Tender For Repair And Maintenance Of Godowns And Adminstrative Building At Rtsd,Satyanagar,Bhubaneswar.
Tender Value
5.73 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
13 days left
EMD
11470
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Godowns And Adminstrative Building At Rtsd,Satyanagar,Bhubaneswar.
BOQ
| Sl. No. | Item Description |
| 1 | Sub-Head : Dismantling and Demolishing |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 3 | In cement mortar |
| 4 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 5 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 6 | 100 mm dia pipe |
| 7 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 8 | Sub-Head : Earth Work |
| 9 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 10 | Sub-Head : Concrete Work |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 12 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 13 | Sub-Head : Reinforced Cement Concrete |
| 14 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 16 | Cold twisted bars |
| 17 | Sub-Head : Masonry Work |
| 18 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : |
| 19 | Cement mortar 1:6 (1 cement : 6 Coarse sand) |
| 20 | Sub-Head : Steel Work |
| 21 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 22 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 23 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 24 | Sub-Head : Flooring |
| 25 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 26 | Sub-Head : Roofing |
| 27 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 28 | Bend 87.5° |
| 29 | 110 mm bend |
| 30 | Shoe (Plain) |
| 31 | 110 mm Shoe |
| 32 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 33 | 110 mm |
| 34 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 35 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
| 36 | Ridges plain (500 - 600mm) |
| 37 | Sub-Head : Water Proofing |
| 38 | Grading roof for water proofing treatment with |
| 39 | Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 40 | Sub-Head : Finishing |
| 41 | 12 mm cement plaster of mix : |
| 42 | 1:6 (1 cement: 6 coarse sand) |
| 43 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 44 | 1:6 (1 cement: 6 coarse sand) |
| 45 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 46 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 47 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 48 | Old work (one or more coats) |
| 49 | Sub-Head : Repairs to Buildings |
| 50 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 51 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 52 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 53 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 54 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. |
| 55 | Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 56 | 3 mm thick |
| 57 | Sub-Head : Sanitary Installations |
| 58 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 59 | 10 litre capacity - White |
| 60 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 61 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 62 | Semi rigid pipe |
| 63 | 32 mm dia |
| 64 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 65 | Rectangular shape 453x357 mm |
| 66 | Sub-Head : Water Supply |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 68 | 15 mm nominal outer dia .Pipes. |
| 69 | 20 mm nominal outer dia .Pipes. |
| 70 | 25 mm nominal outer dia .Pipes. |
| 71 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 72 | 40 mm nominal outer dia. Pipes. |
| 73 | 50 mm nominal outer dia. Pipes. |
| 74 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 75 | 30 cm length |
| 76 | 15 mm nominal bore |
| 77 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 78 | 15 mm nominal bore, 165 mm long. Weighing not less than 110 gms. |
| 79 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 80 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 81 | Sub-Head : NEW TECHNOLOGIES AND MATERIALS |
| 82 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 83 | 50 mm average thickness |
| 84 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 85 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. |
| 86 | Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/ reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. |
| 87 | Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc. |
| 88 | (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) |
| 89 | 75mm thick in Grade M 25 with cement content not less than 330 kg per cum |
| 90 | SH- MARKET RATED ITEMS |
| 91 | Providing & fixing PVC ball valve with handle of approved quality in existing pipe line including removing the damaged valve etc. all complete as per the direction of Engineer-in-Charge. |
| 92 | 25 mm dia pvc gate valve |
| 93 | 40 mm dia pvc gate valve |
| 94 | 50 mm dia pvc gate valve |
| 95 | Providing and laying under ground unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382 or with solvent cement & testing of joints etc all complete as per direction of Engineer-in-charge. Trenching & refilling of excavated soil to be paid extra. (a) Single socketed pipes. (i) 150 mm dia |
| 96 | Cleaning of choked manhole chambers including removing the waste & sludge deposits and flushing of sewer line between manholes with sufficient water while rodding with split bamboo etc. all complete as per direction of Engineer-in-Charge. |
| 97 | Credit for taking into possession unserviceable dismantled GI / CI pipes & fittings. |
| 98 | Old damaged iron grills/GI / CI pipes & fittings. |
| 99 | Credit for taking away unserviceable recovered water supply fittings / fixutures as is where is : |
| 100 | Unserviciable Brass Bib/stop cocks/pillar tap |
| 101 | Unserviceable damaged PVC cistern. |
| 102 | Unserviciable Brass valve 256 mm to 40 mm dia |
| 103 | Providing and fixing PVC union in New PVC pipe including cutting and threding the pipe and making good all complete as per the direction of E-I-C. |
| 104 | 25 mm dia pvc Union |
| 105 | 40mm dia pvc Union |
| 106 | 50mm dia pvc Union |
| 107 | Supplying & engaging unskilled labour along with T&P for cleaning of roof terrace, chajja, rain water pipe mouth, drains & cleaning of bushes from roof terrace etc. as & when required and as per direction of Engineer-in-Charge. |
| 108 | Uprooting/Removing trees and plants from roof and walls of building upto any height either by physically uprooting or by pressure spraying suitable herbicide solution like GLYPHOSATE 41% SL (Trade name GLYPHO STAR) of Vedic Agro Science PVT. Ltd or other equivalent product with all due precautions on the entire plant organs as per company's recommendations and insructions including making good the damages caused with cement plaster 1:4 or cement concrete 1:2:4 as needed etc. all complete. The rate includes all materials, labour, T&P & incidentals etc. complete but excluding the cost of scaffolding, if applicable, which will be paid for separately. |
| 109 | Providing & erecting single scaffolding system on the external side of building upto three storey height made of best quality bamboo ballies @ 1.5 m centre to centre in both directions including bracing & stiffening as required. |
| 110 | Shifting and re-fixing of scaffolding materials for removing trees from the external walls and roofs beyond 1st floor level of Tech. Bldg./SQ Bldg. up to height about 10.00 mtr.as per the direction of E-I-C. |
| 111 | Providing & fixing PVC Water tank cover of approved quality all complete as per the direction of EIC. |
| 112 | Removal of old Tarfelt bfrom terrace roof surface i/c cleaning the roof for further laying of APP over the roof surface all complete as per direction of EIC. |
| 113 | Easing and oiling and greasing of Rolling shutter of size 4.00x 3.60 mtr for free movement i/c replacing the spring and repairing of the shutter all complete as per direction of EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender