Tender For special Repair Of Roof Leakage/Cracks, Wall Seepage And Reqd Electrical Wiring In Bldg No T-06A (Single Offr Living) Of 281 Med Regt Under Ge (West) Pathankot
Tender Value
12.75 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
3 days left
EMD
25500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Roof Leakage/Cracks, Wall Seepage And Reqd Electrical Wiring In Bldg No T-06A (Single Offr Living) Of 281 Med Regt Under Ge (West) Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part-I B/R PortionM&L liquid water proofing treatment to RCC roof slab including dismantling of existing roof treatment of any description such as worn-out tar felt, debris, mortar of any description & any thickness, surface cleaning of all foreign material such as shrubs/roots, fungus, moss, dust including plaster, APP membrane etc. including disposal of debris out of MoD land : (a) Prepare the surface by cleaning the surface and making free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated, thereafter, inspection for cracks on the surface caused by thermal expansion, contraction. Cutting the grooves with suitable cutter machine in \\"V\\" groove filled with Repair mortar/micro concrete/General purpose grout as recommended proportionally as per recommendation of manufacturer. Making of Gollas at all the corners with Polymer modified mortar (1:4 Cement: sand with acrylic polymer 3.5% by weight of cement) complete all as specified.(b) Laying 10mm thick rendering in Cement mortar 1:3 with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of concrete roof surfaces, finished even and fair to receive treatment on roof Complete (c) Supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane with following specifications: (i) Elongation of range 400% to 600%, (ii) Tensile strength of 8-12 N/mm2, (iii) Crack bridging ability of 3.00-4.00mm, (iv) Hardness (Shore 'A' ASTM D2240) of range 50-70. The application shall include epoxy primer application in ratio 1:1 (resin: hardener) with 100% water dilution and laying of fiber mesh 1.5 mm thick wave in leno pattern laying weight 4.5gm/Sqm and painting it properly with overlap of 50 mm, and allowing it to dry before application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer. |
| 2 | Note:- (i) The defect liability period of water proofing treatment to RCC roof slab including sunken floor shall be 10 years and the contractor shall be responsible to keep the entire building(s) free From leakage/seepage for a period of 10 years after certified date of completion. The contractor may obtain a similar guarantee from the specialist firm engaged by him for the purpose (ii) Work to be carried out by authorized applicator and as per manufacturer’s instructions.(iii) Providing test with filling of water for continuous 48 hours if there is any leakage than entire treatment will be done again by contractor without any cost.(iv) The rate includes for filling cracks in existing roof with epoxy cement mortar using suitable bonding agent before laying cement plaster.(v) Material shall be purchased directly from the Company’s Authorised Dealer only. No material procured from any other source or prior to the issue of the Work Order shall be permitted for use.All the purchase vouchers for the quantities incorporated in the contract should be verified and defaced by Engineer-in-Charge and same should be kept in record. The purchase vouchers of all the materials for entire quantity should be recorded in Measurement book as ‘not to be abstracted’.(vi) The contractor will be procured 50% of quantities immediately after placing of WO. The remaining 50% quantities will be procured in one week advance before consumption/competition of earlier quantities (first 50% material). All the material shall be kept in custody of the contractor and in double lock & Key system. The one key shall be with the Engineer-in-Charge and other shall be with the contractor’s representative.(vii) Stored material will be issued by the contractor to applicator in consultancy with Engineer-in-Charge on daily basis.(viii) The contractor shall submit a valid Memorandum of Understanding (MoU) executed with any one of the approved brands(ix) Warranty: One year for defects due to workmanship.” |
| 3 | Dismantling plain or corrugated steel sheeting, AC Sheets any guage, thickness including Nainital or similar pattern roof covering/wall cladding complete all as specified and directed.Note : height of the bldg truss is upto 7 Metre |
| 4 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheets 0.50mm TCT any colour having tensile strength 0f 550 Mpa as in roof covering/wall cladding to walls, fixed with self tapping screws as specified and directed.Note : ht of the bldg is upto 7 Metre |
| 5 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) or directed by Engr-in-Charge fixed with self tapping screws as specified. |
| 6 | Dismantling of steel work of any description and in any position not otherwise specifically provided for. |
| 7 | S&F Steel work in tubular trusses including special shaped washers etc, complete using ERW or induction butt welding tubes confirming to Fe-410W (gde E-250) quality including dismantling. |
| 8 | M&L for preparation of steel surfaces or iron based material of any description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide complete all as directed. |
| 9 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of Synthetic enemal paint, complete all as specified and directed by Engr-in-Charge. |
| 10 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets. |
| 11 | Anodised aluminium snap grid of 605 X 605mm frame work for false ceiling including hangers 3 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and xpansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 12 | M&L for 6 to 7 mm thick gypsum board panels 600 x600 mm with PVC laminated on one side and aluminium foil on another side suitably placed in false ceiling grid made of aluminium Gi/MS all as specified and as directed.Note : Aluminium grid will be measured and paid separately. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing srviceable tiles to store and rubbish off the premises complete all as specified. |
| 14 | M&L Anti-skid / Non skid ceramic coloured tiles 7 to 8Non - (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete |
| 15 | M&L Virified Ceramic tiles Dark Shade/Double charged/ ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ® comaplete all as specified. |
| 16 | M&L glazed ceramic coloured tiles 300x200/450x 300x 6 to 7mm thick on vertical surfaces such as dados, wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces. |
| 17 | M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes. |
| 18 | M&L Rendering 10 mm thick in CM (1:4) finished rought to receive wall tiles. |
| 19 | M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and rounding edges, over 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes complete all as directed and polishing complete. |
| 20 | Demolition of brick work or stone masonry built in cement mortar including pillar etc. complete all as specified |
| 21 | M&L for brickwork with fly ash modular bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified |
| 22 | Taking down plastering in cement mortar on brick or stone wall/ ceilings etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified. |
| 23 | M&L for rendering 10mm thick cement plaster 1:6, incl finishing even and smooth without using with out extra cement on internal faces. |
| 24 | M&L for rendering 15mm thick in two coat 10 mm thick in cement plaster 1:6 and 5mm thick in cement plaster 1:4 mixed with integral water proofing compound as per manufacturer instruction,on fair faces of brick work or concrete surfaces finish even and smooth without using extra cement all as specified and as directed ( water proofing compound taken separately) |
| 25 | M&L for applying two coats of OBD over two coat of wall care putty over a coat of alkali resistant primer including preparing the new plastered wall surfaces complete all as directed. |
| 26 | M&L for preparation of old surfaces by complete removal of existing treatment of painted walls incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification all as specified and as directed. |
| 27 | M&L for preparation of old surface of ceilings and applying one coat of white wash complete all as specified and directed. |
| 28 | Material and Labour for new exterior painting work and making good/smooth the surface with wall putty with silicon additives and sanding thes surface for removal of loose particles and applying one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties (Apex Ultima Suprema). complete all as sepcified and directed.Note: All treatment shall be doneby authorised OEM with the help of mechanical means. |
| 29 | Material and Labour for exterior painting work including complete removal of existing treatment and rubbish material till top surface of existing plaster and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additives and sanding thes surface for removal of loose particles and applying one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties (Apex Ultima Suprema). complete all as sepcified and directed.Note: All treatment shall be doneby authorised OEM with the help of mechanical means. |
| 30 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified |
| 31 | M&L for PCC (1:3:6) type C2 using 40 mm graded aggregate as in plinth protection/ Paths of 75mm thick. Finishing cement concrete surface even and smooth without using extra cement complete all as specified |
| 32 | M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping including formed work complete all as specifed and directed. |
| 33 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified |
| 34 | S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc of size 105 x 60 mm complete all as specified |
| 35 | S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc of size 125 x 60 mm complete all as specified |
| 36 | M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in filling in frame complete all as specifed and directed. |
| 37 | M&L for 35mm thick flush shutter,solid core construction with block board core and plywood face panels,commercials type on both sides complete all as specified and directeb by Engineer in Charge |
| 38 | S&F for glazed and skeleton shutters 35 mm thick 2nd class hard wood open rebated and prepared to receive gauze etc (without sash bars)edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, gauze etc , sizes of memebres of shutters as specified in SSR Part-I section 8 clause 8.20 (a)( wire mesh doors) Supply and fitted to chowkats complete all as specified |
| 39 | S&F 150mm size aluminium anodised handles, fabricated type complete all as specified. |
| 40 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified |
| 41 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified |
| 42 | S&F 140mm ling floor door stopper of aluminum alloy body and tongue anodised with hard drawn steel spring fixed in floor or bottom of door complete all as specified |
| 43 | S&F of steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. glazed and gauged shutter. Glazed shutter made out of hollow section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, atrred hold fasts, PCC bed blocks for fixing hold fast, including plain/ figured glass and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples etc complete all as per drg No CEPZ/ TD-245/01 Sheet No 1/1 & CEPZ/ TD-246/01 sheet No 1/2 & 2/2 including taking down old windows/ventilators, complete all as specified and directed. |
| 44 | S&F Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel wire staples along with frame work of windows / ventilators with all necessary arrangements complete all as specified and as directed. |
| 45 | S&F MS helical door spring 300 mm long with roller and roller plate complete all as specified. |
| 46 | S&F CP curtain rail / drapery rod 20 mm dia of approved pattern along with decorative SS brackets of approved quality with knob and pattern fixed with screws all as specified and as directed. |
| 47 | S&F in repairs of single Piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings Size: 360x725 x735 mm, S Trap-300 mm white with combined flush tank (Cascade type) incl seat covers complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F in repairs, vitreous china wash basin white flat back size 550x400mm with brackets including cutting for and pinning in ends of brackets or erecting stand including waste coupling CP brass 32mm dia with long screwed shankS&Fly nutS&Fancy type CP pillar tap complete all as specified |
| 49 | S&F in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 06mm thick commercial ply wood backing including aluminium frame and fixed in wall with wooden plug with chromium plated brass screws and cup washers with glass self assembly complete all as specified and as directed by Engineer-in-Charge. |
| 50 | S&F in repairs soap dish, vitreous china white, approximate size 160 x 160 x 90mm, fixed to plugs with chromium plated brass screws all as specified and as directed. |
| 51 | S&F CP brass tubular towel rail 600mm long 20mm dia 'D' type in repairs complete all as specified |
| 52 | S&F in repairs for low density polythelyne pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB etc. 32mm bore complete all as specified |
| 53 | Taking up or down steel tubing & connections, 15 mm dia complete all as specified |
| 54 | Taking up or down steel tubing & connections, 20 mm dia complete all asspecified |
| 55 | S&F 15mm dia. Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and directed. |
| 56 | S&F 20mm dia. Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe |
| 57 | Cutting chases ,pinning in making good to facing where required of brick walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting not exc 10 cm girth. |
| 58 | S&F in repairs 15mm bib taps fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule and fixed |
| 59 | S&F in repairs, CP 15mm, stop valves/ angle cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified |
| 60 | All as per srl item No 58 here-in-before but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified |
| 61 | S&F 15 mm dia 600 mm long PVC water connection with PTMT nuts and washers all as specified |
| 62 | S&F in repairs CP shower rose 125 mm size with swivel joint fixed in repairs complete all as specified |
| 63 | Dismantling of 1000 ltr water storage tanks and removed to store complete all as specified. |
| 64 | S&F 1000 ltr capacity of Rotational moulded PVC water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 65 | S&F Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe and fixed in repair complete all as specified |
| 66 | S&F 20 mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 210gms) complete all as specified |
| 67 | Taking up or down PVC pipe 110/75 mm dia complete all as specified |
| 68 | S&F in repairs110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and laid in trenches and under floor etc incl taking down old pipes complete all as specified |
| 69 | S&F in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and laid in treanches and under floors etc incl taking down old pipes complete all as specified |
| 70 | S&F 110mm PVC (SWR) bends any radius complete all as specified |
| 71 | S&F 75 mm PVC (SWR) bends any radius complete all as specified |
| 72 | S&F 110mm PVC (SWR) bends any radius but with access doors complete all as specified |
| 73 | S&F 75 mm PVC (SWR) bends any radius but with access doors complete all as specified |
| 74 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent to waste pipe fixed in cement concrete type B-1 (1:2:4), 75 mm dia outlet complete all as specified |
| 75 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified |
| 76 | S&F 110 mm PVC (SWR) vent cowl complete all as specified |
| 77 | S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats (Minimum weight 300 gms) complete all as specified |
| 78 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150mm dia pipe complete all as specified and as directed. |
| 79 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) |
| 80 | M&L for 75 mm thick Cement concrete type D4, 1:4:8 (40mm graded aggregate)as in sub base. |
| 81 | M&L for 20 mm thick screed bed or bedding layer of mortar in cement 1:6 for laying floor finishes |
| 82 | M&L chequered cement concrete tiles 30cm x30 cm x25mm thick , set jointed and pointed in neat cement slurry with grey cement and pigments |
| 83 | S&F in repairs of 15mm bore brass chromium plated wall mixer with provn of overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges for mixing hot and cold water, screwed down, high pressure complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 84 | S&F in repairs of 15mm bore brass chromium plated wall mixer with provn of overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges for mixing hot and cold water, screwed down, high pressure complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender