Tender For Renovation Of Guest House At Civil Airport Jammu
Tender Value
23.48 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
3 days left
EMD
46960
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Guest House At Civil Airport Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix). |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars within 50m lead and including loading, transporting, unloading of unserviceable material to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads. |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material within 50m lead and including loading, transporting, unloading of unserviceable material to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads.In cement mortar |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material within 50m lead and including loading, transporting, unloading of unserviceable material to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads. For thickness of tiles 10 mm to 25 mm |
| 6 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 11 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) onexisting cement paint surface |
| 12 | Providing and laying Vitrified designer wall tiles in any design or colour different sizes {thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. all complete as per the approval and directions of Engineer-in-charge. |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 14 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Mat/Antiskid finish of size Size of Tile 600 x 600 mm |
| 16 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 82251987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to laid in true horizontal level suspended on inter-locking metal T.Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 30m) mm, cross - T of size 15x32 mm of length 1 mm and secondary intermediate cross-T of size 15x32 mm of length 6W mm to form grid module of size x 6m) mm, suspended from ceiling using galvanised mild steel items (galvanizing @ grams per sqm) i.e. mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto IOW mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron wall angle of size 24x24x0_40 mm of length 3000 mm to fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows(Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazedshutters 25 mm to 40 mm thick.Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). |
| 19 | Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 20 | Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: 35 mm thick shutters |
| 21 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10 mm |
| 22 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10 mm |
| 23 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality withnecessary screws etc. complete. |
| 24 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete |
| 25 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer {having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 26 | Providing and fixing bright finished brass handles with screws etc. complete:125 mm |
| 27 | Providing and fixing bright finished brass handles with screws etc. complete:100 mm |
| 28 | Providing and fixing ISi marked stainless steel sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 250x16 mm |
| 29 | Providing and fixing one piece construction white vitreous china squatting plate make Jaguar model no- (CNS-WHT-853P180SPPSM)/Hindware madel no-(Prima WD S-220) or equivalent with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :Single squatting plate with P.V.C. automatic flushing cistern. This item includes dismantling of old/existing WC and Cistern/ Flush Tank complete as per direction and satisfaction of Engineer-in-charge. |
| 30 | Providing and fixing Wall Hung Basin With Full Pedestal of make jaguar model no-(FNS-WHT-40801)/ Hindware model no (1009910SW/1103210SW) with C.I. brackets, 15 mm dia CP Brass Single Lever Extended Basin Mixer of make jaguar with model no-(FUS-CHR-29023B)/Hindware model no-(HNE_F360011CP_CHE) of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. This item includes dismantling of old/existing washbasin and complete fixing as per direction and satisfaction of Engineer-in-charge. |
| 31 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 32 | Providing and fixing Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) of make jaguar with model no-(FUS-CHR-29281)/ Hindware model no- (F780022CP) quality & make as approved by Engineer in charge.(a) 15 mm nominal dia. (Item also includes dismantling of old/existing telephonic wall mixer). |
| 33 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia. |
| 34 | Providing and fixing Jaquar Brass Toilet Roll Holder with Flap (Chrome) ACN-CHR-1153S/ Hindware model no.(F880003CP) or equivalent of approved quality as per the direction and complete satisfaction of Engineer-in-charge. |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 20 mm nominal dia Pipes |
| 37 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately. |
| 38 | Providing, installing and fixing in position Aluminium Composite Panel sheet with thickness 4 mm over any kind of structural frame work of aluminium or steel, for linear as well as curvilinear portions of the building , for all heights and all levels etc. including cost of installation, screwing, sealant, scaffolding, loading, unloading, and etc. All as per direction of Engineer-in-charge. (Note:- cost of Aluminium will be paid separately) |
| 39 | Providing & fixing bevelled tegular mineral fibre false ceiling tiles of size 595x595 mm of approved texture, design and patterns at all heights on existing frame of false ceiling tile having humidity resistance RH- 90% (exposure), Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) and NRC miniumum 0.50.This item includes removing the existing tiles, placement of new tiles,tightening of hanging clips and alignment correction of existing frame if required.The work shall be carried out as per specifications and as per directions of the Engineer-in-Charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile |
| 40 | Providing and Fixing 12 mm thick Wall Panneling louvers having 200 to 300 mm wide strips in available lenghts of approved make, design , colour and shade over the designated locations inclusive of edge beding complete with all necessary fixing arrangements as per manufacturer specification as per direction and satisfaction of Engineer in-charge. |
| 41 | Providing and fixing 8 mm thick bevelled edge mirror of superior glass (of approved quality) fixed with minimum 4 no's of stainless steel spacers and washers complete, without any frame or backup board as per direction and satisfaction of EIC. This item includes removal/ dismantling of old/existing bevelled edge mirror. |
| 42 | Providing and fixing 100 mm Stainless Steel angular square grating for floor trap of HINDWARE make Model F860058CP/Johnson make model no T2981S or equivalent of approved quality as per the direction and complete satisfaction of Engineer-in-charge. |
| 43 | Providing and fixing of Health faucet IMP (ABS) with 1.2 m SS of HINDWARE make Model F160023CP/CERA make model F8030110AB or equivalent, of approved quality as per the direction and complete satisfaction of Engineer-in-charge. This item also includes all necessary fittings , accessories and dismantling of old/existing Health faucet . |
| 44 | Providing and fixing of Liquid Soap Dispenser of Euronics make ES80A SS automatic wall mount with capacity 700 ml / Jaquar automatic soap dispenser Model SDR-BLC-DJ0160ASN of capacity 800 ml with chrome finish or equivalent with all necessary fittings and fixtures required as per direction and satisfaction of Engineer-in-charge. |
| 45 | Providing and fixing chrome finish bib cock of CERA make F2014151/Hindware (Cat no. F570004) or equivalent : 15 mm nominal bore. Item also includes dismantling of old/existing bib cock. |
| 46 | Providing and fixing chrome finish angular cock with wall flange of CERA make cat no F1020201/Hindware (Cat no. F360006CP) or equivalent: 15 mm nominal bore. Item also includes dismantling of old/existing angular cock. |
| 47 | Providing and fixing stainless steel ( Grade 304) single towel rail having 600 mm long of Jaguar make model no. (ACN-CHR-11111 SM)/Hindware (F102012CP) or equivalent and fitting the same with necessary stainless steel nuts and bolts complete with suitable arrangement as per approval of Engineer-in-charge. |
| 48 | Providing and fixing chrome finish Hindware Ultra Thin Overhead Rain Shower for Bathroom | Made of SS | 200mm Square Design of make hindware with model no-BLACP50626/Cera model no- F7020110SS or equivalent of approved quality as per the direction and complete satisfaction of Engineer-in-charge. |
| 49 | Providing and fixing stainless steel vertical storage with Hindware Italian Collection Multipurpose 3 Layers Shelf with wall mounted of make hindware with model no-F680014 or equivalent and fitting the same with necessary stainless steel nuts and bolts complete with suitable arrangement as per approval of Engineer-in-charge. |
| 50 | Providing and fixing stainless steel soap dish of make cera with Cat No. : F5007106/hindware model no-F580004CP or equivalent and fitting the same with necessary stainless steel nuts and bolts complete with suitable arrangement as per approval of Engineer-in-charge. |
| 51 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1. 70 mm for Series R 1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m). |
| 52 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. |
| 53 | Dismantling cement asbestos or other hard board ceiling or partition walls or PVC/other wall panelling including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 54 | Supply of 20 Watt LED of length 4ft Surface type fitting extruded aluminium luminaire including driver ,heat sink , diffuser suitable to operate on 230 volt 50Hz Ac supply luminous efficacy > 100lm/Watt,Min 50000 burning Hours CCT Min 5700K with all standard accessories for proper installation etc warranty 5 years on complete luminaire i/c driver/control gear/LED complete as required as per technical specification. |
| 55 | Supply of 36 W LED (600 mm x 600mm) fitting CRCA luminaire, high quality diffuser fix in front frame suitable to operate on 230 volt 50Hz supply IP raing IP20 recess mountable , luminous efficacy > 100 lm/ Watt, Min 50000 Burning Hours, CCT 5700K with driver and mounting accessory and lockable holders, warranty 5 years on complete luminaire i/c driver/control gear/LED all accessories coplete as required at civil Airport Jammu as per technical specification and as per preferred Approved make list of AAI. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender