Tender For Annual Maintenance ,Repair ,Service, Coil Rewainding,Erection ,Reerection Of Submersible Pumpsets In Existing Borewells For One Year At Ward No 1 To 27 In Mangadu Municipality
Tender Value
15 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
7 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanchipuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance ,Repair ,Service, Coil Rewainding,Erection ,Reerection Of Submersible Pumpsets In Existing Borewells For One Year At Ward No 1 To 27 In Mangadu Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Supply and renewal PVC insulated and sheathed 3 Core Flat type copper cable confirming to IS 694/1990 including cost and conveyance of materials and labour charges for fixing and testing etc., complete |
| 2 | 1.50 sq.mm 3 core flat type copper cable |
| 3 | 2.50 sq.mm 3 core flat type copper cable |
| 4 | 4.00 sq.mm 3 core flat type copper cable |
| 5 | 6.00 sq.mm 3 core flat type copper cable |
| 6 | Supply and renewal L.T Cables 3,4 Core 1.1 KV Grade armoured aluminum conducor cable confirming to IS 1554 PART I with ISI Marking including cost and conveyance of materials and labour charges for fixing and testing etc., complete |
| 7 | 4.00 sq.mm 3 core |
| 8 | Repair of Single Phase Submersible Pumpset including cost of materials and labour charges |
| 9 | UP to 2 HP coil rewainding |
| 10 | UP to 3 HP coil rewainding |
| 11 | Motor coupling |
| 12 | Motor Top bearing houshing |
| 13 | Motor Top bearing bush |
| 14 | Motor Top bearing Sleeve |
| 15 | Motor bottom bearing housing |
| 16 | Motor bottom bearing Sleeve |
| 17 | Carbon segment |
| 18 | Trust bearing Top |
| 19 | Trust bearing bottom |
| 20 | Pump Top bearing bush |
| 21 | Pump Top bearing Sleeve |
| 22 | Impeller 1Hp to 3Hp |
| 23 | Pump Bowl 1Hp to 3Hp |
| 24 | Distance Bush |
| 25 | Diffuser Housing |
| 26 | Impeller Bush G.M |
| 27 | Motor Upper bearing |
| 28 | Motor Lower bearing |
| 29 | Painting charges for the pumpset |
| 30 | Transporting charges for the pumpset |
| 31 | Removal Charges for submersible pumpset |
| 32 | Re-Erection Charges for submersible pumpset |
| 33 | Repair of 3-phase submersible pumpset including cost of materials and labour charges |
| 34 | Above 4 HP upto 6 HP coil rewainding |
| 35 | Above 7 HP upto 7.5 HP coil rewainding |
| 36 | Above 7.5 HP upto 12 HPcoil rewainding |
| 37 | Motor copupling |
| 38 | Motor Top bearing houshing |
| 39 | Motor Top bearing bush |
| 40 | Motor Top bearing Sleeve |
| 41 | Motor bottom bearing housing |
| 42 | Motor bottom bearing Sleeve |
| 43 | Carbon segment |
| 44 | Trust bearing Top |
| 45 | Trust bearing bottom |
| 46 | Discharges casing |
| 47 | Pump Top bearing bush |
| 48 | Pump Top bearing Sleeve |
| 49 | Impeller 2Hp to 2oHp |
| 50 | Pump Bowl 2Hp to 2oHp |
| 51 | Distance Bush |
| 52 | Diffuser Housing |
| 53 | Impeller Bush G.M |
| 54 | Motor Upper bearing |
| 55 | Motor Lower bearing |
| 56 | Painting charges for the pumpset |
| 57 | Transporting charges for the pumpset |
| 58 | Removal Charges for submersible pumpset |
| 59 | Re-Erection Charges for submersible pumpset |
| 60 | Panel Board repair: including cost of materials and labour charges |
| 61 | 1 No - Volt Coil |
| 62 | Ammerer Selector switch |
| 63 | Contract Point Set Kit |
| 64 | Over load relay unitset |
| 65 | 30A Fuse carrier set |
| 66 | Supply and delivery of following PVC, GI Pipes and Specials including cost and conveyance of pipes with accessories to site etc., complete |
| 67 | 50 mm upvc pipes |
| 68 | Supply delivery and Fixing of Nylon Rope for bor well Including Cost and conveyance of material and labour charges for Laying and Jointing of pipes, Testing and labour charges etc., |
| 69 | Rate for flushing fo borewell of 6\\" dia requiring less than 4 hours operation using drill rods/hose with required sizof pipes for vrious capacity compressor including transportation, labour, and fuel charges for compressors as directed by the departmental officer etc. complete. |
| 70 | 600 Cfm (100/150 PSI) |
| 71 | Supply and renewal of G.M. Gate valves including cost and conveyance of materials and labour charges for fixing and testing etc., complete |
| 72 | 50mm GM Gate Valves |
| 73 | 80mm GM Gate Valves |
| 74 | Supply and renewal of G.M. Non Return valves including cost and conveyance of materials and labour charges for fixing and testing etc., complete |
| 75 | 50mm GM Non Return Valves |
| 76 | 80mm GM Non Return Valves Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender