Tender For Provn Of Trusses And Cover For Vehs At Af Stn, Provn Of Pre-Fabricated Covered Shed At Nbc Hall, Provn Of Cloth Drying Hanger For Certain Omqs And Smqs, Provn Of Fire Rittal Roof Ceiling At Af Stn Jaisalmer And Provn Of Bathroom (Qty-2) Fo
Tender Value
45.23 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
17 days left
EMD
90466
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Trusses And Cover For Vehs At Af Stn, Provn Of Pre-Fabricated Covered Shed At Nbc Hall, Provn Of Cloth Drying Hanger For Certain Omqs And Smqs, Provn Of Fire Rittal Roof Ceiling At Af Stn Jaisalmer And Provn Of Bathroom (Qty-2) For Guard Post And Provn Of Waiting Room At Chandan Under Ge (Af) Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Surface dressing n exc 15 cm deep complete all as specified and directed. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cum getting out, returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface. |
| 3 | Removing excavated material n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed. |
| 4 | M&L cement concrete in foundations, fillings and mass concrete 1:3:6 type B-2 using 40 mm graded stone aggregates complete all as specified and directed. |
| 5 | M & L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed. |
| 6 | S&F for Steel work in tubular trusses using hollow tubuliar/square/rectanguliar pipes including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 7 | M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 8 | S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall /Eaves, fixed with self tapping screws as specified and as per manufacturer specification complete all as specified and directed. |
| 9 | Surface excavation not exc 30 cm and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed. |
| 10 | Returning , filling in including in spreading ,leveling,watering and well raamming in layers.n exc 25 cm complete all as specified and directed. |
| 11 | M&L for 1:4:8 type D2 (40mm graded aggrage) cement concrete in foundation, filling and mass concrete complete all as specified and directed. |
| 12 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 13 | All as per item No 12 here in before but 6mm to 8mm dia complete all as specified and directed. |
| 14 | M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 15 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, flat and rough finished surfaces of concrete; vertical or to batter complete all as specified and directed. |
| 16 | M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-I (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:6 etc complete all as specified and directed. |
| 17 | M&L for PCC type B-0, 1:2:4 using 12.5 mm graded stone aggregates as in bands, bed blocks, fixing hold fasts, filling of door frames etc complete incl necessary formwork complete all as specified and directed. |
| 18 | M&L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed in cement mortar 1:3 complete all as specified and directed. |
| 19 | M&L for 10mm thick cement screed in cement mortar 1:3, including finishing even and smooth with out using extra cement to receive roof treatment, mixed with water proofing compound @3% by weight of cement over cleaned roof surface, as in grading to RCC roof surface,complete all as specified and directed.Note - Water proofing compound shall be measured and paid separately. |
| 20 | Supply only Liquid water proofing compound STP No-1 Dr. Fixit or complete all as specified and directed. |
| 21 | M&L for water proofing roof treatment, consists of a five layered Atactic polypropylene modified polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including Bituminious primer @ 0.3 ltr per Sqm confirming to IS 3384-1986 on roof surfaces piror laying APP and a coat of bituminous aluminium primer @ 100 gm/Sqm on top, including sealing all joints by thermo fusion, complete all as per manufacturer's instructions. |
| 22 | M & L PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in Roof padding, roof kerbs of mud stops or similar work maintain proper slope as requred complete all as specified and directed. |
| 23 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, flat and rough finished surfaces of concrete complete all as specified and directed. |
| 24 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, of square, rectangular or polygonal shape and rough finished surfaces of concrete complete all as specified and directed. |
| 25 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed. |
| 26 | M&L for reinforced cement concrete (design mix) M-25 (20mm graded aggregates) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 27 | M&L for reinforced cement concrete (design mix) M-25 (20mm graded aggregates) in slabs supported on walls, beams and columns in slabs, floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 28 | M&L coloured glazed ceramic tiles in dado/skirting 450x350x7mm/350x250x7/450x300x6-7mm thick over 10mm thick CM (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile complete all as specified and directed. |
| 29 | M&L coloured Non Skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floors etc over 15mm thick CM (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile complete all as specified and directed. |
| 30 | M&L for 10mm thick plaster in CM (1:4) on internal fair faces of brickwork or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 31 | M&L for 15mm thick external plaster in CM (1:4) on fair faces of brick, block work or concrete surfaces including roofs and with WPC where required, finished even and smooth (without using extra cement) complete all as specified and directed. |
| 32 | M&L for preparation of surfaces newly plastered wall surfaces and applying two coats of oil emulsion distemper of approved tint complete all as specified and directed. |
| 33 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of distempers oil emulsions complete all as specified and directed. |
| 34 | M&L for preparation of newly plastered external wall surfaces and applying two coats of cement paint of approved tint over alkali resistant primer complete all as specified and directed. |
| 35 | M&L Framed work as in doors chowkhat or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either complete all as specified and directed. |
| 36 | S&F 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) complete all as specified and directed. |
| 37 | M&L Two coat of synthetic enamel painting on new wooden surfaces exc 10cm width or girth over a one coat of pink primer incl preparation complete all as specified and directed. |
| 38 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and directed. |
| 39 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 40 | S&F anodised aluminium frame for doors, windows, ventillators, partions with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 41 | S&F 4.8mm thick sheet glass, ordinary quality n exc 0.5 sqm in each pane, fixed in doors/windows/Ventillators etc complete all as specified and directed. |
| 42 | S&F Aluminium anodised barrel tower bolt of extruded section 150mm size complete all as specified and directed. |
| 43 | S&F Aluminium alloy, anodised sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 44 | S&F 100mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 45 | S&F 125mm size anodised extruded aluminium alloy handle fabricated type complete all as specified and directed. |
| 46 | S&F 15mm bore cast copper alloy, with capstan heads, chromium plated pillar taps with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed down for iron pipes etc complete all as specified and directed. |
| 47 | S&F 15mm size cast copper alloy, chromium plated stop,angle valves screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes etc complete all as specified and directed. |
| 48 | S&F Vitreous china wash down water closet pan with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 49 | S & F wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe complete all as specified and directed. |
| 50 | S&F PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed. |
| 51 | S&F viterous chaina half stall urinal flat back white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waster pipe) including providing and fixing plugh bedding Urinal against wall in CM 1:2 securing Urinal to plug with and including 60 mm long brass screw pointing around urinal back in cement etc including urinal spreader as complete all as specified and directed. |
| 52 | S&F in repairs 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed. |
| 53 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 54 | S&F PVC connection 15mm size with brass CP nuts of length 600mm complete all as specified and directed. |
| 55 | S&F 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board coloured PVC frame and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed. |
| 56 | S&F LDPE waste pipes of 32mm bore pressure rating 6 Kgf/Sqcm for wash basin,urinal complete all as specified and directed. |
| 57 | S & F PVC (SWR) floor trap with out let 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed. |
| 58 | M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 59 | S&F liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. (Minimum weight 105gms) |
| 60 | S&F 500 ltrs capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 61 | S&F 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 62 | S&F PTMT grating doom, 100mm dia fixed complete all as specified and directed. |
| 63 | S&F PTMT grating doom with waste hole, 125mm dia fixed complete all as specified and directed. |
| 64 | S&F 15mm bore cast copper alloy, chromium plated bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as approved and directed. |
| 65 | M&L mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls and ceiling or laid to floors of the following sizes :-(a) 15mm bore |
| 66 | All as per Item No 65.00 here in before but 20 mm dia |
| 67 | S&F PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints fixed to walls with suitable fixtures complete all as specified and directed. |
| 68 | S&F PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 69 | S&F PVC (SWR) bends any radius for 75 mm dia pipe complete all as specified and directed. |
| 70 | S&F PVC (SWR) bends any radius for 110 mm dia pipe complete all as specified and directed. |
| 71 | S&F PVC (SWR) junction single, (Single T) equal or unequal for 75 mm dia pipe complete all as specified and directed. |
| 72 | S&F PVC (SWR) junction single, (Single T) equal or unequal for 110 mm dia pipe complete all as specified and directed. |
| 73 | M&L for 75mm thick cement concrete type C-2 1:3:6 using 40 mm graded stone aggregate as in for plinth protection finished even and smooth without using extra cement including necessary form work complete all as specified and directed. |
| 74 | M&L for concrete bed to drain pipes laid in trenches including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40mm graded aggregate) for 150mm bore pipe complete all as specified and directed. |
| 75 | M&L for reinforced concrete 150mm dia pipes, class NP2, laid and jointed complete with collars, laid on concrete bed including testing complete all as specified and directed. |
| 76 | M&L for 75mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in subase finshed to receive floor complete all as specified and directed. |
| 77 | S&F of tensile car parking/Awning Canopy, white fabric 700 GSM, built on DUCO and Aspa white painted MS Base Structure of make Apollo or Jindal Surya Company as per drawing and as per dirn of Engr-in-Charge. |
| 78 | M&L for cement concrete in foundations, filling and mass concrete Type C (1:3:6) using 40 mm graded aggregate complete all as specified and directed. |
| 79 | Demolition of PCC unreinforced in grounds and pavings complete all as specified and directed. |
| 80 | M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) finishing surface even and smooth without using extra cement as in floor & plinth protection complete all as specified and directed. |
| 81 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces or block masonry wall surface using cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 82 | S & F Cloth drying ceiling hanger with stainless steel pipe 8 feet long heavy duty dear 40kg weight with 8 feet nylon thread with channels, pully and holders as per manufactures instruction fixed with heavy duty fastener minimum 8 Nos complete all as specified and directed by Engr-in-Charge. |
| 83 | Excavating in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth for laying of foundation, sewage/water lines etc not exceeding 10 Sqmtr on plan and getting out in any type of soil |
| 84 | All as per item No 83.00 above but as in soft / disintegrated rock |
| 85 | All as per item No 83.00 above but exc 1.50M and not exc 3.00M. |
| 86 | All as per item No 84.00 above but exc 1.50M and not exc 3.00M. |
| 87 | M&L for Hardcore broken stone of gauge not exceeding 63mm deposited, spread & leveled in layers not exc 15cm thick watered, rolled and rammed to a true surface complete all as specified. |
| 88 | Earth filling under floors incl spreading, leveling, watering and well ramming in layers not exceeding 15 cm thick complete all specified and as directed. |
| 89 | Removal of excavated soil to a distance exc 250 metre and n.exc 500m depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified. |
| 90 | Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) |
| 91 | Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface |
| 92 | Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area |
| 93 | M&L for RCC M-25 Design mix, using 20mm graded trap stone aggregate for concrete as in beams, cantilevers, bressummers, lintels beyond 1.5m span etc., complete. |
| 94 | M&L for RCC M-25 Design mix, using 20mm graded trap stone aggregate for concrete as in columns, pillars, piers, posts and struts etc., complete. |
| 95 | M&L for RCC M-25 Design mix, using 20mm graded trap stone aggregate for concrete as in chhajjas, complete. |
| 96 | M&L for RCC M-25 Design mix, using 20mm graded trap stone aggregate for concrete as in stair case etc, complete. |
| 97 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slab, landings and similar work not exceeding 200mm thick, horizontal or sloping finished rough complete. |
| 98 | M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces. |
| 99 | M&L for Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) for rough finished surfaces |
| 100 | M&L for Rendering 5mm thick in CM (1:3) on concrete surfaces of ceiling, soffits of slabs, shelves, isolated RCC members etc., finished even and smooth without using extra cement.. |
| 101 | Supply only integral liquid water proofing compound all as specified and as directed. |
| 102 | M&L for Preparing newly plastered surfaces of ceilings and applying two coats of oil bound distemper over a coat of primer and a thin layer of putty complete all as specified. |
| 103 | M&L for Preparing newly plastered surfaces of walls and applying 02 coats of acrylic washable distemper over a coat of primer and a thin layer a putty all complete all as specified. |
| 104 | Preparation of new plastered surfaces of walls and applying two coats of exterior grade acrylic emulsion paint over a coat of primer over a thin layer of putty complete all as specified. |
| 105 | Supplying and fixing powder coated aluminium work for door windows vetilators, sliding shutters and partitions with extruded built up standard tubular and other sections of approved make fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners incl necessary filling up of gaps at junctions at top bottom & sides with required PVC neoprene belt etc. Aluminium sections shall be smooth rust free straight mitred and jointed mechanically where ever required including cleats angles, aluminium snap beading for glazing/panelling, CP brass/stainless screws incl providing hinges/pivots and making provision for fixing of fittings where ever required. Note :- panel filling and necessary fitting shall be measured and paid for separatly. |
| 106 | Supply and fixing aluminium grill for aluminium window and ventilator as per direction of egr in charge |
| 107 | S&F double charged/ultracharged Virified Ceramic tiles 10 mm thick (square/ rectangular) scratch & stain resistant, area of each tiles exc 0.42 Sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6 complete |
| 108 | All as per item No. 107.00 above but in vertical surfaces over and including 10mm thick backing coat in CM 1:4 complete |
| 109 | S&F 25mm dia SS curtain rod with and incl matching SS brackets complete fixed in position. |
| 110 | M & L in reapir 12mm thick plain/froasted toughened glass door including stainless steel door handle 300mm long decorative type incl all necessary connected fittings and fixtures for door all as specified and directed. |
| 111 | All as per item No. 110.00 above but with pin headed/figured glass. |
| 112 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mm fixed with stainless steel wire staples. |
| 113 | M&L 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. |
| 114 | S&F grating doom 100mm dia mild steel chromium plated complete. |
| 115 | S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels with and including 1mm thick coloured mica pasted on both sides complete all as specified and as directed by Engineer in Charge. |
| 116 | M&L for Granite (of any type) work 20mm thick (table rubbed or polished) in steps, jambs, pillars, window cills, cooking platforms and like with and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 117 | S&F bib tap long brass body nickle chrome plated standard handle, fancy type screwed down, screwed for pipes 15mm bore fixed. (Make Jaquar/ Hindware/ Kohler or equivalent) |
| 118 | S & F 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put togethr with glue pinned at joints etc., complete, as specified |
| 119 | M&L waste fitting, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed 32mm |
| 120 | S&F low density polythene (LDPE) pipes of pressure rating 6kg/sqcm of 32mm bore complete all as specified and directed. |
| 121 | S & F Door closure hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width of Aluminum body (die cast) weight between 61 to 80 kg |
| 122 | S&F stainless steel Butt hinge 100mm size. |
| 123 | S&F SS 150mm long handles. |
| 124 | S&F SS barrel tower bolts of 150 mm long. |
| 125 | S&F 250mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed |
| 126 | Supply & Fixing stainless steel tubular towel rack long between flanges. |
| 127 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth in stone concrete block or slab walls. |
| 128 | M&L for applying elastomeric water proofing paint on top of roof over and incl 10mm thick rendering in CM 1:4 with liquid water proofing compound complete as per mfg instructions incl all necessary preparation |
| 129 | M&L for Damp proof course, 40mm thick in cement concrete (1.2.4) type B-0 using 12.5mm graded stone aggregate using WPC to horizontal & vertical surfaces including necessary form work complete all as specified.( WPC shall be measured and paid separately). |
| 130 | M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm |
| 131 | M&L for Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m |
| 132 | S&F 25mm dia medium grade steel water tubing galvanised with all fittings & fixed complete to wall and ceiling or laid in floor. |
| 133 | S&F Stop cock cock brass body nickle chrome plated with long shank and flange (concealed type) for pipes 15mm bore (Make Jaquar or equivalent) |
| 134 | All as per item No 133.00 above but angle cock without concealment |
| 135 | S&F stainless steel shower roses 150mm x 150mm size, with swivel arm including fixing to steel pipe, (Make - Jaquar or equivalent) |
| 136 | S&F Vitreous china coloured or white single piece water closet European type with and incl flushing cistern including fixing with P trap, seat cover incl connected fittings all complete as specified. |
| 137 | S&F rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with and incl ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed. |
| 138 | S&F 20mm bore brass Union to connect iron to polyethylene tank complete fixed as directed by Engr- in -Charge |
| 139 | M&L for Hasp & staple, safty type of steel section type 125mm |
| 140 | S&F glass corner shelves (set of three) mouted on stainless steel frames fixed with cadmium plated screws including necessary fixing arrangement complete including fixing to wall. |
| 141 | S&F looking mirror, bevelled edge, of selected quality glass, mounted on stainless steel purpose made screws fixed to wall complete. |
| 142 | S&F 1.25mm thick MS fan hook box having 10mm dia SS hook to hang the fan |
| 143 | M&L for 18mm thick WPC board, prelaminated one side with decorative choice lamination & other side balancing white lamination & fixed with screws to aluminium/timber/WPC frame as in cupboards / cabinets complete |
| 144 | S&F Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 30 mm, fixed with steel screws complete all as specified. |
| 145 | Supply and fix 25 mm outer dia CPVC pipes SDR 11 with and incl plain CPVC SDR 11 fittings fixed on walls / ceilings or laying in floors complete all as specified & directed by Engr-in-Charge |
| 146 | Supply and fix 20 mm outer dia CPVC pipes SDR 11 with and incl plain CPVC SDR 11 fittings fixed on walls / ceilings or laying in floors complete all as specified & directed by Engr-in-Charge |
| 147 | Material and labour for 150 mm dia reinoced cement concrete pipe, class NP-3 laid in trenches and jointing with collars complete all as specified and directed. |
| 148 | Material and labour for PCC 1:4:8 tyope D-2 using 40 mm graded stone aggregate as in cocrete bed to drain pipe of bore 150mm dia including packing under and haunching ahainst the sides of pipes after they are lay laid and tested complete all as specified and directed. |
| 149 | Material and labour for PCC 1:2:4 type B-2 using 20 mm graded stone aggregate as in surface channles, drain complete all as specified and directed. Note: Forming fair finished channel shall be measured and paid separately. |
| 150 | Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc. all as specified and directed. |
| 151 | S&F 110mm dia PVC (SWR) vent cowl complete all as specified. |
| 152 | S & F 110MM PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. |
| 153 | M&L for concealed conduit point wiring controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 25 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLSH copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly including Metal flush mounting box and white colour plates with frame for modular fitting complete all as specified and directed. |
| 154 | All as per item No. 153.00 above but One light Point controlled by one, one way switch |
| 155 | All as per item No. 153.00 above but One fan point controlled by one, one way switch |
| 156 | All as per item No. 153.00 above but One socket outlet 3 Pin, 5 Amp on same board. |
| 157 | All as per item No. 153.00 above but with 2.5 sqmm for phase &neutral and 2.5 sqmm for earth wire for socket out let 5 Amps on independent board. |
| 158 | All as per item No. 153.00 above but with 4 sqmm for phase &neutral and 4 sqmm for earth wire for socket out let 15 Amps on independent board. |
| 159 | S&F Modular switch 6 Amp 250 V AC one way one module complete all as specified and directed. |
| 160 | S&F Modular switch 16/20 Amp 250 V AC one way with indicator one module complete all as specified and directed. |
| 161 | S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 162 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 163 | Supply and fix Modular fan regulator 230 volts, step type,socket type ,hum free 120 watt ISI Marked. |
| 164 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/ Polycarbonate v, isolated body (ISI Marked) |
| 165 | M&L for wiring for circuit/submain wiring with PVC unsheathed single core multistranded copper conductor cable of size 4 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling including one run of PVC insulated FRLSH copper conductor cable of 4 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board or Metal clad box for AC |
| 166 | Supply & fix in repair single pole and neutral enclosure 2 module in sheet steel with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA complete all as specified and directed. |
| 167 | M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 6.00 Sq mm 1100 volts grade including and 06.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC conduit incl cutting, chases in stone wall and match with the existing surface complete all as specified and directed.Note : Two run of 06.0 Sqmm cable and one run of 6.0 Sqmm cable as earth continuity conductor shall be measured & paid as one unit. |
| 168 | Supply and fixing Surface and wall mounted LED tube light fittings of cap 20W , four feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver including taking downwith all as specified and directed. |
| 169 | Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated bus bar 240 Volts 8 way (2 + 6 way) single pole and neutral including taking down complete all as directed by Engineer-in-Charge. |
| 170 | S&F in repair MCB, 6 to 32 Amp, SP, 240 Volt complete all as specified and directed. |
| 171 | S&F in repair MCB, 32 Amp, SPN, 240 Volt complete all as specified and directed. |
| 172 | M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I.(ii) Item includes the cost of 7.50m GI pipe for protection of earth wire/strip Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate. |
| 173 | S & F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire |
| 174 | Supply and Fixing Ceiling fans complete with blades,down rods,electronic regulator and accessories,230 v, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. 5Star rated with brushless direct current motor (BLDC) |
| 175 | M&L for Anodised aluminium snap grid frame work for false ceiling all as specified complete all as specified and directed. |
| 176 | M&L for Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium frame work with screws complete all as specified and directed. |
| 177 | M&L for Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GE flat 40x3mm size 60mm long and expansion hold fasterners 12.5mm dia, 40mm long complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender