Tender For 2/ E8 Tender Id-2026_Mes_786947_1Name Of Work: Addition/Alteration And Special Repairs To Bldg No P-145, P-146, P-147 & P-148 (Married Accommodation At Cera) At Ina Ezhimala
Tender Value
42.98 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
2 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 2/ E8 Tender Id-2026_Mes_786947_1Name Of Work: Addition/Alteration And Special Repairs To Bldg No P-145, P-146, P-147 & P-148 (Married Accommodation At Cera) At Ina Ezhimala
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Oct-2026 | BoQ Corrigendum | BOQ | 05-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling single layer of Mangalore pattern tiles including ridge in roofing, all as specified and as directed. |
| 2 | Dismantling plain or corrugated steel sheeting / galvalume sheets, any gauge, thickness as in roof covering including aluminium frame complete all as specified and as directed. |
| 3 | Dismantling wrought iron or mild steel of any description not otherwise provided for,all as specified and as directed. |
| 4 | Supply & fix Anodised aluminium frame for roofing tiles with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 5 | Material & labour, roof tiles Mangalore pattern interlocking at side joints, laid dry,all as specified and as directed. |
| 6 | Material & labour,ridge or hip tiles to suit Mangalore pattern or roofing tiles bedded and jointed in cement mortar 1:6 using water proffing compound,all as specified and as directed. |
| 7 | Material & labour for preparation of new MP roof tile surfaces by cleaning the tiles and applying two coats of antifungal paint over a coat of primer all as specified and as directed . |
| 8 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer all as specified and as directed. |
| 9 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer all as specified and as directed . |
| 10 | Supply & fix steel work in tubular trusses (tubular, angle, square and rectangular etc ) including erection shaped washer etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and as directed . |
| 11 | Erection and fixing only steel work in tubular trusses (tubular, angle, square and rectangular etc ) including shaped washer etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and as directed . |
| 12 | Material & labour Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed. |
| 13 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level), all as specified and as directed |
| 14 | Material & labour 50mm thick PCC 1:2:4, Type B-1 using 20mm crushed stone aggregate as in plinth protection and like finished even and smooth without using extra cement,all as specified and as directed. |
| 15 | Material & labour 25mm thick Cement concrete 1:2:4 Type B-0 using 12.5 mm graded stone aggregate.as in sub flooring rough finished surface complete all as specified and as directed. |
| 16 | Material & labour for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 all as specified and as directed. |
| 17 | Material & labour for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set with or without spacers and jointed in neat cement slurry and pointed in white or coloured cement /epoxy to match the shade including 20mm thick screed bed in CM 1:4 all as specified and as directed. |
| 18 | Material & labour for ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match of light shade including 15mm thick backing coat plaster in CM 1:4 all as specified and as directed. |
| 19 | Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish of the premises,all as specified and as directed. |
| 20 | Material & labour for Glazed ceramic coloured tiles 300 X 600 X 7 mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 all as specified and as directed. |
| 21 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 22 | Material & labour granite slab (of any type dark shade) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick screed bed of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite, all as specified and as directed. |
| 23 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, all as specified and as directed. |
| 24 | Supply & fix GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approximate 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (not exc. 1.2m length) of 0.5mm thickness having curled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, all as specified and as directed. |
| 25 | Supply & fix 4mm thick E-board , multipurpose, decorative type,for ceiling purpose complete all as specified and as directed. |
| 26 | Taking down Chowkhats or frames exc. 1.5 sq. m but not exc. 4 sq. m each, with shutters (without taking off shutters from the frames) ,all as specified and as directed. |
| 27 | Taking down Chowkhats or frames not exc. 1.5 sq. m each, with shutters (without taking off shutters from the frames),all as specified and as directed. |
| 28 | Mirror polishing on marble/granite/kota stone/stone work where ever required to give high gloss finish complete all as specified and directed. |
| 29 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.all as specified and directed. |
| 30 | Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified and as directed. |
| 31 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and as directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 32 | Supply and fixing factory made uPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and as directed . (Glass shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this accountshall be made Supply and fix Material only |
| 33 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 34 | Supply & fix Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane - 4mm thickness,all as specified and as directed. |
| 35 | Supply & fix aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples all as specified and as directed. |
| 36 | Supply & fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, all as specified and as directed. |
| 37 | Supply & fix SMP-Magma WPC Door Frame (90 mm x 45 mm) (Moulded) factory made 100% Solid WPC ( Wood Polymer Composite) Single Rebated made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed srews having minimum frame density of 850 kg/cbm & manufactured by \\"SMP-MAGMA “an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min 990 N), Minimum of being termite / borer dia and length, all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasteners shall be paid separately). Brand : SMP- MAGMA or Equivalent. |
| 38 | Supply & fix SMP-Magma WPC Door Frame (125 mm x 65 mm) (Moulded) factory made 100% Solid WPC ( Wood Polymer Composite) Double Rebated made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed srews having minimum frame density of 850 kg/cbm & manufactured by \\"SMP-MAGMA “an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min 990 N), Minimum of being termite / borer dia and length, all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasteners shall be paid separately). Brand : SMP- MAGMA or Equivalent. |
| 39 | Supply & fix Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 40 | Providing and fixing factory made wire mesh solid WPC (Wood Polymer Composite) door shutter (single/double) consisting of density density of 500 kg/cum, door to be with SS mosquito wire mesh and XTN aluminium mesh for additional strength and safety pourpose. the door should be water proof, termite proof, fire retardant, and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. fixing with butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed. |
| 41 | Supply & fix 150mm anodized aluminium barrel tower bolt of extruded section all as specified and as directed. |
| 42 | Supply & fix 100 mm stainless steel butt hinges complete all as specified and as directed. |
| 43 | Supply & fix 150mm extruded anodised aluminium alloy handles fabricated type all as specified and as directed. |
| 44 | Supply & fix floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised with hard drawn steel spring fixed to door, all as specified and as directed. |
| 45 | Material & labour for preparation of new or previously untreated wood based surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 46 | Supply & fix for door seal with aluminium top and bottom fiber brush for glazed ,skelten and panelled door to stop germs,mosquito,snake from outer side(for size n exc 1.2mtr) complete all as specified and as directed . |
| 47 | Supply & fix 300mm long ordinary MS rat tail rod pattern springs including roller plate complete all as specified and as directed. |
| 48 | Taking down cement or cement lime plaster of any description including raking out joints, hacking for key and scrubbing down with water all as specified and as directed. |
| 49 | Material & labour, 10mm thick rendering in CM 1:6 on wall surfaces finished even and smooth without using extra cement, complete all as specified and as directed. |
| 50 | Material & labour for rendering 10mm thick in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 51 | Material & labour, 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces with liquid water proofing compound, surface finished even and fair, complete all as specified and as directed. Note: water proofing compound shall be measured and paid separately |
| 52 | Intergral waterproofing compund supply only,all as specified and as directed. |
| 53 | Dismantling cabinets boarding, any description, fixed in any position with Screws including all fittings,all as specified and as directed. |
| 54 | Supply & fix 18 mm thick extruded polymer profile foam board made of 'U' PVC polyster resin of any colour and pattern and having density of 0.65 g/cc used as in kitchen cabinets/wardrobes/ shutter/ Drawers etc fixing with drywall screws in required and shape including finishing the edges/exposed surfaces with PVC/ Sunmica lipping complete all as specified and as directed . |
| 55 | Supply & fix PVC magnet catcher fixed with screws to wooden frames complete all as specified and as directed. |
| 56 | Supply & fix stainless steel telescopic channel drawers slides(length n exc 600mm) complete all as specified and as directed . |
| 57 | Supply & fix stainless steel closing hydraulic hinges for shutter complete all as specified and as directed . |
| 58 | Supply & fix 75mm long aluminium handles, cast type, anodised all as specified and as directed . |
| 59 | Supply & fix Harrison rails, mild steel, anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc, all as specified and as directed . |
| 60 | Supply & fix 32mm dia PVC flexible waste pipe for /WHB/sink all as specified and as directed . |
| 61 | Dismantling the ISI marked triple layer 100% food grade rotational moulded Polypropylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed in SSR Part I - Capacity 500 litres |
| 62 | Ball brass valves, high pressure, with polythene float and flynut (25mm)complete, screwed for iron pipe or brass ferrule and fixed in repairs,all as specified and as directed . |
| 63 | Demolition of cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work,all as specified and as directed . |
| 64 | Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3 ) using water proofing Compound,all as specified and as directed . |
| 65 | Material & labour for cement concrete 1:2:4 type B1 (20mm graded stone aggregate) as in roof kerb, rounded or chamfered on edges, complete all as specified and as directed . |
| 66 | Material & labour for cement concrete 1:2:4, type B1 (20mm graded stone aggregate) as in filling and mass concrete, roof slab padding preparatory to roof treatment, complete all as specified and as directed . |
| 67 | Material & labour for waterproofing treatment with the following specifications, all as specified and as directed . |
| 68 | Dr. Fixit Roofseal Select, High Performance Waterproof Coating for Roof Top Coat System, Surface Preparation, All loose and de-bonded concrete/ screed shall be removed and proper repairing to be carried with polymer modified mortar. Terrace water proofing: Clean the receiving roof surface with pressure water. All looseparticles, dirt & rub down to original hard surface. |
| 69 | Repair to screed cracks : Inspect for cracks over roof screed, roof wall junction, water drain inlets / outlets if any, and clean and moisten them. Crack’s width more than 0.5 mm having shrinkage crack up to 5mm width should be wide up to 5-6 mm with mechanical cutting machine and should be filled with PMM mortar admix with (volume) Dr. Fixit Pidicrete URP 10 % by weight of cement. Fill all larger cracks more than 5 mm with polyurethane flexible sealant Dr. Fixit PU Sealant. Through and through cracks on the slab must be identified visually or by ponding which are more than 1mm and are visible on the RCC ceiling as well on the screed top and having drip crack in square or U-groove manner up to minimum 6 mm size by mechanical cutter. Clean the groove with air blower to remove dust, dirt etc. Fill the cracks with Dr. Fixit PU Sealant after necessary cleaning. |
| 70 | Repairing loose screed : Breaking / removing loose roof screed after sound test hammering / Stagnant water due to undulation in the roof surface should be marked and repaired with PMM admix with (volume) Dr. Fixit Pidicrete URP 10 % by weight of cement in the ratio of 1:3. Matching as per existing screed / plaster thickness in patches, including cutting the patch in proper shape, raking out joints and application of bond coat before PMM treatment. |
| 71 | Waterproofing : Apply one coat of Dr. Fixit Prime seal primer dilute with water in the ratio 2:1 spreading at the rate of 8.0 – 10.0 / Sq.mt / Litre in the SSD condition. Apply 1st coat of Dr. Fixit Roof seal Select without dilution at the rate of 2 sq . mt per liter . Laying a 45 GSM Fiber glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 6-8 hours before applying the 2nd coat. Apply second coat of Dr. Fixit Roof seal Select with the same application coverage. Application direction of second coat should be perpendicular to that of the first coat. Check to see no void surface is left uncoated with second coat. Allow second coat to dry for 6-8 hours. Apply third coat of Dr. Fixit Roofseal Select at an application direction that is perpendicular to that of the second coat with same application coverage rate. Check to see no void surface is left untreated / uncoated. All coats should be applied in direction perpendicular to each other. Air cure the coating for 7 days. System comes with 10 years waterproofing warranty. For vertical surfaces and parapet walls should be enveloped & coated / painted with Dr. Fixit Raincoat Select Waterproof coating system. Note – Coating should be terminated below the drip mould on the vertical surface |
| 72 | Supply & fixing in repairs MS curtain rod made out of 25mm dia (outer dia) pipe having thickness 0.63mm,PVC coated and colour / Pattern over all dia 28 to 29mm including taking down existing curtain rod complete all as specified and as directed. |
| 73 | Supply & fixing plastic finial of 28 to 29mm bore decorated type of any colour /Patern best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and as directed. Make: Aerolux/MEC or VISTA |
| 74 | Supply & fixing mild steel prepainting bracket to hold the curtain rod and fixed to wall (concrete /brick masonary) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the distrubed surfaces complete all as specified and as directed. |
| 75 | Taking up or down steel tubing and connections, 25 or 32 mm bore including cleaning and removal to store all as specified and as directed. |
| 76 | Taking up or down steel tubing and connections, 20 mm bore including cleaning and removal to store,all as specified and as directed. |
| 77 | Supply & fix 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 78 | Supply & fix 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.. |
| 79 | Supply & fix 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 80 | Supply & fix 15mm bore chromium plated bib taps long body, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes including taking down of old items all as specified and as directed. |
| 81 | Supply & fix 15mm angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified and as directed. |
| 82 | Supply & fix 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed,all as specified and as directed. |
| 83 | Supply & fix 125mm size brass chromium plated shower rose,all as specified and as directed. |
| 84 | Supply & fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect all as specified and as directed. |
| 85 | Supply & fix 15mm bore stop valves chromium plated cast copper alloy (long shank, fancy type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes (concealed type) all as specified and as directed. |
| 86 | Supply & fix PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity,all as specified and as directed. |
| 87 | Supply & fix PVC connections 15mm size with PTMT nuts of length 450mm,all as specified and as directed. |
| 88 | Supply & fix in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,all as specified and as directed. |
| 89 | Supply & fix in repairs vitreous china, wash down water closet (EWC), coloured with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed. |
| 90 | Supply & fix in repairs vitreous China wash basin,coloured (flat back) 550x400mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets all as specified and as directed. |
| 91 | Supply & fix in repairs 20mm dia,D type, 60cm long cast copper alloy, chromium plated towel rail, complete all as specified and as directed. |
| 92 | Supply & fix in repairs chromium plated soap tray fixed with CP brass screws,all as specified and as directed. |
| 93 | Supply & fix in repairs bevelled edge mirror 600x450mm, selected quality glass mounted on 6mm thick PVC/AC building board/commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers all as specified and as directed. |
| 94 | Supply & fix Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed,all as specified and as directed. |
| 95 | Supply & fix Brass CP mixer(wall mixer,basin mixer,sink mixer) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 96 | Supply & fix in repairs plate rack made of stainless steel 1mm thick kitchen ; including fixing to wall overall size 766mm x 254mm x 706mm . Complete all as specified and directed. |
| 97 | Supply & fix stainless steel 06 peg cloth rail hook all as all as specified and as directed. |
| 98 | Demolition of brick work, PCC block or stone masonry built in cement mortar,all as specified and as directed. |
| 99 | Material & labour for precast cement concrete block masonry with solid blocks Type C1, (1:3:6) (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6,all as specified and as directed. |
| 100 | Material & labour for Laterite stone masonry walling of rubble, coursed, well bonded bedded in cement mortar 1:6 complete all as specified and as directed. |
| 101 | Material & labour for preparation of old treated surfaces and applying one coat of white wash on ceiling all as specified and as directed. |
| 102 | Material & labour for preparation of old treated celling surfaces and applying one coat of oil emulsion distemper all as specified and as directed. |
| 103 | Material & labour for preparation of old treated surfaces and applying one coat of acrylic emulsion paint having VOC content less then 50 gms/lters (interior grade) on wall all as specified and as directed. |
| 104 | Material & labour for complete removal of existing treatment and applying two coats of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer over putty as required all as specified and as directed. |
| 105 | Material & labour for preparation of new plaster surface and applying two coats of acrylic emulsion paint having VOC content less then 50 gms/lters (interior grade) on wall over a coat of acrylic primer over putty as required all as specified and as directed. |
| 106 | Material & labour for preparation of old painted surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces all as specified and as directed. |
| 107 | Material & labour preparation of old painted surfaces exc 10 cm width or girth and applying one coat of Aluminium Paint on steel/iron surfaces all as specified and as directed. |
| 108 | Removing Shrubs, Vegitation, roots etc.. from External wall surfaces , by dismantling Brick work , RCC or taking down plastering as the case may be, including dismantling SWR pipes, OH PVC service tanks etcc. and refixing the same in original position and making good the surface dismantledall as specified and as directed by EIC. (Area to be dismantled exc 1 Sqm and no Exc 3 Sqm) |
| 109 | Material & Labour for applying Two coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal/algae resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, coverage @ 6 to 7 Sqm / ltr (two coats) over and including priming coat of exterior primer applied @ 11 Sqm/ltr (for one coat) including preparation of new plaster surface,all as specified and as directed. |
| 110 | Material & Labour for applying Two coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal/algae resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, coverage @ 6 to 7 Sqm / ltr (two coats) over and including priming coat of exterior primer applied @ 11 Sqm/ltr (for one coat) over old painted surfaces including complete removal of existing treatment/ preparation of existing surfaces as per site condition and cleaning the surfaces with bio wash to receive new treatment,all as specified and as directed. |
| 111 | Dismantling CI soil waste pipe upto 100mm dia including all joints and branch pieces jointed in cement mortar complete all as specified and as directed. |
| 112 | Supply & fix, 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 113 | Supply & fix, 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 114 | Supply & fix, 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement concrete complete all as specified and as directed. |
| 115 | Supply & fix, PVC (SWR) bends 110mm dia any radius complete all as specified and directed. |
| 116 | Supply & fix, PVC (SWR) bends 75mm dia any radius complete all as specified and as directed. |
| 117 | Supply & fix, 110 mm PVC (SWR) Branch pieces single (equal or unequal)(double Y) with parallel branches complete all as specified and as directed. |
| 118 | All as per srl item No 114 here-in-before but single Y,all as specified and as directed. |
| 119 | Supply & fix, 75 mm PVC (SWR) Branch pieces single (equal or unequal) with parallel branches complete all as specified and as directed. |
| 120 | Supply & fix, 110 mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and as directed. |
| 121 | Supply & fix, 110 mm PVC (SWR) vent cowl complete all as specified and as directed. |
| 122 | Supply & fix, 75mm mm PVC (SWR) vent cowl complete all as specified and as directed. |
| 123 | Supply & fix in repairs PVC (SWR) 'S' Trap for 110 mm dia of pipe all as specified and as directed. |
| 124 | Material & labour PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement,all as specified and as directed. |
| 125 | Material & Labour for PCC 1:2:4, Type B2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete in any situations all as specified and as directed |
| 126 | Material & Labour for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 127 | Material & Labour for PCC 1:3:6, Type C1 (using 20 mm graded aggregate) as in surface channels and drains complete all as specified and as directed. |
| 128 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,all as specified and as directed. |
| 129 | Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,all as specified and as directed. |
| 130 | Supply & fix Structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 131 | Taking down carefully old and unserviceable aluminium/copper point wiring for light/fan/socket or power complete including fixtures and fittings such as switches, ceiling roses, pendants, reglators, sockets, light fittings, distribution boards and MCB's etc. making good disturbed surface of walls. floors etc. to match with the existing surface complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 132 | Taking down carefully old and unserviceable aluminium/copper point wiring for light/fan/socket or power complete including fixtures and fittings such as switches, ceiling roses, pendants, reglators, sockets, light fittings, distribution boards and MCB's etc. making good disturbed surface of walls. floors etc. to match with the existing surface complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender