Tender For Repairs To Fencing, Gate, Compound Wall And Certain Misc Works At Inhs Asvini Under Age(I) Asvini, Colaba, Mumbai
Tender Overview
Project Description
Tender for Repairs To Fencing, Gate, Compound Wall And Certain Misc Works At Inhs Asvini Under Age(I) Asvini, Colaba, Mumbai
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Nov-2026 | Corrigendum | BOQ | 14-Nov-2026 |
| 2 | 05-Nov-2026 | Corrigendum | Date | 14-Nov-2026 |
| 3 | 14-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land complete all as specified and directed by the Engr in charge. |
| 2 | M&L for RMC (ready mix concrete) M-25 in hardstanding/plinth protection including curing properly with making vatta of CM upto 15 days complete all as specified and directed by Engr-in-charge. |
| 3 | M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade A, thickness of concrete slab 150 mm complete all as specified and directed by the Engr in charge.. |
| 4 | M&L for anti-mouse/rodent treatment under paths, hardstanding and plinth protection comprising identification of live rodent burrows, cavities and openings below/adjacent to paved surfaces, carrying out necessary minor excavation and cleaning to expose the affected areas, placement of approved rodenticide bait containing 100 gram of Bromadiolone 0.005% w/w Ready Bait (RB) formulation inside identified burrows/rodent harbourages, strictly in accordance with the manufacturer's approved label, prescribed dosage and method of application, including closing/sealing of the treated burrow opening with suitable loose soil after placement of bait, and all labour, tools, plant and incidental operations complete, all as specified and directed by the Engineer-in-Charge.Note:-(i) Periodicity for the same shall not be more than once in a month at the same location.(ii)Hardcore filling and compaction,if required, shall be measured & paid for separately.(iii) Providing and laying RMC M-25 PCC for permanent sealing of treated burrows/openings shall be measured and paid for separately .(iv) The rate shall include identification, preparation, treatment and closure of each identified live rodent burrow/harbourage, including all incidental operations necessary for completion of the treatment.(v) The rodenticide shall be an approved registered product containing Bromadiolone 0.005% w/w RB, or equivalent approved formulation, and shall be used strictly in accordance with the manufacturer's current approved label/technical literature and safety instructions. |
| 5 | M&L for hardcore of broken stone or boulders of gauge n. exc 63mm, deposited, spread and leveled in layers n. exc 15cm thick watered and rammed to true surface complete all as specified. |
| 6 | M&L for Coloured 40 cm x 40 cm x 10 mm thick Non skid (Hi Traffic grip tiles) set jointed and pointed in neat cement slurry in floors over 20mm of screed bed in CM 1:4 including sealing the edges in PCC 1:2:4 Type B1, including dismantling of stone slabs and tiles, complete all as specified and directed by Engineer in Charge |
| 7 | M&L for providing and laying machine-cut flamed granite stone setts/cobblestones of size 100×100×80 mm in approved colour, texture and 45° herringbone pattern over 30 mm thick screed bed in CM 1:4, over 100 mm thick PCC M-10 laid on 200 mm thick compacted Hardcore (broken stone or boulders) of gauge n exc. 63mm, including edge restraints, joint filling with polymeric sand/granite fines, vibration compaction using plate compactor with neoprene pad, giving proper drainage slope complete all as per specifications and directed by Engr in Charge. |
| 8 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base and finished fair and even complete all as specified. |
| 9 | M & L for 25mm thick sand filling in floors or paving, laid in layers n.exc 15 cm thick, spread, leveled & rammed including watering complete all as specified. |
| 10 | M&L Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size conforming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade (using 20mm graded stone aggregate) complete all as specified and directed by Engineer - in - Charge. |
| 11 | Material and Labour for lifting carefully existing interlocking concrete paver blocks of any size, shape and thickness, stacking aside, removing loose earth, sand and debris, cleaning the paver blocks, sorting out damaged/broken paver blocks, preparing the surface for laying, re-fixing the cleaned serviceable paver blocks to correct line, level, slope and camber over PCC base (PCC shall be measured and paid separately), including filling joints with coarse sand, compacting with plate compactor/hand rammer, making good disturbed edges, disposing of unserviceable materials up to lead specified , complete all as specified and directed by the Engineer-in-Charge.Note- Rates includes dismantling, cleaning, stacking, relaying, joint filling, and compaction. |
| 12 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 13 | S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed by Engr in Charge |
| 14 | Taking down cement plaster on brick wall including racking out joints, hacking for key scrubbing down with water and removing debris outside MD land complete all as specified directed by Engr-in-Charge.. |
| 15 | M&L for rendering 15mm thick Ready Mix plaster (1:6) on fair faces of brick work or concrete surfaces of wall and finishing even and smooth using wall care putty not less than 2.00mm thick complete all as specified and directed by Engr-in-charge. |
| 16 | M&L for rendering 10mm thick Ready Mix plaster (1:3) on fair faces of concrete surfaces of ceiling and finishing even and smooth using wall care putty not less than 2.00mm thick complete all as specified and directed by Engr-in-charge |
| 17 | M&L for rendering 20mm thick Ready Mix plaster (1:4) in walls externally with 3% water proofing compound @ wt of cement including necessary scaffolding and safety measures complete all as specified and directed by Engr-in-charge.(WPC will be measured and paid seperately).Note:- (i) The plaster should be carried out in two layer first layer should be 15mm finished with brush mark and the second layer of 5mm thick plaster.(ii) After finishing the first layer it should be curing for next 14 days before applying the second layer of plaster and applying second layer of plaster same curing process will be follow as intial one. |
| 18 | Supply only integral water proofing compound complete all as specified and directed by Engr in Charge |
| 19 | M&L for preparing newly plastered wall surfaces and applying two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/ltr, of approved manufacture, of required shade and colour complete, as per manufacturers specification complete all as specified and directed by Engr-in-charge. |
| 20 | M&L for preparing newly plastered wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engr-in-Charge. |
| 21 | M&L for preparing old decorated internal plastered wall surfaces and applying two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and complete all as specified and as directed by Engr-in-Charge. |
| 22 | M&L for preparing old decorated external plastered wall surfaces and applying Two or more coats of 100% Premium weathe coat/Rain coat paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engr-in-Charge. |
| 23 | M&L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. |
| 24 | M&L for preparing old surfaces of brick, stone, concrete, asbestos cement or plaster surfaces or interlock paver blocks surfaces etc any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. |
| 25 | M&L for painting floors with approved ready-mixed floor paint of approved brand and colour on concrete/cement plastered floors, including surface preparation by cleaning and removing all dust, dirt and loose material, and applying one coat of paint to produce a uniform finish, complete as directed by the Engineer-in-Charge. |
| 26 | Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified.Note: The place of disposal shall be find out by the contractor. |
| 27 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified. |
| 28 | M & L for PCC 1:3:6 type C-I using 20mm graded stone aggregate as in coping etc. and similar work including necessary formwork weathring slightly rounded or chamfered complete all as specified & directed |
| 29 | Demolition of RCC of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and separating, scraping and cleaning of reinforcement and removing debris outside MD land.Note: The place of disposal shall be find out by the contractor. |
| 30 | M&L for RCC 1:2:4(nominal mix) type C1 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs ,landings ,balconies canopies ,deck slabs and in shelves and the like complete all as specifie |
| 31 | M & L form work to the slab and beams for rough finished surfaces of concerte flat complete all as specifed and directed by Engineer-in-charge. |
| 32 | M&L for Reinforced cement concrete 1:2:4 (Nominal mix) type B-1 (using 20 mm graded stone aggregate) in Columns, pillars, piers, posts and struts etc complete all as specifed and directed by Engineer-in-charge. |
| 33 | M&L for formwork to square/rectangular sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engr in Charge |
| 34 | M&L for Reinforced cement concrete 1:2:4 (Nominal mix) type B-1 (using 20 mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specifed and directed by Engineer-in-charge. |
| 35 | M&L for TMT bars (CRS) 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips complete all as specified.. |
| 36 | M&L for TMT bars (CRS) 6mm to 10mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips complete all as specified.. |
| 37 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified. |
| 38 | M&L for rolled mild steel in framed work as in door or gate of angle or other section with gusset plates, rails, braces etc complete,drilled for fixing of steel sheeting or other covering. Doors/gates to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings( exclusive of steel sheating or other covering,running rails and guides) and hanging also fastening and fixing complete conforming to Fe-410-W Gde E-250 quality A. |
| 39 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified. |
| 40 | M&L for Rolled sections as in framing for cladding, glazing, fencing for vertical posts and the like fixed with angle cleats and connecting plates, etc complete all as specified and directed by Engr-in-charge. |
| 41 | Dismantling Posts or struts (wood, steel or RCC) any section ,including taking out embedded portion and making good disturbed ground post embedded in concrete complete all as specifed and directed by Engineer-in-charge. |
| 42 | Excavation in post holes (or similar holes) each n.exc. 0.5 cum getting out removing filling, in and ramming earth or broken mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance n.exc. 50m and making good surface in soft loose soil complete all as specifed and directed by Engineer-in-charge. |
| 43 | M&L for PCC 1:3:6 ,type C2 (using 40mm graded stone aggregate) , as in foundation of posts and struts complete all as specifed and directed by Engineer-in-charge. |
| 44 | S&F Mild steel work as in posts and struts in fencing, Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specifed and directed by Engineer-in-charge. |
| 45 | Dismantling of fencing wire mesh of any type and size complete all as specifed and directed by Engineer-in-charge. |
| 46 | S&F chain link fencing galvanised mild steel hot dipped (IS -2721) of 4 mm dia of mesh size 100X100 mm any size complete all as specifed and directed by Engineer-in-charge. |
| 47 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specifed and directed by Engineer-in-charge. Note- Each line wire to be measured. |
| 48 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specifed and directed by Engineer-in-charge. Note- Each line wire to be measured |
| 49 | S& F in repairs GI concertina coil fencing 600mm dia of short profile having corewire dia 2mm and pitch between barb 24mm and tape 0.5mm thick including cutting, welding, rebating etc. complete all as specified and directed |
| 50 | S&F 10mm dia MS round bar for fixing of chain link fencing with post complete all as specifed and directed by Engineer-in-charge. |
| 51 | M&L for preparation of new or previously untreated steel and iron surfaces of any description, not exc 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamle paint over a coat of Zinc chrome primer complete all as specifed and directed by Engineer-in-charge. |
| 52 | S&F in repair for Factory made WPC Railing combining 18 mm WPC board & 75x50 mm WPC frame thick 100 % solid WPC (Wood Polymer Composite) railing of required length and 2'-2.5 height, comprising of virgin PVC resing of K Value 58-60 (Suspension Grade) , Calcium carbonate and natural fibers (Wood Poweders/rice husk/Wheat husk) and Non toxic additives , made from single Extrusion process, WPC foam board with having minimum density 650 Kg cum and WPC frame with having minimum density 780 Kg/Cum having good screw holding capacity (screw withdrawal strength of 2000 N (Face) & 1100 N (Edge) minimum compressiv str of 50.2 N/mm2 , modulus of elasticity 850 N/mm2 and reistance of spread of flame of Class A category with property of being Termite/Borer free, water/moisture proof and fire retardant FPR WPC railihng WPC Jali to be fixed with WPC frame of size 75 x 50 m with necessary supporting length of verticle as well as horizontal. At wall frames to be fixed with 3\\" x 3\\" GI 'L' or SS Cleats to support vertically frame length complete all as per direction of Enginner in Charge, frames to be fixed with 3\\" x 3\\" GI 'L' or SS cleats to support vertically frame length complete all as er direction of Enginner in Charge. |
| 53 | M&L for preparation of new surfaces of any description over 10 cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified. |
| 54 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and dia of neck 11 to 15 mm complete all as specifed and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
TodayBid Submission Deadline
Online submission via eProcurement portal.
TodayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender