Tender For Design, Manufacture, Supply, Assembly, Testing, Installation And Commissioning Of Plug Type Fan Air Handling Unit (Ahu) With Associated Work For Ff-Inrp(O), Nrb, Barc, Tarapur.
Tender Value
22 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
10 days left
EMD
44000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palghar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Design, Manufacture, Supply, Assembly, Testing, Installation And Commissioning Of Plug Type Fan Air Handling Unit (Ahu) With Associated Work For Ff-Inrp(O), Nrb, Barc, Tarapur.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of old damage AHU, ducting, MS pipe line, GI drain line, dampers, support etc & shifting in to scrap yard within 2 km distance as directed by the Engineer In Charge. |
| 2 | Design, Supply, Installation, Testing and commissioning of floor mounted double skin type air handling unit (AHU) made of 45mm thick panels consisting of pre powder coated G.I. sheet of thickness 0.8 mm outside layer and inside layer with polyurethane foam (PUF) insulation between them by injection moulding machine, 18 G thickness stainless steel 304 drain pan with PUF insulation, drain connections, vibration isolation pads etc. complete with plug fan having capacity10000 CFM @ 60 mm static pressure, minimum 3 pass PVC Mist eliminators, 6 row cooling coil section made out of 1/2\\" dia. copper tube with 22 SWG thickness & 0.2 mm thick aluminum fins, air filters, suitable 3 Phase direct drive EC motor. |
| 3 | Supply, Installation, Testing & Commissioning of 3\\" Dia. mild steel class \\"C\\" (Black) ERW (IS 1239) pipe lines for AHU including all necessary fittings, wooden blocks, MS supports etc as per site requirement, & connection to existing lines. Provided 50 mm thick nitrile rubber fire retardant thermal insulation having density of 50 Kg/M3 , thermal conductivity at 46 degree C-0.037 wmk, with 26SWG aluminum cladding as per technical specifications. |
| 4 | Supply, Installation, Testing & Commissioning of 2\\" dia. GI pipe drain line for AHU including all necessary fittings, MS support, 25 mm thick nitrile rubber fire retardant thermal insulation along with 26 SWG aluminum cladding as per technical specifications. |
| 5 | Supply and installation of gear operated butterfly valves of size 3\\" Dia. having PN10 standards with necessary flange, nut & Bolts, 50 mm thick Nitrile Rubber insulation & 26 SWG aluminum cladding etc as reqd. |
| 6 | Supply, fabrication, installation, testing & commissioning of POT strainer or Y type strainer having size 4\\" with stainless steel 304 element having 60 mesh suitably supported on plate with all necessary fittings. |
| 7 | Providing, fixing & testing of Bourdon S.S Pressure Gauge of range 0-7 kg/cm2 for water medium application having dial size 4\\" (100 mm) with resolution of 0.5 kg/cm2, operating temperature up to 50 oC, connection 3/8” BSP with bottom mounting with all accessories (Reputed Make ) |
| 8 | Providing, fixing &testing of S.S Thermometer of range-0 to 50ºC, size- 4\\" dia. dial type, with all accessories. ( Reputed Make ) |
| 9 | Providing, fixing &testing of 25mm dia. Ball Valve with necessary accessories etc. |
| 10 | Providing, fixing &testing of 25mm Dia. Air Release Valve with necessary accessories etc. |
| 11 | Supply, Fabrication, Installation & Testing of plenum/ducting to connects AHU for different rooms made of 22 SWG GI sheet with elbows, turning vanes, neoprene / PVC gasket, angle-iron flanges joints, GI rods Supports / Hanger with threaded end etc as per site requirement. |
| 12 | Supply and fixing of 25 mm thick closed-cell nitrile rubber elastomeric thermal insulation having density approximately 50 kg/m³ and thermal conductivity not exceeding 0.037 W/m·K at 46°C on all ducting and 50mm thick insulation on all chilled water pipe lines & valves etc., including approved fire-retardant properties, complete with 26SWG aluminum cladding. All joints and seams should be secured with self adhesive nitrile rubber tape of 50 mm width as per technical specifications. |
| 13 | Supply, fabricatin and installation of MS foundation suitable for installation of new AHU. MS foundation should be fabricated with MS channel, MS plate or GI pipe as directed by the Engineer In Charge. |
| 14 | Supply, Installation & Testing of 18 SWG aluminum diffusers for supply air having size 600x600mm (or as per site conditions) with control damper. |
| 15 | Supply, Installation & Testing of 18 SWG aluminum diffusers for return air having size 600x600mm (or as per site conditions) without control damper. |
| 16 | Providing opening on the wall for laying out the supply air duct and finish the opening with send cement plaster having size 300mm x 1200mm. |
| 17 | Supplying of Bearing suitable for new AHU blower |
| 18 | Supplying of suitable washable type air filters for AHU |
| 19 | Supplying of 18 SWG aluminum diffusers with flow control damper for supply air having size 450x450mm |
| 20 | Supplying of 18 SWG aluminum diffusers without flow control damper for return air having size 450x450mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender