Tender For Renovation Of Damaged Roof, Floors, Walls, Doors, Windows, Toilet, Septic Tank, Bore Well, Water Supply, Sanitary And Patient Waiting Shed Arrangements For Health Sub Centre Building At Vedanthagal In Chengalpattu District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Oct 2026
13 days left
EMD
9400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanchipuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Damaged Roof, Floors, Walls, Doors, Windows, Toilet, Septic Tank, Bore Well, Water Supply, Sanitary And Patient Waiting Shed Arrangements For Health Sub Centre Building At Vedanthagal In Chengalpattu District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking materials useful for Pressed tiles & Weathering course etc., complete and as directed by the departmental officers. |
| 2 | Clean removal of Cement plaster from walls etc., complete and as directed by the departmental officers. |
| 3 | Supplying and fixing Stainless Steel (Salem Stainless Steel) Door Frame - Box Section using Stainless Steel Plate with following thickness with the size of 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc including dismantling, making necessary chipping and holes in RCC columns, walls with power drills to the extent required ,including providing concrete 1:2:4 inside the box curing etc complete complying with standard specification and as directed by the departmental officers - SS Door Frame with thickness of 1mm/1.60mm. |
| 4 | Renewing and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm White glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof, Floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The Water Closet should be got approved from the Executive Engineer before use on works). |
| 5 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should Not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting Noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The Window should be got approved from the Executive Engineer before use on work. |
| 6 | Laying of screed concrete using Cement Concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four Hard Broken Stone Jelly) using 10-12mm ISS metal jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means. |
| 7 | Finishing the top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick approved quality and colour laid in Cement mortar bed in 1:3 (One Cement and Three Crushed Stone Sand) 12mm thick and pointed with water resistant tile epoxy grout for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved from the Executive Engineer before use on works) |
| 8 | Renewing the damaged Leach pit by reconstruction of new leach pit with necessary earth work excavation, well rings 10 numbers of 90cm dia and RCC covering slab 50mm thick including cost of all materials, labour charges etc., complete and as directed by the departmental officers. |
| 9 | Flooring with plain ceramic tiles of size size 305 x 305 x 6mm and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved from Executive Engineer before use on works) |
| 10 | Ceiling Spalling Rectification: Making the RCC ceiling neat smooth by chipping and removing loose plastering and concrete. Cleaning the rust on rods apply anticorrosive coating Tec Beat ZR.b. fixing welded mesh on ceiling for additional reinforcements. Apply one bond coat TEC BOND SBR on entire surface. Cement plastering the damaged surface admixed with TEC MIX 100. Water profing compound. Plastering thickness is not more than 20mm. If it is over 20. Plastering with 2nd layer. After completed the plastering apply curing compound for water less curing including scaffolding. The cost include cost of material and labour cost for chippling and cleading anti corrosive coating, welded mesh fxing, bond coating, plastering and curing coating etc., Complete. |
| 11 | Replastering with Cement Mortar 1:5 (One Cement and Five Plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 12 | Supplying and fixing of MS grill of approved desgin for grill gate grill works to doors and windows opening ramp etc using necessary mild steel for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete and as directed by the departmental officers. |
| 13 | Supplying and Fixing of Wood Polymer Composite (WPC) door with solid door frames extruded with size 75mm X 50mm. The Inner core made of rigid WPC compound with minimum shore hardness of 55 and Bold Density 750Kg/cub.Mt. The frame shall be fixed to the wall using 10 X 10mm long MS screw through the frame by using PVC fasteners. A minimum of 4nos screw to be provided for each vertical members, Door shutter of 25mm thick Wood Polymer Composite (WPC) single core Extruded Door Shutter, with one side digital printing of Specified Design which is approved by engineer-in-Charge. Both side of the shutter shall have rough sugar texture finish, laminated with UV oil. The solid WPC board shall have minimum shore hardness of 55 and Bulk density 550Kg/Cub.Mt moulding the thickness remains 25mm(+/-1mm) etc complete as per the direction of the departmental officers. |
| 14 | Construction of Inspection chambers of following including earth work excavation, CC 1:5:10 of 10cm thick and brick work in Cement Mortar 1:5 (One Cement and Five M-sand) using best quality of second class table moulded bricks of size 9\\" x 4⅜\\" x 2¾\\"and plastering with Cement Mortar 1:3 (One cement and Three M-sand) 12mm thick to inner and outer sides and wearing coat 1:3:6 (One cement, Three M-sand and Six aggregate) 15cm thick and covered with precast slab of 5cm thick etc., complete complying with standard specification and as directed by the departmental officers as per standard specification.0.60 x 0.60 cm of size |
| 15 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level.110mm dia PVC Soil Pipe |
| 16 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 meter pipe length, etc., complete complying with standard specification.110mm dia PVC pipe |
| 17 | Renewing and fixing in position best quality and approved make Indian made White glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved from the Executive Engineer before use on works). |
| 18 | Supplying and fixing Solid Core flush shutter of following type with thickness with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 6 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm), 3 Nos. 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers.Double leaf. |
| 19 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Interior (Emulsion) Paint of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved from the Executive Engineer before use on works.) |
| 20 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Exterior (Emulsion) Paint of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved from the Executive Engineer before use on works.) |
| 21 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved from the Executive Engineer before use on works.) |
| 22 | Drilling of bore well in sedimentary or Alluival Soil strated by first taking a pilot bore of 150mm (6\\") dia and then enlarged to the required dia by direct or Rotar mud circulation method using contractor power rotory (VI z) Tools labour for drilling and water transportations of machince from one place to another place of half to drilling site and point ot point in various palces as directed by the engineer in charge. Upto 55m Depth ending below Ground level. |
| 23 | Reaming from 140/150mm pilot bore to 300mm dia bore as directed by the TWAD size bore as directed by the TWAD Board officers upto 60m Depth ending from ground level.Upto 51m Depth ending below Ground level. |
| 24 | Supplying and delivery of unplasticised palin PVC casing pipe of the following diameter in 3m lenght with screened, socket ends and lengthing guides for every 15m length of pipes as per IS 7818/1992 and assended from time to time to suit bore well upto 80m depth (CS) for delivery at site of work with ISI making including loading unloading and transportation Charges etc complete. |
| 25 | 150mm PVC Plain casing ribbed screen Pipe |
| 26 | 150mm PVC Plain casing Pipe |
| 27 | Labour charges for inserting the PVC casing pipes assembly (With slots or without slots) in the drilled holes including jointing the pipes with PVC couplers with cement paste etc., complete. Supplying and packing the annular spaces with pebbles of size & quality etc complete as directed by the departmental officers. (150mm dia PVC plain casing ribbed screen pipe) |
| 28 | Charges for developing the bore well with air compressor of capacity 300cfm / 150 PSI for a minimum 8 hours until clear water is obtained including transportation charges for air compressor and as directed by the Engineer in charges and conduting yeild test with bore well by ari ligting pump measured by V Notch method using 300cfm/150 PSI air compressor as approved by the Engineer in charge. |
| 29 | Supplying and fixing 1.00 HP / 3 Phase Sub mersible pump of approved make and quality with ISI mark, necessary accessories and fixed with delivery pipe errected in the borewell with necessary clamp etc., with following additional accessories. 1 No of 3 phase star delta starter 63 AMPS of approved quality and make with ISI mark, 1No of 3 phase 63 AMPS main switch of approved quality and make with ISI mark, 1 No of priventor of approved quality and make with ISI mark, 1 No of panel board of required size with indicator fuse unit voltmeter with necessary provisions to accomodate the starter and mini starter etc. 1 No of capacitor with board as per standards of TNEB. |
| 30 | Supplying and fixing of 40mm HDPE pipe for sub-mergible pump in Bore well (clalss-5 1 Mpa or 10 Kg / cm2 pressure) of best approved quality including welding wherever necessary etc., complete as directed by the Executive Enigneer. The pipe should be got approved From the Executive Engineer before use on works. |
| 31 | Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 meter height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. External Water Supply Arrangements -Above Ground Level |
| 32 | 25mm dia UPVC Pipe |
| 33 | 20mm dia UPVC Pipe |
| 34 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved from the Executive Engineer before use on works. 25mm Dia. |
| 35 | Supplying fixing and connecting of 2.50 Sq.mm sheathed 3 core flat type copper cable for the sub-mergible motor from panel board to sub-mergible pump etc., complete complying with standard specification and as directed by the departmental officers. |
| 36 | Supplying and laying of 15mm dia Nylon rope for erection of submersible motor in borewell of approved quality etc., complete and as directed by departmental officers. |
| 37 | Supplying and fixing the PVC end cap of 160mm dia at the end of PVC casing pipe etc., complete complying with standard specification. The bore cap should be got approved from the Executive Engineer before use on works. |
| 38 | Supplying, fixing of cylindrical vertical notational polythene water storage tank of 500 litres capacity confirming to I S. 12701 / 96. the tank is meant for outer (or) indoor, use complete with removable hinged top locking arrangements and to make provision to fix with simply pipe lines necessary manhole with cover and including all PVC specials, plugs, screws, nails to fix the tank etc., and the tank should be fixed firmly as directed. The rate shall inclusive of all materials labour, conveyance, hoistings and fixing charges etc., (The water tank should be got approved by the Executive Engineer before use on works by the departmental officers. |
| 39 | SUB TOTAL |
| 40 | GST @ 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender