Tender For Special Repairs To 20 X Shutter Of Special Vehicle Garages Of 344 Msl Regt At New Mil Stn Kapurthala Under Ge Kapurthala
Tender Value
18.95 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
2 days left
EMD
37900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To 20 X Shutter Of Special Vehicle Garages Of 344 Msl Regt At New Mil Stn Kapurthala Under Ge Kapurthala
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Special repairs to 20 x shutter of special vehicle garages of 344 MSL Regt at New Mil Stn Kapurthala under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | S&F of motorized side-operated electric motor for MS rolling shutter of size 5.5 m (Width) × 5.0 m (Hight), shutter weight min 800 Kg or above, 230V AC single phase 50 Hz, 400–550W (for heavy duty min 0.75 HP or as recommended by OEM), 640 N·m torque, 4.1 Rpm speed, with push button control (Up/stop/down), chain operation for manual over ride, limit switches, safety brake, and complete mounting bracket set as per IS-6248 complete all as specified and directed. |
| 3 | M&L for providing and fixing heavy-duty electrically operated worm gear box gear motor set for roller shutter of size 5.5 m (W) × 5.0 m (H), shutter weight 800 kg, 460 W (0.75 HP), 230V AC single phase 50 Hz, output torque 647 N·m minimum, gear ratio 40:1, output speed 3-7 RPM, maximum lifting height 8-9 m, hardened steel worm gear with bronze wheel, IP 54 protection class, side-mounted with brackets included, manual chain over ride and crank handle operation, push button control (Up/stop/down), 2 remotes, receiver, lock box and complete hardware accessories, seal for life lubrication, 1 year warranty, complete all as specified and directed. |
| 4 | M&L for sub main wiring with one runs of three core PVC insulated, unsheathed copper condutor, multi stranded cable of size 4.00 Sqmm 1100 volts grade drawn PVC surface/recessed conduit of size 19/20 mm (ISI marked) including PVC accessories complete including cutting and chasing and making good to disturbed surface of wall/floor/etc; complete all as specified and directed.Note:- (i) One run of three core 4.00 Sqmm cable and one run of PVC conduit shall be measured & paid as one unit. (ii) 15 Rm considered for each motor) |
| 5 | - ditto - all as per above item No. 3 but single core copper wire of size 2x2.5 sqmm + 1x2.5 sqmm earth wire and in casing caping complete all as specified and directed. |
| 6 | S&F in repair LED flood light 70 watt 230 V AC outdoor type, not less than 105 lumens/watt , toughned glass with high pressure die cast aluminum hosing, thermal management in multiple optics, IP-66 protection, impact and corrosion resistant complete with driver and lamp all as specified and directed. |
| 7 | Supply, install, testing and commissioning of LT Distribution Panel (CPRI type tested) cubicle type IP-65 , Outdoor type confirming to IS-61439 factory fabricated prewired made out of 3.15 mm thick CRCA sheet outer & 2 mm thick CRCA sheet inner of suitable size to accommodate all accessories/ fittings compartmentalized in construction to accommodate the incoming/outgoing MCCB ad TPN bus bars and outgoing feeders. The TPN bus bars shall be insulated with colour coated heat shrinkable sleeve and shall be mounted on DMC support. The incoming as well as outgoing MCCBs shall have extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders.The extension links shall be supported on DMC support having provision of termination of incoming and outgoing cables. All extension links/ interconnections shall be colour coated sleeves. The cubicle shall have frame work at bottom of MS channel MC 100 fixed to the top of platform. The plateform of LT Panel shall be pedestal type of suitable width and 600 mm height above ground level and minimum 400 mm below the ground level constructed with bricks (sub class 'B') work duly plastered in cement mortar 1:3 and PCC copping (1:2:4) not less than 50 mm thick over brick pedestal with adequate opening for entry of cable complete as per manufacture recommendation and as directed. A detachable gland plate of thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size compression glands, the panel shall be painting with powder coated finish with RAL 7032 SIEMENS GRAY structure after seven tank phosphate treatment front & back opening type and fixing 2 Nos danger notice plan with letter figures and conventional skull bones in signal red colour and fixed front & back door to LT Panel with voltage and danger indicated in Hindi and English with double door shutter and shall have louvers and air vent gasket for natural flow of air Neoprene adhesive type gasket shall be used to make panel vermin proof & comprising of following :- |
| 8 | Incoming:- MCCB 4 Pole, 250 Amps ,415 Volt of breaking capacity 35 KA with Ics=100%Icu Adjustable thermal and adjustable magnetic release - 01 Nos.Busbar:- TPN 500A - 01 Sets.Outcoming:- MCCB 4 pole 415 V 63 Amps 25 KA, Ics=100%Icu Adjustable thermal and adjustable magnetic release - 05 nosMCB 4 pole 415 V 06-32 Amps 10 KA, TM release - 01 nosVoltmeter (0-500) V digital type with selector switch.-01 No, Astro timer switch with auto ON/Off to street lights including TPN MCB 15A Ampere Meter (0-500) Amperes, 96mm square, digital type, CT connected with suitable CTs and selector switch-)1 No, Phase indicator, LED type each Set |
| 9 | Supplying and laying of cable XLPE insulated screened PVC bedded,galvanised steel strip or wire armoured,electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed. |
| 10 | Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation of poles/ stays/ laying of cables etc and getting out including trimming of sides of trenches complete all as specified and directed. |
| 11 | Returning, filling the soft / loose soil including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick each layer complete all as specified and directed. |
| 12 | Removing of excavated soil to a distance n.exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 13 | M&L for sand cushioning with a layer of fine sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified and directed. |
| 14 | M&L for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed. |
| 15 | M&L for steel tubing GI light grade 50 mm dia for cable protection, passing under road/floor or for fixing to poles/walls all as specified and directed. |
| 16 | Taking down existing steel rolling shutters size not excedding 5.00 x 5.50 m with all connecting items and repairs/ replace the lath of steel rolling shutters and locking arrangements, greasing, tightening of helical wire spring including welding wherever required, oiling, etc complete ao make in serviceable condition and applying two coat of synthetic enamel paint including preparation of old painted surfaces and refixing in the same opening complete all as specified and directed. Notes:- (i) Lath of steel rolling shutters, lock plate with locking arrangement and shall be measured and paid for separately.(ii) Spring will be included in the rate of item (iii) supply only unserviceable items shall be measured and paid separately under respective items. |
| 17 | Taking down existing steel rolling shutters size not excedding 5.00 x 5.20 m |
| 18 | S&F of 1.25mm thick laths steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as directed, complete push pull or manual type. |
| 19 | S&F of ball bearing for rolling shutters as required as per site, complete all as specified and directed. |
| 20 | S&F of saftey lever locks mild steel with 4 leavers for rolling shutters complete all as specified and directed. |
| 21 | S&F of prefabricated lock plate length not less than 2.20 and not more than 4.00 mm and width not less than 0.15 m and not more than 0.20m of riveted construction made out of mild steel sheet 3.15 mm thick ,rainforced with mild steel angle 3 x 35 x 5 mm size at bottom and locking arrangement with two 50 mm bow handles and flat iron 25 x 3 mm to fix the lath and lock plate complete all as specified and directed. |
| 22 | S&F of guide channel,made out of 2.00 mm thick MS sheet size 75 x 30 mm including taking down the existing guide channel from rolling shutter and fixing with wall / column etc; and making good with (1:2:4) PCC and cement work (1:3) and two coat of synthetic enamel paint on over a coat of red oxide primer complete all as specified and directed. |
| 23 | M&L for 2 mm thick MS sheet hood cover of rolling shutter to accommodate the spring and lath when rolling shutter open including two coat of synthetic enamal point over a coat of red oxide primer, and taking down the existing cover complete all as specified and directed. |
| 24 | M&L for replacement of defective rolling shutter shaft as required as per site including dismantling, providing and fixing new MS shaft with bearing assembly, alignment and testing complete all as specified and directed. |
| 25 | M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender