Tender For Special Repair To Road/Culverts Alongwith Road Furniture On Link Roads Inside Married Accn Enclaves And Peripheral Roads At Talbehat Mil Stn
Tender Value
36.42 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
24 days left
EMD
74000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lalitpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Road/Culverts Alongwith Road Furniture On Link Roads Inside Married Accn Enclaves And Peripheral Roads At Talbehat Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Repair to potholes not exceeding 1.0 Sqm each, any depth exceeding 30mm, including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc making good by applying tack coat at 5.0 Kg per 10 Sqm. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, blinded with 0.09 Cum of stone chippings, 6.3mm size and again will rammed (including supply or premixed macadam, binder & chippings) complete all as specified and as directed. |
| 2 | Scarifying or picking gravelled macadam or bituminous macadam surfaces, in area exc. 400 Sqm (depth exc 50mm and not exc 100mm deep) complete all as specified and as directed |
| 3 | M&L rolling and consolidating road formation surfaces in cutting with 8 to 12 tonne power road roller including watering as necessary and filling in hollows and depressions to required gradient and camber complete all as specified and as directed |
| 4 | M&L for laying and compacting 150mm thick (compacted thickness) granular sub base course (GSB) grading as per Grade V as specified in table 900-1 of MoRTH specifications for Road and Bridge works, 2013, in a three layers over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag or combination thereof as per the grading required. The materials are mechanically mixed, spread and levelling on the subgrade by using motor grader of adequate capacity and rolling with vibratory roller of capacity 80-100 KN static weight for achieving required compaction density of atleast 98% of the maximum dry density and consolidating to required gradient and camber with finished surface tolerances as per table 900-1 of MoRTH specifications complete all as specified and as directed. |
| 5 | M&L for 150 mm thick (compacted thickness) WBM in two layers of 75 mm thick with coarse aggregate of grading 2 (63 to 40mm size) for first layer and of grading 3 (50 to 20 mm size) for second layer quartzite, flint stone, lime stone, sand stoneetc blinded with stone screeining type 'A' spread, rolled and consolidated to required gradient, camber, level, super elevation with 8 to 12 tonne power roller complete all as specified and as directed. |
| 6 | M&L for preparing unsurface WBM by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, unsurfaced water bound macadam applying evenly a priming/tack coat with bituminous primer (Paving bitumen VG-10) at 10 Kg per 10 sqm, using bitumenous primer by means of mechanical paver complete all as specified and as directed. |
| 7 | Material & Labour for laying premixed bituminous macadam (using binder not less than 4% by weight of total mix) rolled and compacted to required gradient and camber (consolidated thickness 50-75 mm) using VG-30 paving bitumen, complete all as specified and as directed. |
| 8 | M&L preparing of black top surface by brushing with wire brushes for removing caked mud etc. and sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to removed all loose dirts and for applying evenly a priming/tack coat with VG-10 bituminous primer at 5 Kg per 10 Sqm using paving bitumen over black top surface complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 9 | M&L preparing of black top surface by brushing with wire brushes for removing caked mud etc. and sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to removed all loose dirts and for applying evenly a priming/tack coat with VG-10 bituminous primer at 5 Kg per 10 Sqm using paving bitumen over black top surface complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender