Tender For Additional Building With Training Hall For Ado Office, Talacher
Tender Value
37.18 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
0 days left
EMD
37200
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhenkanal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional Building With Training Hall For Ado Office, Talacher
BOQ
| Sl. No. | Item Description |
| 1 | Site clening, cutting of bushes and removal of debris from the work site. |
| 2 | Dismantling brick or stone masonry in lime or cement mortar under 3m height, including stacking the useful materials for reuse and removing the debris within 50 m. Lead per 1 cum Data for 2.83 cum |
| 3 | Earth work in excavation of foundation in all kinds of soil including moorum, stony earth mixed with boulders (except sheet rocks and boulders requiring blasting) with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the works etc. complete as directed by the Engineer-in-charge. |
| 4 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will betaken on finished compacted section only). |
| 5 | C.C.( 1:3:6) in foundation and floors using 4cm (1½”) size HGCB metal with all labour,cess and T&P required for the work etc. complete in all respect. |
| 6 | R.C.C. work M-20 grade using 20mm and 10mm size black hard crusher broken granite chips including hoisting lowering laying and centring shuttering and finishing the exposed surface smooth providing groves or beds wherever necessary including cost, conveyance, royalties and excluding GST and cost of all materials and labour with T & P required for the work etc. complete in all respect excluding the cost of M.S. Rods or Tor steel and binding wires and labour charge for bending binding and tying grills as directed by the Engineer – in charge. Ground Floor Column base, frustum |
| 7 | Plinth Band |
| 8 | Lintel |
| 9 | Column and beam |
| 10 | Chajja |
| 11 | Roof Slab |
| 12 | Staircase |
| 13 | First Floor Column and beam |
| 14 | Lintel |
| 15 | Chajja |
| 16 | Roof Slab |
| 17 | Staircase |
| 18 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification including cost, conveyance and excluding GST of all materials with labour, cess and T&P etc. required for the work complete. Ground Floor |
| 19 | First Floor |
| 20 | Fly Ash brick masonry in cement mortar (1:6) in Plinth & Foundation work using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and excluding GST of all materials with all labour, cess and T&P required for the work complete in all respect in all floors. |
| 21 | Fly Ash brick masonry in cement mortar (1:6) in Super strucutre work using fly ash bricks of 23cm x 11cm x8cm size having a crushing strength of not less than 75kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similarsuch type of works with all necessary projections watering and curing including cost, conveyance, royalties and excluding GST of all materials with all labour, cess and T&P required for thework complete in all respect in all floors. Ground Floor |
| 22 | First Floor |
| 23 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect. Ground Floor |
| 24 | First Floor |
| 25 | 16 mm (5/8”) thick cement plaster (1:6) finished smooth to inside rough surface of 9”/10” thick brick walls after rakingout the joints including watering and curing with cost withcost, conveyance, royalties and excluding GST of all materialswith all labour, T&P required for the work etc. complete. Ground Floor |
| 26 | First Floor |
| 27 | 12 mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the jointincluding watering and curing with cost, conveyance, royaltiesand excluding GST of all materials with all labour and T&Prequired for the work etc. complete in all respect. Ground Floor |
| 28 | First Floor |
| 29 | 20 mm thick grading plaster in c.m. 1:4 over roof slab and chajja including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 30 | Fixing of Vitrified (60 cm x 60 cm printed series) in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles in ground floor. Ground Floor |
| 31 | First Floor |
| 32 | Fixing of Vitrified tiles 60 cm x 60 cm (printed series) series in dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles in ground floor. |
| 33 | First Floor |
| 34 | Fixing of ceramic tiles in floors, treads or steps and landing of steps on 25mm thick cement plaster in mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles per 1 sqm Ground Floor |
| 35 | First Floor |
| 36 | Fixing Ceramic tiles in Dado, Skirting and rises of steps on 12 mm thick cement mortar [1:3] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect. Ground Floor |
| 37 | First Floor |
| 38 | Fixing of Granite tiles in floors, treads or steps and landing of steps on 25mm thick cement plaster in mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles. Ground Floor |
| 39 | First Floor |
| 40 | Finishing wall surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials excluding GST, labour T&P etc complete. Ground Floor |
| 41 | First Floor |
| 42 | Priming one coat to wall surface with water bound cement primer including cost, conveyance,excluding GST of all materials, labour and T&P etc. complete Ground Floor |
| 43 | First Floor |
| 44 | Painting two coats with plastic emulsion paint of approved shade on new work to give an even shade inculding cost of paint as per direction of Engg-in-Charge Ground Floor |
| 45 | First Floor |
| 46 | Painting two coats with weather seal coat paint over a coat of water bound cement primer including cost, conveyance, excluding GST of all materials, labour and T&P etc. complete. Ground Floor |
| 47 | First Floor |
| 48 | Providing, fitting and fixing of Al door with OEL anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12 mm prelaminated board fixed on door frame by means of tapered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc complete. Ground Floor |
| 49 | First Floor |
| 50 | Providing, fitting and fixing of decorative flush door made up with 32 mm thick BWR grade block board and subsiquently finished with 1 mm thick laminates of approved shade on both side, fixed by synthetic adhesive and headless pins with all door accessory etc. complete as per direction of Engineer in charge. |
| 51 | Supplying, fitting, and fixing of two-track UPVC sliding window of approved make with 6mm thick glass of approved quality, complete with frame, shutters, and all fittings and fixtures. |
| 52 | Supplying, fitting and fixing of powder coated G.I. collapsible gate/Window grill/Ventilator etc made out of M.S. square bar / M.S. flats / M.S. angles as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction in all floors. |
| 53 | Primimg one coat with any approved red oxide primer over iron works including cost of primer. Ground Floor |
| 54 | First Floor |
| 55 | Painting two coats with approved paint over the surface including cost of paint Ground Floor |
| 56 | First Floor |
| 57 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2m min 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, excluding GST of all materials, labour, T&P etc. required for the complete in all respect. |
| 58 | Providing, fitting and fixing of conference hall dias table / Office Table made up with 19 mm thick phenol bounded BWR grade Ply Wood and subsequently finished with 1 mm thick BWR grade decorative laminates of approved shade on required size/side over wooden frame fixed with raw plug including drilling of necessary holes fixed by synthetic adhesive and headless pins with all accessory etc complte as per direction of engineer in charge. |
| 59 | Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI / PVC pipes and fittings etc all complete as per specification and direction of the Engineer -in-charge. |
| 60 | Cutting grooves in pucca floors and walls for taking GI / PVC pipes and making good the damages as per specification and direction of the Engineer -in-charge. |
| 61 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. 20 mm dia PVC pipe in ground floor |
| 62 | 25 mm dia PVC pipe in ground floor |
| 63 | Supplying all materials, labour, T & P in all floors for fitting & fixing of U-PVC fixtures of the following diameter including supply of required jointing materials etc. all complete 25mm dia Ball Valve |
| 64 | 25mm dia Union |
| 65 | 25mm dia Elbow |
| 66 | 25mm dia Tee |
| 67 | 20mm dia Elbow |
| 68 | 20mm dia Tee |
| 69 | (20x15)mm RS / FTA / MTA |
| 70 | Laying in trenches PVC pipes conforming to IS:4985-2000 and specials of the 110 mm OD P.V.C. SWR S/S Pipe (ISI type-A) including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete. |
| 71 | Providing and fixing on wall face 110 mm OD P.V.C. SWR S/S Pipe (ISI type-A) soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes |
| 72 | Providing and fixing on wall face PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110mm dia PVC SWR Coupler |
| 73 | 110 x 110 x 110mm dia PVC SWR Tee |
| 74 | 110 x 110 x 110mm dia PVC SWR Door Tee |
| 75 | 110 mm dia P.V.C. SWR Plain Bend 87.5° |
| 76 | 111 mm dia P.V.C. SWR Door Bend 87.5° |
| 77 | 110 mm dia P.V.C. SWR Plain Bend 45° |
| 78 | 110 mm dia P.V.C. SWR Vent Cowl |
| 79 | 110 mm dia P.V.C. SWR Pipe Clip |
| 80 | Fixing Wash Down Water Closet (European type W.C pan) with integral or trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as perspecification. |
| 81 | Providing and fixing 10 litre capacity - White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete |
| 82 | Suppying and fixing Porcelain 22\\"x 16\\" (550x400) Wash Hand Basin with approved make & model with CI brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc including fixing Chromium Plated waste pipe of 32 mm nominal diameter, Chromium Plated Pillar taps & Chromium Plated Angle Valve of 15 mm dia nominal bore with approved make & model, 15 mm dia PVC inlet connection pipe as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC. |
| 83 | Supplying and fitting of C.P. Grating at proper place pipe as per specification. |
| 84 | Fixing standard sized Chromium Plated brass Towel Rail [600x20 mm] complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification |
| 85 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification. |
| 86 | Supplying, fitting and fixing of glass shelf with brackets and all accessories. |
| 87 | Fixing C.P.soap holder / disc fixed to wooden plugs with Chromium Plated brass screws as per specification. |
| 88 | Supplying and fitting 15mm dia C.P. long body bib cock with supply of all jointing materials as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC. |
| 89 | Supplying and fitting 15mm dia C.P. short body bib cock with supply of all jointing materials as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC. |
| 90 | Supplying and fitting Brass / GM Full Way Valve (ISI Marked) of 32 mm nominal bore with supply of all jointing materials as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC. |
| 91 | Fixing 1000 litre capacity Double Layer Cylinderical Vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5.00 metres above ground level and placing the tank to the required position over RCC beam and R.C.C. slab along with provision of brick work in CM (1:6) for circular protection wall around the tank including centering, shutering, watering, conveyance of all materials etc- all complete.etc all complete as per specification and direction of the Engineer in charge 1000 lit PVC tank |
| 92 | Staging with RCC and brick work |
| 93 | Recessed wiring to light point / Fan point / Exhaust fan point / Call bell point with 1.5 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non- metallic PVC flexible conduit with 5A 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire - Finolex / L&T / Anchor / Havells / V-Guard) Gr-B |
| 94 | Providing, Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 95 | Providing, Supplying and fixing of metal box of 180mmx100mmx60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover infront including providing and fixing 5pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, paintingetc as required. (For light plugs to be used in non residential buildings) complete includingcost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 96 | Recessed wiring to submain with following Sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work as per the direction of the EIC. 2 x 2.5 sqmm + 1 x 1.5 sqmm |
| 97 | 2 x 4.0 sqmm + 1 x 1.5 sqmm |
| 98 | 2 x 6.0 sqmm + 1 x 2.5 sqmm |
| 99 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required (But without MCB/ RCCB/ ISOLATOR) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 100 | Providing & Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the worketc. complete as per the direction of the EIC. |
| 101 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 102 | Supply and fixing of 5 amp to 32 amp rating 240 V \\"B\\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 103 | Supply, Installation, Testing, and Commissioning of 63 amp ICDP main switch of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. Make- SEIMENS /HPL /ANCHOR /L&T /HAVELS /C & S/ RK |
| 104 | Supply, Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm ) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 105 | Supply, Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FRPVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 106 | Supplying, fitting and fixing of 16'' size wall mounted fan ( Usha / Havells / Bajaj / Crompton) |
| 107 | Installation, testing and commissioning of exhaust fan 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 108 | Supplying, fitting and fixing of 9 Watt Circular recessed LED fittings (Usha / Bajaj / Philips / Crompton / Havells etc.) |
| 109 | Supplying, fitting and fixing of 18 watt ( 1' x 1' ) Square recessed LED fittings (Usha / Bajaj / Philips / Crompton / Havells etc.) |
| 110 | Supply and fitting of 50 watt LED street light with all fitting & accessories (Usha / Bajaj / Philips / Crompton / Havells etc.) |
| 111 | Supply and fitting of 20 watt LED bulb |
| 112 | Supply and fitting of 6 mm2 PVC twin core Aluminium wire with G.I wire for service connection. |
| 113 | Supply and fitting of AC point consisting of 32 Amp DP MCB and Stator with all connection complete in all respect as per the direction of EIC in all floors Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender