Tender For Providing 1 No. 6 Bodies Cold Storage Unit To New Mortuary Block In Government Hospital At Srivaikundam In Thoothukudi District.
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
11 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing 1 No. 6 Bodies Cold Storage Unit To New Mortuary Block In Government Hospital At Srivaikundam In Thoothukudi District.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Erection, Testing, Commissioning and Handing over of 6 Body's each Mortuary cabinet type as detailed below.A) Supply, Fabrication and erection of One number PUF insulated cabinet type mortuary like Blue star Model No. BMC 610 to hold 2 bodies in 3-tier arrangement as per the following specifications and provisions.1) External cabinet dimension of 3168mm (W)X 2404 mm (D) x 1785mm (H) suitable for bodies cabinet with panel thickness not less than 60mm.2) Insulation with 80mm thick PUF panels with 35 to 40 Kg / cu.mt.3) Panel finish 0.55mm thick stainless steel in the front side outer and other outer and inner areas with 0.55mm thick pre-painted galvanized steel.4) Individual doors for each body with chrome plated hinges and locks. |
| 2 | 5) All panels to be joined together by means of tongue and groove and locked together by means of poise cam locks on each side to ensure air tightness. Foamed in PVC bubble gasket in all panels.6) 'L' shaped corner panel in a single piece in all four corners.7) Edges of the doors and door openings to be finished with PVC lining. 8) Electronic Temperature, Indicator cum controller, vapour proof, incandescent light fixture with lamp with plastic coated globe.9) Pilot light to alert the personnel on the outside of the cabinet.10) Toggle switches to operate the vapour proof light and pilot light mounted on the outside of cabinet with stainless steel cover plate protection. |
| 3 | B) Supply fabrication and erection of one number split mounted type roof top mounted refrigeration system to maintain +2° C to +6°C inside the 6 body mortuary cabinet with the following specifications of capacitynot less than 10000 BTU / Hr. Constructed of GI panels with suitable compressor of make Kirloskar Cap land with condenser with condenser coil, evaporator with evaporator fan motor with suction discharge and liquid refrigerant piping and expansion device etc. complete like Blue star model No. RTU -10. Operating on with power supply at 230V +/- 10 % /single phase / 50Hz AC supply.C) Supply, fabrication and erection of 6Nos. of MS powder coated telescopic structure sliding in the fixed channel within the cabinet each to hold the weight when it is stretched fully out. |
| 4 | D) Supply, fabrication and fixing of 6Nos. of stainless steel trays with rollers and bush bearing to keep body on the telescopic structure inside the cabinet.E) Providing 2\\" thick raised concrete platform of suitable size to keep the 6 body mortuary cabinets.F) Providing drainage piping from the evaporator and cabinet to lead drain water just outside the cabinet room.G) Including packing and forwarding charges. |
| 5 | Supply and fixing of 5 KVA Electronic Automatic Voltage double booster Stabilizer with Input Voltage range of 170Volt – 270 Volt and Output Voltage range 200Volts to 240 Volts with High and Low Voltage cut off and time delay relay. |
| 6 | Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection. (For AC Plug) |
| 7 | Supply and fixing of 32A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only. |
| 8 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour. (For AC plug from DB) |
| 9 | Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End. |
| 10 | Supply and fixing of 32A Double pole MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection.[The MCB and metal enclosure should be of Higher End]. |
| 11 | Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.(Cold Storage unit-1,HZDB-1) |
| 12 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. |
| 13 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender