+10% Volt Mounted On A Common M.S. Channel Fabricated Base Plate With Following Accessories- 1. Suitable Size N.R. Valve-01 No. 2. Suitable Size Sluice Valve-01 No. 3. Suitable Size Check Valve/Foot Valve-01 No. 4. Pressure Gauge -01 No. 5. M.S. Base Plate-01 No. 6. Tyre Coupling Set-01 No. Etc. All Complete With Nut And Bolts, Packings, Fitting & Fixing, Labor & Technician Etc. All Complete Job As Per Site Requirement And Direction Of E/I. , Cost Towards Taking Out Of Installed 20Hp C/F Pump Motor Set With Base Plate By Dismantling Of Old Foundation Bolt With Help Of Breakers, Demolition Of Foundation And Removing The Residuals Out From Pumping Plant. , Making Of New Plain Cement Concrete Foundation 5X3X3 Size & M.S. Joint 4″×6″-2 Nos. With Supplying All Mortar Materials & Foundation Bolts 6 Nos. With All Labor Tools And Tackles Loading Unloading With Alignment Leveling And Jointing As Per P.W.D. Specification (1:2:4) Etc. Plastering & Punning Over Exposed Surface. All Complete At Wtp Pump House. , Cost Towards Resetting Of Taken Out 20Hp C/F Pump Set With Base Plate At Already Made Plain Cement Concrete Foundation By Supplying Of Required Number Of Foundation Bolt As Suitable, Refitting, Realignment & Leveling Etc., With All Labor, Tools And Materials. , Cost For Making Gi/Ms Delivery Common Header With Supply And Laying Of 80Mm Dia Delivery Line, Supply/Fixing Of 80Mm Dia Heavy Duty Gi/Ms Pipe 10M,80Mm Dia Gi/Ms Bend- 2 Nos. , 80Mm Dia. Flange- 8Nos.80Mm Dia Pn 1.6 Double Flange N-R & Sluice Valve - 1 No. Each, Rubber Insertion-10Kg, Nut, Bolt, Washer, Reducer As Per Required With Cutting Of Pipe In Required Length And Doing Complete Welding Work And Fixing Nr Valve, Sluice Valve And Jointing To Rising Main Pipe Line As Required, Including Painting On Metal Surfaces All Complete Job With Materials,Tool, Tackles, Technician And Labors Charges.(Rate After Deducting The Scrap Materials.)For Both Pump Set. , Cost For Supply And Laying Of 80Mm Or Suitable Dia Suction Pipe Line As Per Supplied Pump Model For Newly Supplied Pump Set And Shifting And Laying Of 80Mm Dia Suction Pipe Line For Shifted 20 Hp Pump Set With Supply/Fixing Of 80Mm Dia Gi Pipe-13Mtr, 80Mm Dia Gi Bend -4 Nos, ,80Mm Dia Gi Flanged-12 Nos, Rubber Insertion - 12Kg, Nut, Bolt And Washer- 15Kg, Short Piece 80Mm Dia.- 2 Nos. Each , Cutting Of Pipe In Required Length And Doing Welding As Required, Including Painting On Metal Surfaces All Complete Job With Materials, Tools, Tackles, Technician And Labor Charges.(Rate After Deducting The Scrap Materials.) , Cost Towards Replacement Of Old Panel By Supplying, Installation & Commissioning Of New Free Standing Type Floor Mounting/Wall Mounting Industrial Panel Board Comprising Of 100 annual periodical maintenance Copper Bus Bar 04 Nos. In M.S. Steel (14Swg) Housing With Following Accessories- • 100 annual periodical maintenance T.P.N. Mccb Make-L&K/C&S/ Siemens/Schneider -01 No. As Incomer Feeder. • 63 annual periodical maintenance T.P.N Mccb Make L&K/C&S/HavellS/Schneider/Siemens - 2 Nos. As Outgoing Feeder. • 63 annual periodical maintenance -Spare Tpn Mccb Make L&K/C&S/HavellS /Schneider/Siemens -01 No. • Multi Protection Device (Mpd)-Phase Preventer, Over-Under Voltage Preventer, Overcurrent Preventer Etc.-02 Nos. For Both Starters Make-L&K/ Minilac / C&S/ Siemens / Schneider/Any Reputed Make. • Ammeter- Digital Ammeter-02 Nos. -L&K/C&S/Schneider/Any Reputed Make. • Voltmeter- Digital Voltmeter-01 Nos. In 3 Phase R-Y-B-L&K/C&S/Schneider/Any Reputed Make. • Indicating Lamp Led- In Red, Yellow And Blue Color-1 Set.(Phase Indicator) • 32 Amp. Mcb For Light Load And Other Loads Of L&K/HavelS/C&S/Schneider/Any Reputed Make-1 No. • Suitable Fasd Starter-02 Nos. (For 20 Hp Or More C/F Motor Pump Set) Make-L&K/C&S/Schneider Electric/ SiemenS. • Suitable Capacitor For Power Factor Correction-01 Set. • Panel Should Be Dully Painted With Two Coats Super Enameled Paint Of Approved Color One Coat Of Red Oxide Primer And Proper Power & Control Wiring Inside By Suitable Size Of Copper Conductor And Wires Etc. All Complete Set Including Transportation And Fitting & Mounting Charges At P/Plant. (Rate After Deduction Of Scrap Materials.) , Cost Towards Supply/Fixing Of Changeover Switch Tpn On Load With Sheet Steel Enclosure. Capacity 100 annual periodical maintenance For Bypass Arrangement Of Installed 50Kva Servo Voltage Stabilizer Make -C&S/HavellS/L&T With All Labor, Tools,Tackles And Materials. , Supplying And Fitting Of 415 Volt, S-D-F Fn 100 A Tpn Main Switch And Ss Enclosure Suitable For Din Fuse Link With Hrc Fuses Make- L&K/ HavellS/ C&S/Any Reputed Make With All Labor & Tools And Materials Installing At Pump House. , Supply, Installation, Testing and Commissioning Of 90/100 Watt Led Flood Lighting Luminaire With Pressure Die Cast Housing And Toughened Glass Cover(Ip 66 Protection)In Existing Pole/Pipe/Wall For Supply Voltage 100V-270V Ac,50Hz Luminaire Shall Be Confirm To Is:10322 Part-5/Section-5 And Shall Be Complete With All Necessary Accessories As Required. , Supply, Installation, Testing and Commissioning Of 90/100 Watt Led Street Lighting Luminaire With Pressure Die Cast Housing And Toughened Glass Cover(Ip 66 Protection)In Existing Pole/Pipe/Wall For Supply Voltage 100V-270V Ac,50Hz Luminaire Shall Be Confirm To Is:10322 Part-5/Section-3 And Shall Be Complete With All Necessary Accessories As Required. , Cost Towards Renovating Of Lighting Arrangement Of Wtp Pump House By Supply/Fixing Of On-Off Switch, 3-Pin Socket, Wooden/ Fiber Board, Dp With Box, Casing Pipe For Wiring, 9 Watt Led Bulb, Required Amount Of Wires And Cables Etc. At P/ Plant. , Cost Towards Repairing Of 150 Kva Oil Cooled Servo Voltage Stabilizer Working On Three Phase Input Voltage-240 To 400 V And Output-400±1%V. Make-Power Line With Following Works- Cost Towards Disconnection And Cleaning Of Stabilizer With All Labour Tools And Tackles. , Cost Towards Supply/Fixing Of Servo Motor As Per Sample-10 Kg.Cm Each. , Cost Towards Supply/Fixing Of Panel Sensing/Control Pcb Card As Per Sample. , R.C Kit , Control Transformer. , 3 Phase Digital Voltmeter (Input/Output) As Per Sample. , Armored And Shaft. , Cost Towards Adding Of Transformer Oil. , Cost Towards Complete Servicing And Repairing Cost Of Stabilizer With All Labour, Tools And Tackles And Electrician Charges Etc. All Complete Job And Testing On Full Load.

BOQ

Name of Work:- E-Quotation for renovation work of electromechanical components installsed at karow rural water supply scheme with supplying fitting of 50 kva servo voltage stabilizer, fasd starter, sulice & nr valve, led street light & allied works.
Sl. No. Item Description
1Part A :- Clear Water P/plant
2Cost towards supply, installation, testing and commissioning of Horizontal split casing type centrifugal pump Make- Kirloskar /Mather & Platt /WPIL /KSB capable of discharging -57m3/hr. clear water against total head 42 meters, coupled with suitable 3 phase, 1450 RPM, 50 Hz TEFC sq. cage induction motor Make- (Kirloskar/CGL/ABB) operated on 415+10% volt mounted on a common M.S. channel fabricated base plate with following accessories-1. Suitable size N.R. Valve-01 No.2. Suitable size sluice valve-01 No.3. Suitable size Check valve/Foot Valve-01 No.4. Pressure gauge -01 No.5. M.S. Base Plate-01 No.6. Tyre coupling set-01 No. etc. all complete with nut and bolts, packings, fitting & fixing, labor & technician etc. all complete job as per site requirement and direction of E/I.
3Cost towards taking out of installed 20HP C/F pump motor set with base plate by dismantling of old foundation bolt with help of breakers, demolition of foundation and removing the residuals out from pumping plant.
4Making of New PCC foundation 5’x3’x3’ size & M.S. joint 4″×6″-2 nos. with supplying all mortar materials & foundation bolts 6 Nos. with all labor tools and tackles loading unloading with alignment leveling and jointing as per P.W.D. Specification (1:2:4) etc. plastering & punning over exposed surface. All complete at WTP pump house.
5Cost towards resetting of taken out 20HP C/F pump set with base plate at already made PCC foundation by supplying of required number of foundation bolt as suitable, refitting, realignment & leveling etc., with all labor, tools and materials.
6Cost for making GI/MS Delivery common header with supply and laying of 80mm dia delivery line, S/F of 80mm dia heavy duty GI/MS pipe 10m,80mm dia GI/MS bend- 2 Nos. , 80mm dia. Flange- 8nos.80mm dia PN 1.6 double flange N-R & sluice valve – 1 No. each, rubber insertion-10kg, nut, bolt, washer, reducer as per required with cutting of pipe in required length and doing complete welding work and fixing NR valve, sluice valve and jointing to rising main pipe line as required, including painting on metal surfaces all complete job with materials,tool, tackles, technician and labors charges.(Rate after deducting the scrap materials.)For both pump set.
7Cost for supply and laying of 80mm or suitable dia suction pipe line as per supplied pump model for newly supplied pump set and shifting and laying of 80mm dia suction pipe line for shifted 20 HP pump set with S/F of 80mm dia GI pipe-13mtr, 80mm dia GI bend -4 Nos, ,80mm dia GI flanged-12 Nos, rubber insertion – 12kg, nut, bolt and washer- 15kg, short piece 80mm dia.- 2 nos. each , cutting of pipe in required length and doing welding as required, including painting on metal surfaces all complete job with materials, tools, tackles, technician and labor charges.(Rate after deducting the scrap materials.)
8Cost towards replacement of old panel by supplying, installation & commissioning of new free standing type floor mounting/wall mounting industrial panel board comprising of 100 amp copper bus bar 04 nos. in M.S. steel (14SWG) housing with following accessories-• 100 Amp T.P.N. MCCB make-L&k/C&S/ Siemens/Schneider -01 No. as incomer feeder.• 63 Amp T.P.N MCCB make L&k/C&S/Havell’s/Schneider/Siemens - 2 nos. as outgoing feeder.• 63 Amp -Spare TPN MCCB make L&k/C&S/Havell’s /Schneider/Siemens -01 No.• Multi protection device (MPD)-phase preventer, Over-Under voltage preventer, overcurrent preventer etc.-02 Nos. for both starters make-L&k/ Minilac / C&S/ Siemens / Schneider/Any reputed make.• Ammeter- digital ammeter-02 Nos. -L&k/C&S/Schneider/any reputed make.• Voltmeter- Digital voltmeter-01 Nos. in 3 phase R-Y-B-L&k/C&S/Schneider/any reputed make.• Indicating lamp LED- in Red, Yellow and Blue color-1 set.(Phase indicator)• 32 amp. MCB for light load and other loads of L&k/Havel’s/C&S/Schneider/Any reputed make-1 No.• Suitable FASD starter-02 Nos. (for 20 HP or more c/f motor pump set) Make-L&k/C&S/Schneider Electric/ Siemen’s.• Suitable Capacitor for power factor correction-01 set.• Panel should be dully painted with two coats super enameled paint of approved color one coat of red oxide primer and Proper power & control wiring inside by suitable size of copper conductor and wires etc. all complete set including transportation and fitting & mounting charges at P/Plant.(Rate after deduction of scrap materials.)
9Cost towards S/F of Changeover switch TPN on load with Sheet Steel enclosure. Capacity 100 Amp for bypass arrangement of installed 50kva servo voltage stabilizer Make –C&S/Havell’s/L&T with all labor, tools,tackles and materials.
10Supplying and fitting of 415 volt, S-D-F FN 100 A TPN main switch and SS enclosure suitable for DIN fuse link with HRC fuses make- L&k/ Havell’s/ C&S/any reputed make with all labor & tools and materials installing at pump house.
11S.I.T.C of 90/100 watt LED Flood lighting luminaire with pressure die cast housing and toughened glass cover(IP 66 Protection)in existing pole/pipe/wall for supply voltage 100V-270V AC,50Hz luminaire shall be confirm to IS:10322 Part-5/Section-5 and shall be complete with all necessary accessories as required.
12S.I.T.C of 90/100 watt LED street lighting luminaire with pressure die cast housing and toughened glass cover(IP 66 Protection)in existing pole/pipe/wall for supply voltage 100V-270V AC,50Hz luminaire shall be confirm to IS:10322 Part-5/Section-3 and shall be complete with all necessary accessories as required.
13Cost towards renovating of lighting arrangement of WTP Pump House by S/F of on-off switch, 3-Pin socket, wooden/ fiber board, DP with box, casing pipe for wiring, 9 Watt LED bulb, required amount of wires and cables etc. at P/ plant.
14Cost towards repairing of 150 KVA Oil cooled Servo Voltage Stabilizer working on three phase input Voltage-240 to 400 V and Output-400±1%V. Make-Power Line with following works-Cost towards disconnection and cleaning of stabilizer with all labour tools and tackles.
15Cost towards S/F of servo motor as per sample-10 kg.cm each.
16Cost towards s/f of Panel Sensing/control PCB Card as per sample.
17R.C kit
18Control transformer.
193 phase Digital Voltmeter (Input/Output) As Per sample.
20Armored and shaft.
21Cost towards adding of transformer oil.
22Cost towards complete servicing and repairing cost of stabilizer with all labour, tools and tackles and electrician charges etc. all complete job and testing on full load. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58050588
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 23-10-2026
Authority
Authority Name Drinking Water And Sanitation Department
Work Description Tender for E-Quotation For Renovation Work Of Electromechanical Components Installsed At Karow Rural Water Supply Scheme With Supplying Fitting Of 50 Kva Servo Voltage Stabilizer, Fasd Starter, Sulice & Nr Valve, Led Street Light & Allied Works. , Part A :- Clear Water P/Plant , Cost Towards Supply, Installation, Testing And Commissioning Of Horizontal Split Casing Type Centrifugal Pump Make- Kirloskar /Mather & Platt /Wpil /Ksb Capable Of Discharging -57M3/Hr. Clear Water Against Total Head 42 Meters, Coupled With Suitable 3 Phase, 1450 Rpm, 50 Hz Tefc Sq. Cage Induction Motor Make- (Kirloskar/Cgl/Abb) Operated On 415+10% Volt Mounted On A Common M.S. Channel Fabricated Base Plate With Following Accessories- 1. Suitable Size N.R. Valve-01 No. 2. Suitable Size Sluice Valve-01 No. 3. Suitable Size Check Valve/Foot Valve-01 No. 4. Pressure Gauge -01 No. 5. M.S. Base Plate-01 No. 6. Tyre Coupling Set-01 No. Etc. All Complete With Nut And Bolts, Packings, Fitting & Fixing, Labor & Technician Etc. All Complete Job As Per Site Requirement And Direction Of E/I. , Cost Towards Taking Out Of Installed 20Hp C/F Pump Motor Set With Base Plate By Dismantling Of Old Foundation Bolt With Help Of Breakers, Demolition Of Foundation And Removing The Residuals Out From Pumping Plant. , Making Of New Plain Cement Concrete Foundation 5X3X3 Size & M.S. Joint 4″×6″-2 Nos. With Supplying All Mortar Materials & Foundation Bolts 6 Nos. With All Labor Tools And Tackles Loading Unloading With Alignment Leveling And Jointing As Per P.W.D. Specification (1:2:4) Etc. Plastering & Punning Over Exposed Surface. All Complete At Wtp Pump House. , Cost Towards Resetting Of Taken Out 20Hp C/F Pump Set With Base Plate At Already Made Plain Cement Concrete Foundation By Supplying Of Required Number Of Foundation Bolt As Suitable, Refitting, Realignment & Leveling Etc., With All Labor, Tools And Materials. , Cost For Making Gi/Ms Delivery Common Header With Supply And Laying Of 80Mm Dia Delivery Line, Supply/Fixing Of 80Mm Dia Heavy Duty Gi/Ms Pipe 10M,80Mm Dia Gi/Ms Bend- 2 Nos. , 80Mm Dia. Flange- 8Nos.80Mm Dia Pn 1.6 Double Flange N-R & Sluice Valve - 1 No. Each, Rubber Insertion-10Kg, Nut, Bolt, Washer, Reducer As Per Required With Cutting Of Pipe In Required Length And Doing Complete Welding Work And Fixing Nr Valve, Sluice Valve And Jointing To Rising Main Pipe Line As Required, Including Painting On Metal Surfaces All Complete Job With Materials,Tool, Tackles, Technician And Labors Charges.(Rate After Deducting The Scrap Materials.)For Both Pump Set. , Cost For Supply And Laying Of 80Mm Or Suitable Dia Suction Pipe Line As Per Supplied Pump Model For Newly Supplied Pump Set And Shifting And Laying Of 80Mm Dia Suction Pipe Line For Shifted 20 Hp Pump Set With Supply/Fixing Of 80Mm Dia Gi Pipe-13Mtr, 80Mm Dia Gi Bend -4 Nos, ,80Mm Dia Gi Flanged-12 Nos, Rubber Insertion - 12Kg, Nut, Bolt And Washer- 15Kg, Short Piece 80Mm Dia.- 2 Nos. Each , Cutting Of Pipe In Required Length And Doing Welding As Required, Including Painting On Metal Surfaces All Complete Job With Materials, Tools, Tackles, Technician And Labor Charges.(Rate After Deducting The Scrap Materials.) , Cost Towards Replacement Of Old Panel By Supplying, Installation & Commissioning Of New Free Standing Type Floor Mounting/Wall Mounting Industrial Panel Board Comprising Of 100 annual periodical maintenance Copper Bus Bar 04 Nos. In M.S. Steel (14Swg) Housing With Following Accessories- • 100 annual periodical maintenance T.P.N. Mccb Make-L&K/C&S/ Siemens/Schneider -01 No. As Incomer Feeder. • 63 annual periodical maintenance T.P.N Mccb Make L&K/C&S/HavellS/Schneider/Siemens - 2 Nos. As Outgoing Feeder. • 63 annual periodical maintenance -Spare Tpn Mccb Make L&K/C&S/HavellS /Schneider/Siemens -01 No. • Multi Protection Device (Mpd)-Phase Preventer, Over-Under Voltage Preventer, Overcurrent Preventer Etc.-02 Nos. For Both Starters Make-L&K/ Minilac / C&S/ Siemens / Schneider/Any Reputed Make. • Ammeter- Digital Ammeter-02 Nos. -L&K/C&S/Schneider/Any Reputed Make. • Voltmeter- Digital Voltmeter-01 Nos. In 3 Phase R-Y-B-L&K/C&S/Schneider/Any Reputed Make. • Indicating Lamp Led- In Red, Yellow And Blue Color-1 Set.(Phase Indicator) • 32 Amp. Mcb For Light Load And Other Loads Of L&K/HavelS/C&S/Schneider/Any Reputed Make-1 No. • Suitable Fasd Starter-02 Nos. (For 20 Hp Or More C/F Motor Pump Set) Make-L&K/C&S/Schneider Electric/ SiemenS. • Suitable Capacitor For Power Factor Correction-01 Set. • Panel Should Be Dully Painted With Two Coats Super Enameled Paint Of Approved Color One Coat Of Red Oxide Primer And Proper Power & Control Wiring Inside By Suitable Size Of Copper Conductor And Wires Etc. All Complete Set Including Transportation And Fitting & Mounting Charges At P/Plant. (Rate After Deduction Of Scrap Materials.) , Cost Towards Supply/Fixing Of Changeover Switch Tpn On Load With Sheet Steel Enclosure. Capacity 100 annual periodical maintenance For Bypass Arrangement Of Installed 50Kva Servo Voltage Stabilizer Make -C&S/HavellS/L&T With All Labor, Tools,Tackles And Materials. , Supplying And Fitting Of 415 Volt, S-D-F Fn 100 A Tpn Main Switch And Ss Enclosure Suitable For Din Fuse Link With Hrc Fuses Make- L&K/ HavellS/ C&S/Any Reputed Make With All Labor & Tools And Materials Installing At Pump House. , Supply, Installation, Testing and Commissioning Of 90/100 Watt Led Flood Lighting Luminaire With Pressure Die Cast Housing And Toughened Glass Cover(Ip 66 Protection)In Existing Pole/Pipe/Wall For Supply Voltage 100V-270V Ac,50Hz Luminaire Shall Be Confirm To Is:10322 Part-5/Section-5 And Shall Be Complete With All Necessary Accessories As Required. , Supply, Installation, Testing and Commissioning Of 90/100 Watt Led Street Lighting Luminaire With Pressure Die Cast Housing And Toughened Glass Cover(Ip 66 Protection)In Existing Pole/Pipe/Wall For Supply Voltage 100V-270V Ac,50Hz Luminaire Shall Be Confirm To Is:10322 Part-5/Section-3 And Shall Be Complete With All Necessary Accessories As Required. , Cost Towards Renovating Of Lighting Arrangement Of Wtp Pump House By Supply/Fixing Of On-Off Switch, 3-Pin Socket, Wooden/ Fiber Board, Dp With Box, Casing Pipe For Wiring, 9 Watt Led Bulb, Required Amount Of Wires And Cables Etc. At P/ Plant. , Cost Towards Repairing Of 150 Kva Oil Cooled Servo Voltage Stabilizer Working On Three Phase Input Voltage-240 To 400 V And Output-400±1%V. Make-Power Line With Following Works- Cost Towards Disconnection And Cleaning Of Stabilizer With All Labour Tools And Tackles. , Cost Towards Supply/Fixing Of Servo Motor As Per Sample-10 Kg.Cm Each. , Cost Towards Supply/Fixing Of Panel Sensing/Control Pcb Card As Per Sample. , R.C Kit , Control Transformer. , 3 Phase Digital Voltmeter (Input/Output) As Per Sample. , Armored And Shaft. , Cost Towards Adding Of Transformer Oil. , Cost Towards Complete Servicing And Repairing Cost Of Stabilizer With All Labour, Tools And Tackles And Electrician Charges Etc. All Complete Job And Testing On Full Load.
Basic Detail
Tender No E-quotation No. 06 2026-27
Bidding Type Tender
Location
City Dumka
State Jharkhand
Key Dates
Publish Date 15 Oct 2026
Submission Date 23 Oct 2026
Open Date 24 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
99730add-8aa2-4feb-bfdf-0736a74abd05.html
BOQ_162137.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 15, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Oct 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

99730add-8aa2-4feb-bfdf-0736a74abd05.html

xls

BOQ_162137.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender