Tender For Providing Pvc Oh Water Tank For D5 Block, Qtr No.25, 27 & 29 And Demolition Of Existing Dilapidated Reinforced Cement Concrete Platform Including Miscellaneous Civil Work At P&T Complex, Satellite Road, Ahmedabad.
Tender Value
2.52 Lakhs
Estimated cost
Bid Submission
24 Oct 2026
3 days left
EMD
5056
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmedabad → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Pvc Oh Water Tank For D5 Block, Qtr No.25, 27 & 29 And Demolition Of Existing Dilapidated Reinforced Cement Concrete Platform Including Miscellaneous Civil Work At P&T Complex, Satellite Road, Ahmedabad.
BOQ
| Sl. No. | Item Description |
| 1 | 15 mm cement plaster on the rough side of single or half brick wall of mix : (a) 1:6 (1 cement: 6 fine sand) |
| 2 | 6 mm cement plaster of mix : (a) 1:3 (1 cement: 3 fine sand) |
| 3 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). |
| 4 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. (a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 5 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 6 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : (a) 75 to 80 mm dia pipe |
| 7 | 100 mm dia pipe |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 9 | Providing and fixing on wall face unplasticised Rigid PVC drainage pipes conforming to IS : 13592 Type B, including jointing with solvant cement all complete as per direction of Engineer in Charge. (a) 90 mm diameter |
| 10 | 110 mm diameter |
| 11 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC dainage pipes, jointing with solvant cement and connecting with existing cast iron NT or P trap of WC with cement, Mseal etc. and plugging the hole with cement mortar all complete as per direction of Engineer in Charge |
| 12 | Single tee without door including one coupler |
| 13 | 90x90x90 mm |
| 14 | 110x110x110 mm |
| 15 | 90 mm |
| 16 | 110 mm |
| 17 | Cowel |
| 18 | 90 mm |
| 19 | 110 mm |
| 20 | Coupler |
| 21 | 90 mm |
| 22 | 110 mm |
| 23 | Providing and fixing clamps made of MS flat 20x5mm and fixing to wall by Jasti Killa (Nails) for supporting PVC dainage pipes including painting with red oxide paint all complete as per direction of Engineer in Charge. (a) 90 mm dia pipes |
| 24 | 110 mm dia pipes |
| 25 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 26 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. (a) 25 mm average thickness |
| 27 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. (a) Bar upto 12 mm dia |
| 28 | Providing and applying Epoxy passivate coat of Dr. Fixit Epoxy Zinc Primer or approved equivalent over exposed, cleaned, new/old reinforcing bars to provide a continuos film around the reinforcing bar as per manufacturer's specifications and as per the direction of Engineer-in-charge. ( Area of the RCC surface as before the application of treatment is to be measured for payment ) |
| 29 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). (a) 12 mm average thickness. |
| 30 | 25 mm average thickness in 2 layers. |
| 31 | Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members with cement concrete 1:1.5:3 (1 Cement:1.5 coarse sand:3 stone aggregate of 10 mm nominal size) with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super-Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) (a) 50mm thick in cement concrete 1:1.5:3 |
| 32 | Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. |
| 33 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. (a) 20 mm average thickness. |
| 34 | Providing square base support for pvc water tank made of 2 layer brick work with 1\\" thick pcc on top and finishing with plaster all complete as per direction of engineer in charge. (Size 45\\"x 45\\" approx.) |
| 35 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. (a) Internal Work- Exposed on wall |
| 36 | Providing and fixing UPVC (Schedule 80) pipes, including all UPVC plain fittings, including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 37 | Internal work - Exposed on wall |
| 38 | 20 mm nominal bore |
| 39 | 25 mm nominal bore |
| 40 | Providing and fixing UPVC valve of approved quality : (a) 25 mm nominal bore |
| 41 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (a) 25 mm nominal bore |
| 42 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Astral or equivalent make, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 43 | Providing and fixing UPVC (Schedule 80) brass threaded FTA/MTA of size 20mm nominal dia. |
| 44 | Providing and fixing UPVC (Schedule 80) brass threaded FTA/MTA of size 25mm nominal dia. Please Enable Macros to View BoQ information |
| 45 | Providing and fixing UPVC (Schedule 80) brass threaded FTA/MTA of size 25mm nominal dia. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender