Tender For Special Repair Of 02 X Toilet Block Of Senior Boys Hostel Of Aps At Beas Under Ge Kapurthala
Tender Value
16.56 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
5 days left
EMD
33120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of 02 X Toilet Block Of Senior Boys Hostel Of Aps At Beas Under Ge Kapurthala
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Special repair of 02 x toilet block of senior boys hostel of APS at Beas under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 3 | M&L for glazed ceramic tiles dark shaded 1200mmx600mmx10 mm thick (square/ rectangular) polished, area of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 4 | Demolition of cement concrete any description in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | M&L for 75mm thick PCC 1: 4: 8 type D2 using 40mm graded aggregate as in flooring in sub base complete all as specified and directed. |
| 6 | M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as specified and directed. |
| 7 | M&L for non skid Ceramic tilesDark shaded 1200mmx600mmx10 mm thick (square/ rectangular) polished, area of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 8 | Taking down cement plaster of any thickness on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water built in cement mortar complete all as specified and directed. |
| 9 | M&L for rendering 15mm thick cement plaster with (1:4) cement mortar on brick/ concrete work and finished ,even & smooth(without using extra cement) as directed using WPC @ 3% by wt of cement.Note:- WPC shall be measured & paid separately |
| 10 | M&L for endering 15 mm thick in cement mortar 1:6 on of brick/ concrete work, finished even and smooth using extra cement complete all as specified and directed |
| 11 | M&L for rendering 5 mm thick cement plastering on concrete surfaces as in ceiling in cement mortar (1:3) finished even and smooth without using extra cement all as specified and directed. |
| 12 | M&L for applying one coat of wall care putty not less than 2mm thick complete all as specified and directed. |
| 13 | M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 14 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified. |
| 15 | M&L for preparation of new plastered surface of ceiling surface and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.Note:- Only roller be used for painting . |
| 16 | Dismantling water tanks and removing to store for 1000 ltr capacity complete all as specified and directed |
| 17 | S&F of 1000 ltr capacity rotational moulded polythylene water storage tanks of (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed |
| 18 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) area n. exc 1.5 Sqm complete all as specified and directed |
| 19 | Taking down chowkats of frames with shutters (without taking off shutters from the frames) exc 1.5.Sqm & not exc 4 Sqm each complete all as specified and directed |
| 20 | Taking down GI tubing of 15 mm dia and connection incl cleaning for refixing or removal complete all as specified and directed |
| 21 | Taking down GI tubing of 20 mm dia and connection incl cleaning for refixing or removal complete all as specified and directed |
| 22 | S&F of 16 mm dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in wall or laid in floors complete all as specified and directed |
| 23 | S&F of 20 mm dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in wall or laid in floors complete all as specified and directed |
| 24 | M&L for 75mm thick PCC 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and fair without using extra cement. |
| 25 | Supply only intergal water proofing compound complete all as specified and directed |
| 26 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed |
| 27 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note:- stainless steel butt hinges and necessary S S screws shall be paid separately |
| 28 | S&F of butt hinges, 125mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed type B-21complete all as specified and directed . |
| 29 | S&F of 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed . |
| 30 | S&F of sheet glass,5.5mm thick ordinary quality and glazing with oil putty/beading as required area n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 31 | S&F for uPVC frame for window/ventilator of size 110 x 35mm with weight not less than 1.5 kg/Rm fixed to wall opening with holdfast PCC and incl necessary arrangement complete all as specified and as directed. |
| 32 | S&F for uPVC side hung shutter for glazed window/ventilator with x-sectional area of rail 72 x 62mm fixed to existing frame incl necessary arrangement for fixing glass complete all as specified and as directed. Note :- Glass and wiremesh will be paid separataly |
| 33 | S&F of aluminium (Die cast) body door closer hydraulically regulated, esignation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed |
| 34 | S&F of stainless steel butt hinges, 100 mm long medium weight, complete all as specified. |
| 35 | S&F of aluminium anodised barrel tower bolt of extruded section of size 150 mm for PVC door complete all as specified and directed |
| 36 | S&F of extrued aluminium alloy handles, fabricated type, anodised of size 150 mm for PVC door complete all as specified and directed by Engr-in- charge. |
| 37 | S&F of vitreous china squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified. |
| 38 | S&F of vitreous china wash down water closet pan size 580x440mm coloured with pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.complete etc fixed in repairs, complete all as specified. |
| 39 | S&F of PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 60/90 cm long etc, supplied and fixed in repairs, complete all as specified. |
| 40 | S&F of plastic water closet seat cover, closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device (colour of cover should match with water closet) complete all as specified. |
| 41 | S&F of chromium plated health faucet (ABS Body) with 1.2m long PVC tube & wall hook complete all as specified and directed. |
| 42 | S&F in repair vitreous china wash basin,repair white flat back, size 630X450 mm including brackets PVC waste pipe 32 mm dia, 32 mm dia waste coupling PTMT (half or full threaded), fibre reinforced PVC connection 45 cm long with PTMT nuts at both end |
| 43 | S&F in repair PVC connection 15 mm dia, 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 44 | S&F of CP stop valve/ angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair for 15mm bore complete all as specified and directed. |
| 45 | S&F in repair bib tab 15 mm dia fancy type chromium plated crutch handle standared of any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. |
| 46 | S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 47 | S&F in repair stop valve 20 mm dia cast copper alloy, secrewed down high pressure, with crutch or butterfly handle secrewed both ends for iron pipe and fixed complete all as specified and directed |
| 48 | S&F in repair pillar tap 15 mm dia cast copper alloy fency tpye with swan neck chromium plated screwed down high pressure with or without lettered hot or cold with long screwed screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed |
| 49 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed |
| 50 | S&F in in repair 20mm ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 51 | S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps all complete all as specified and directed |
| 52 | S&F in repair PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps all complete all as specified and directed. |
| 53 | S&F of PVC SWR bends of 110 mm bore complete all as specified and directed. |
| 54 | S&F of PVC SWR bends of 75 mm bore complete all as specified and directed. |
| 55 | S&F of PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed. |
| 56 | S&F of PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia complete all as specified and directed. |
| 57 | S&F of PVC (SWR) floor trap plain including greeting jointing with solvent cement 75 mm dia complete all as specified and directed. |
| 58 | S&F of PVC (SWR) vent cowl 75 mm bore complete all as specified and directed. |
| 59 | S&F of PVC (SWR) branch piece, single (single Y) equal or unequal rovided with access door of 75 mm dia complete all as specified and directed. |
| 60 | S&F of PVC (SWR) branch piece, single (single Y) equal or unequal rovided with access door of 100 mm dia complete all as specified and directed. |
| 61 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendereing, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 150mm complete all as specified and directed. |
| 62 | M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 63 | Supply only 4mm thick ordinary quality frosted/obscure glass fixed to upvc window/ ventilator complete all as specified and directed. |
| 64 | S&F of soap dish CP white, approximate size 160x 160x90mm soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 65 | S&F of brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 66 | S&F in repair towel rail brass chromium plated 20mm dia 600 mm long complete all as specified and directed. |
| 67 | S&F of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 68 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 69 | S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with grating and union for dischage pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe complete fixed in repairs. complete all as specified and as directed. |
| 70 | S&F of 10 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 71 | Demolition of brick work/ stone masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 72 | M&L for brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 complete all as specified and directed. |
| 73 | Filling of sunken floor with PCC 1:5:10 using 40mm graded crushed stone aggregate including breaking and removal of existing filling of lime concrete/PCC/brick bats and rubbish out off the premises, etc complete all as specified and directed. |
| 74 | M&L for two coats of hot bitumen on newly plastered surface of sunken portion not less than 1.2 Kg/Sqm complete all as specified and directed. |
| 75 | M&L for plasteing in cement mortar (1:3) 15mm thick with WPC (200ml per bag of cement) on walls/ floor as on sunken floor finished even and smooth using extra cement,complete all as specified and directed. Note:- After plaster, testing be carried out in the sunken portion by ponding for 72 hrs before further treatment to check any leakage/seepage. If observed shall be rectified without any extra cost). |
| 76 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc; |
| 77 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC (FRLS) insulated copper conductor common earth and connecting to earth dolly for :- |
| 78 | One light point controlled by one 1-way switch complete all as specified and directed. |
| 79 | One ceiling / exhaust fan point controlled by one switch complete all as specified and directed. |
| 80 | One three pin socket out let 5 amps on independent board complete all as specified and directed. |
| 81 | One three pin socket out let 5 amps on same board complete all as specified and directed. |
| 82 | - ditto - all as per item No 76 above but with 2.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one 3 pin socket out let 15 amps on independent board complete all as specified and directed. |
| 83 | S&F of switch piano modular type 6A 240 Volts complete all as specified and directed. |
| 84 | S&F of switch piano modular type 15A 240 Volts complete all as specified and directed. |
| 85 | S&F of socket outlet modular type 2 in 1, 3 pin, 5/6 amp with shutters complete all as specified and directed. |
| 86 | S&F of socket outlet modular type 2 in 1, 3 pin, 5 and 15 amp with shutters complete all as specified and directed. |
| 87 | S&F of ceiling rose surface type bakelite 65 x 50 mm with three terminals complete all as specified and directed. |
| 88 | Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface. |
| 89 | S&F of LED light fitting 1x20 watt, 220 volt AC decorative box type with driver, holders,including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed. |
| 90 | S&F in replacement of lamp holder, PVC/Polycarbonate angular type with LED lamp base B-22 (holder type) 7 watts complete all as specified and directed. |
| 91 | S&F of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 volt AC decorative type with driver, holders,including LED lamp connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. |
| 92 | S&F of heavy duty exhaust fan copper wound with double ball bearing continuous duty with louvers, with fixing arrangements & making hole of suitable size if necessory for 300 mm sweep, 900 rpm, 230V complete all as specified and directed. |
| 93 | S&F of sheet steel factory made, powder coated MCB DB with bus bar 200Amps neutral link, earth bar, double door SPN 8 way 230 volts complete all as specified and directed. |
| 94 | S&F of MCB single pole 240 volts 6-32 Amps, 10KA, B-series complete all as specified and directed. |
| 95 | S&F of MCB SPN 240 volts 0- 32 Amps, 10KA, B-series complete all as specified and directed. |
| 96 | M&L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 3 runs of 6 sqmm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Note: (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads. (iii) Concealed wiring if not technically feasible, contractor will provide the surface mounted submain wiring with PVC conduit and other fittings at the discretion of Engineer-in-charge at no extra cost. |
| 97 | S&F of electric water heater, storage type ABS body with metalic inner tank and heating element capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, automatic thermal cut-out and multi function valves, NRV, 450 mm brass connection pipe etc; complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender