Tender For Special Repairs To Toilet In Billet Area At Afs Jaisalmer
Tender Value
19.41 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
16 days left
EMD
38820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Toilet In Billet Area At Afs Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | Taking down door chowkats or frames exc.1.5sqm but nexc 4 Sqm each with shutters (without taking off shutters from the frame). |
| 2 | Taking down chowkats or frames n. exc.1.5sqm each with shutters (without taking off shutters from the frame). |
| 3 | M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of watertanks etc ant type of work complete all as specified and directed. Fe 410 -W (Gde- E- 250) quality-A |
| 4 | S&F 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated complete |
| 5 | S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm th rigid PVC foam sheet reinforced with MS sq tube as per specification complete |
| 6 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing. |
| 7 | S&F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames & shutters of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard / appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge. |
| 8 | S&F for expanded metal mesh Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer - in- charge. |
| 9 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.80 Sqm in each panes fixed any bldg hight complete all as specified and directed. |
| 10 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each panes fixed any bldg hight complete all as specified and directed. |
| 11 | S&F Stainless steel (Grade S 304) wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed. |
| 12 | S&F 100mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodisedand fixed type B-21 |
| 13 | S&F 100 mm size aluminium anodised barrel tower bolt of extruded section . |
| 14 | S&F 300MM Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 15 | S&F aluminum anodized handle cast type 150mm size |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 17 | M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 18 | M&L for (300mm x450mm) x 6 to 7 mm thick coloured glazed ceramic tiles as in dado etc over and including 15mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed. |
| 19 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or any thickness and in any position etc.complete all as specified and directed |
| 20 | M&L for 20 mm thick Granite platforms and like in 15 mm thick cement morter (1:6) screed bed including pointing in match cement (1:2) using Marble dust with admixture of pigment to match with shade of Granite including cutting/polishing to accommodate counter basin & polishing to edges. |
| 21 | Taking up or down steel tubing and connections 15mm bore complete all as specified and directed. |
| 22 | Taking up or down steel tubing and connections 20mm bore complete all as specified and directed. |
| 23 | Supplying and laying of CPVC pipes 20mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 24 | Supplying and laying of CPVC pipes 25mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 25 | M &L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick /stone wall. |
| 26 | S & F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed. |
| 27 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks TRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I including disconnecting/ dismantling of existing tank complete all as specified and directed. |
| 28 | Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete. |
| 29 | M&L for Rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces and stone masonary and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 30 | M&L for Rendering 10 mm thick in cement mortar 1:6 on brick work or concrete surfaces and stone masonary and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 31 | M & L for rendering 5 mm thick on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and fair without using extra cement complete all as specified and directed. |
| 32 | M&L for prepration of old decorated plastered surfaces of walls finished with white putty by washing down and stoping and applying one coat of oil bound distemper white or tinted. |
| 33 | M&L for two coat of oil bound distempering after preparation of newly plastered wall surfaces over a coat of primer finished even and smooth complete |
| 34 | M&L for preparing of new plastered sufarce of ceiling and applying three coats of white wash all as specified and directed. |
| 35 | M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer. complete all as specified and as directed. |
| 36 | M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide zink chrome primer. complete all as specified and as directed. |
| 37 | M&L for RCC (1:2:4) using 20mm graded stone aggregate as in foundations raft footings, plinth beams ,bases of columns and mass concrete complete all as specified. |
| 38 | M&L for RCC (1:2:4) using 20mm graded stone aggregate as in Beams, cantilevers, bressumm ers, lintels over 1.5m span complete all as specified. |
| 39 | M&L for RCC (1:2:4) using 20mm graded stone aggregate as in slabs supported on walls, beams and chajjas, landings, balconies shelves and the like complete all as specified. |
| 40 | Dismantling of existing solar water heating system carefully to specified location or any store in station area and refixing it after B/R maintenance work to same/specified location as directed by Engineer-Incharge. |
| 41 | M&L for 20mm thick cement screed in cement mortar 1:4, including finishing even and smooth with out using extra cement mixed with water proofing compound @3% by weight of cement over cleaned roof surface, as in grading to RCC roof surface,complete all as specified. Note - Water proofing compound shall be measured and paid separately. |
| 42 | M & L for applying fibre reinorcement elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflecivity index (SRI) upto 105 on top of concrete roof in three coats @ 10.76 ltr/10 Sqm. One coat of self -priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid 500 microns) after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 43 | S&F in repair water closet vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest front/back inlet (excluding flushing cistern and flush pipe) including provision of cement concrete bedding in PCC (1:5:10) type E2 and making good to disturb surface. |
| 44 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed. |
| 45 | S & F in repairs 15 mm bore Fancy type swan neck pillar tap cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 46 | S&F in repairs countertop wash basin of size (560x450)mm white colour excluding taps, complete all as specified and as directed. ZEN-10049 or Equivalent . |
| 47 | S & F in repairs Vitreous China wash basin, angle back, size 600x480mm white, including 15mm fancy type pillar tap, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified. |
| 48 | S&F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugh bedding Urinal against wall in CM 1:2 securing Urinal to plug with and including 60 mm long brass screw pointing around urinal back in cement etc complete all as specified. |
| 49 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing the debries to distance not exc 50 m from site all as directed. |
| 50 | M&L for Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, 50-65mm thk, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete |
| 51 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as binding with and including mild steel wire (Annealed) not less than 0.9mmdia or securing with clips |
| 52 | M & L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsNote : Additional Reinforcement: In the case of the shear reinforcement also, if the diameter of the rebars are reduced, provide 5mm dia and over upto and incl 10mm dia stirrups in the form of 2 \\"U\\" shaped bars. Tie them properly so that it has a tight contact with the main bars. |
| 53 | M&L for Use and waste of fair finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking plateform and similar work not exc. 200 mm thick. |
| 54 | M&L for Use and waste of fair finished flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 55 | M&L for Use and waste of fair finished flat Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc |
| 56 | S&F in repairs low level flushing cistern 10 ltrs capacity, valveless, syphonic action type with inlet, ball valve, float and handle, body moulded from virgin quality high impact poly propoliyone including brackets and 32 mm dia PVC flush pipe for low level flush cistern complete all as specified and directed |
| 57 | S & F in repair 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 58 | S&F in repairs stop valves 15mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union. complete all as specified and as directed. |
| 59 | S & F in repair fancy type chromium plated 15 mm bore angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 60 | S&F in repair chromium plated health faucet 15 mm dia screwed down high pressure 1.8 mtr tube & hook Make-Jaguar, Code-ALD CHR 583 or techno commercially equivalent as approved by GE complete all as specified and directed. |
| 61 | S & F in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specied and directed.. |
| 62 | S&F in repairs of Brass chromium plated shower rose 125mm size. |
| 63 | S&F in repairs 8mm thick high quality looking mirror of area not exceeding 3.0 sqm with fancy type beading fixed to wall with chromium plated screw complete all as specified and as directed |
| 64 | S & F in repair PVC connections suitable for 15 mm dia pipe with PTMT nut of length 600 mm. |
| 65 | S & F in repair PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement. |
| 66 | S&F in repair PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints laid in trenches/floor or fixed to walls including digging and making good as existing. |
| 67 | S&F in repair 110 mm PVC (SWR) Junction single (Single T) equal or unequal with access door |
| 68 | S&F in repair 110mm dia PVC (SWR) vent cowl . |
| 69 | S&F in repair PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to walls including digging and making good as existing. |
| 70 | S&F in repair 75mm dia PVC (SWR) bend any radius with access door . |
| 71 | S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 110mm pipe complete all as specified |
| 72 | S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 75 mm pipe complete all as specified |
| 73 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete |
| 74 | M&L Cement concrete 1:3:6 type C2 (40 mm graded stone aggregate) 75 mm thick in plinth protection and provided joints 10 mm wide & full depth at 3 m distance and every change of direction filled with sand and bituminious mix 1:3 complete all as specified and directed. |
| 75 | M & L 25 mm cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in 25 mm thick levelling coarse in flooring finished even and rough. |
| 76 | Supply only integral water proofing compound complete all as specified and directed |
| 77 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc. |
| 78 | M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-I (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:6 etc complete all as specified. |
| 79 | Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below complete all as specified and directed (a) S&F drainage spout pipe GI 40 mm dia bore light grade up to outside of outer wall (appx 450 mm dia to 600 mm long) (b) M&L for PCC 1:1:5:3 type B-O( using 12.5 mm graded stone aggregate ) 50 mm thick laid in slope towards drainage out spout pipe mixed with Water proofing chemical as per manufacturer instructions of MAKE : FOSROC/SIKA/PIDILITE/STP or equivalent as approved by GE 150mmx150mm (min) at appropriate location for free flow of leaked water if any drainage spouts shall be provided integrallywhile laying PCC. fixing of spout shall be done with same PCC as in this item. (C)M&L 18 mm thick cement plaster in CM 1:3 on vertical faces mixed with water proofing chemical of MAKE:301 Pidicrete URP of Dr Fixit or other techno commercially Equivalent make of SIKA /PIDILITE/ FOSROC/STP or equivalent as approved by GE Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender