Tender For Repair To Drain, Culvert, Compound Wall, Fencing And Gate Etc At Academic Block At Nda Khadakwasla.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
16 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Drain, Culvert, Compound Wall, Fencing And Gate Etc At Academic Block At Nda Khadakwasla.
BOQ
| Sl. No. | Item Description |
| 1 | Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superficial area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to disturbed portion and applying two coats of cement base paint / weather coat to match the existing surface upto fourth floor complete all as specified and directed. |
| 2 | M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 3 | M&L for Plain Cement Concrete Type B2 1:2:4 (using 40 mm graded stone aggregate) in surface channels and drains including necessary formwork complete all as specified and directed. |
| 4 | M&L cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. |
| 5 | M&L for precast cement concrete block masonry with solid blocks 1:3:6 type C-1 (using 20 mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed. |
| 6 | M&L Precast Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and directed.(Note:-Reinforcement shall be measured and paid separately) |
| 7 | M&L for Precast Reinforced Cement concrete 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) in 35 mm thick (measured solid) Jallies or louvers including all mouldings set jointed in CM 1:4 but excluding frame complete all as specified and directed. |
| 8 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 9 | M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 10 | S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 11 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 12 | M&L for Mild steel screw bolts diameter of neck 5 to 10 mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 5 cm long complete all as specified and directed. |
| 13 | M&L for 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 14 | M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 15 | M&L for Mild TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 16 | S & F Rolled Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and directed. |
| 17 | Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire complete all as specified and directed. |
| 18 | S&F in repairs galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured) complete all as specified and directed. |
| 19 | Supply only chain link MS galvanized fencing, conforming to IS:2721:2003 of any size or type including line wires of 3.15mm dia, straining bolts etc including provision of binding wire complete all as specified and directed. |
| 20 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws or J/ L type hooks complete all as specified and directed. |
| 21 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. |
| 22 | M&L in replacement of LED kerb stone of height 250-300mm,made of high grade HDPE material,shock resistance ,power 36v with combination of Red/White/Blue /Yellow colour for installation embedded with cement concrete 1:2:4 alongwith locking keys complete all as specified and directed. |
| 23 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 24 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 25 | M & L for painting the new wall surface complete all as specified and directed as follows :- (a) Surface Preparation- Preparation of newly plastered or previously untreated surfaces of walls (b) Putty application- NIL (c) Priming surface- Applying one coat of cement base primer (d) Painting- Applying two coats of cement base paint. |
| 26 | Raking out joints/ pointing to squared rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and directed. |
| 27 | M&L for flush pointing to random or squared rubble masonry, coursed or uncoursed brought upto courses in cement mortar 1:4 complete all as specified and directed. |
| 28 | M & L for painting the new steel surface complete all as specified and directed as follows :- (a) Surface preparation- Preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- Applying one coat of red oxide primer (c) Painting- Applying two coats of synthetic enamel paint. |
| 29 | M & L for PCC 1:3:6 type c2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore pipe complete all as specified and directed. |
| 30 | M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and direct |
| 31 | M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 300 mm bore complete all as specified and direct |
| 32 | M&L for lowering & laying in trench of Reinforced Cement Concrete pipes of 150mm bore, class NP3,spigot and socket ended pipes (IS : 458-2003 marked) with and including rollon rubber ring gasket (Conforming to IS : 5382-1967 Type -I, aligning & jointing complete all as specified and directed |
| 33 | M&L for lowering & laying in trench of Reinforced Cement Concrete pipes of 200mm bore, class NP3,spigot and socket ended pipes (IS : 458-2003 marked) with and including rollon rubber ring gasket (Conforming to IS : 5382-1967 Type -I, aligning & jointing complete all as specified and directed |
| 34 | M&L for lowering & laying in trench of Reinforced Cement Concrete pipes of 300mm bore, class NP3,spigot and socket ended pipes (IS : 458-2003 marked) with and including rollon rubber ring gasket (Conforming to IS : 5382-1967 Type -I, aligning & jointing complete all as specified and directed |
| 35 | S&F in repairs, SFRC (Steel Fibre Reinforced Concrete) Manhole cover slabs of size 510mm x 960mm x 100mm thick with frame as per IS 12592-2002, set in cement mortar 1:4 complete all as specified and directed Notes-(i) Contractor will provide manufacturer test certificate of SFRC cover & frame |
| 36 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 37 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided all as specified and directed. |
| 38 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 40 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 41 | Dismantling of security fencing any type (chain link, barbered wire, GI mesh etc) complete all as specified and directed. |
| 42 | Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete, masonry etc and making good the disturbed ground complete all as specified and directed. |
| 43 | Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar including bed concrete internal dia of pipe 150mm and removal of demolished material out of MoD land complete all as specified and directed |
| 44 | Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar including bed concrete internal dia of pipe 200mm and removal of demolished material out of MoD land complete all as specified and directed |
| 45 | Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar including bed concrete internal dia of pipe 300mm and removal of demolished material out of MoD land complete all as specified and directed |
| 46 | M&L for road cutting and repairing to disturbed road with 100 mm thick PCC 1:2:4 type B2 (using 20 mm graded stone aggregate) over and including 150mm rammed hardcore of broken stone of gauze n.exc 63mm over rammed earth etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender