Tender For Cleaning/Desludging And Repairs Of Sewage Line, Manholes, Cover Slabs Etc In Chetak Area Under Ge (Af) Adm Area At Af Stn Gwalior
Tender Value
15 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
8 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cleaning/Desludging And Repairs Of Sewage Line, Manholes, Cover Slabs Etc In Chetak Area Under Ge (Af) Adm Area At Af Stn Gwalior
BOQ
| Sl. No. | Item Description |
| 1 | Attending day to day complaints for cleaning & clearing of localised blockage from floor/Nahani trp, soil waste, WC, chocked rain water pipe etc upto and including Ist manhole and removing sludge water/waste upto 50 meter distance and burrying the same in pit complete all as specified and directed.Note:- (i) The unit rates quoted in above items shall deemed to be included for removing of solids, liquids and sludge etc or any description from manholes.(ii) SMQ Area under AGE B/R-I of GE (AF) Adm Area Gwalior.(iii) Indls will report at complaint cell of AGE B/R-I of GE (AF) Adm Area Gwalior alongwith a supervisor deputed by contractor to JE (Civ) concerned daily(Except Sunday/Holiday)(iv) Complaint should be done within 24hrs. If not done within 24 hrs, penalty of Rs. 200 /day/complaint will be levied to the contractor and will be recovered from the contractor's due. |
| 2 | Cleaning of underground sewage line including Manholes of any type & size and line of dia 150mm and depth not exc 1.5m making all in working and running condition by removal of blockages of any kind in manholes or sewage lines by means of dewatering, suction, jetting and mechanical rodding with vibration /drilling concept i.e trolley mounted motorized sewer cleaning machine including desluding, descaling & dechoking of line wherever required, flushing the entire stretch with combined high pressure water jetting cum suction (vacuum) type machine suitably fabricated on HCV having facilities of hydraulic application through high pressure thermoplastic, making the stretch clean, functional and removal /deposition of sludge inclusive of solids of any type & sludge water to a distance exceeding 1.5KM but not exc 5KM and covering the entire sludge and solids with local earth complete.Note :- The rates quoted shall deemed to inclusive for using Jet Machine comprising of following specifications :- Sewer suction cum Jet machine of Capacity 5000 Litres mounted / hauled with appropriate Vehicle, Capacity for Sludge / sewer > 1500 Ltrs and capacity of water > 2500 ltrs, Suction system with minimum delivery of 600 Cum / Hour, Vacuum 92%, Suction pipe dia - 100mm, Suction length - 7m, Length of Suction hose - 15m, Minimum pressure 2 Bar, Jetting system with min delivery capacity of 225 LPM and Pressure 130 Bar, Jetting hose and hose reel (alongwith nozzle) of minimum length 30m, dia 25mm, nozzle size as required and working pressure 2200PSI complete all as specified and directed. |
| 3 | Cleaning of underground sewage line including Manholes of any type and size and line exc 150mm & n exc 300mm dia of pipe including manhole upto 3m depth by means of removing silts, sludgem pabbles, stones, bricks, bats etc all in working and running condition involving removal of blockages of any kind in man holes or sewage lines by any means i..e mechanical or manual including rodding with vibration/ drilling concept ie trolly mounted motorized sewer cleaning machine including desluding descalling & dechoking of the wherever required, flushing the entire stretch with combined high pressure water jetting com suction (vaccume) type machine suitably fabricated of HCN having facilities of hydraulic application through high pressure thermoplastic, making the stretch clean, functional and removal / deposition of sludge inclusive of solids of any type & sludge water to a distance exceeing to a distance exceeding 1.5KM but not exc 5KM and covering the entire sludge and solids with local earth complete all as specified and directed. |
| 4 | Cleaning of manholes of any size but depth not exc 1.5 M deep mechanically or manually by taking of sludge/any deletrious material from the existing manhole and removing the sludge to a distance beyond 2.00 KM from the habitation in sealed container and depositing the same complete all as specified and directed. |
| 5 | All as per above Item No. 4 but depth of man hole exc. 1.5 mtr and n. exc. 3 mtr deep. |
| 6 | M&L for Punchering existing RCC /SGSW pipe line of any dia and at any places between manholes for cleaning blockage in pipes including necessary exavation , returning , filling in and removal of soil and making good punchered area with CM 1:1, including cutting/clearing away grass vegetation , saplings, shrubs, brushwood, undergrowth, roots, along pipe lines both sides upto a distance 2m complete all as specified and directed. |
| 7 | Demolition of brick work built in cement mortar and including all quoins, arches, pillars etc. complete all as specified and directed. |
| 8 | M&L brick work with sub class ‘B’ old size bricks straight or curved o plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 9 | All as per above Item No. 8 here-in-before but except bricks. Note:- Old serviceable bricks retrieved from serial Item no 7 here-in-before shall be used under this item. |
| 10 | Taking down of cement plaster inculding wall finishes in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. complete all as specified and directed. |
| 11 | M&L 15mm thick rendering in CM 1:4 on fair faces of bricks, finished even & smooth without using extra cement with and including using WPC etc, complete all as specified and directed. |
| 12 | Supply only water proofing compound etc complete all as specified and directed. |
| 13 | M&L preparation of newly plastered surface of wall and applying three coats of white wash to wall complete all as specified and directed. |
| 14 | M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching ,kerbs, bedblocks and like etc complete all as specified and directed. |
| 15 | M&L PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) in drains and surface channels and finishing complete all as specified and directed. |
| 16 | Extra for forming fair finished drain or channel 30cm inner girth in cement concret, using extra cement, including forms, moulds, initred/stopped ends complete all as specified and directed. |
| 17 | Cutting of trees' roots penetrated into manholes /sewage line /trap/drain pipe etc of any girth and at any depth (upto 1.5 mtr) /height (upto 3rd floor) including application of hot bitumen to arrest sprouting and filling up the gap and making good the disturbed portion complete all as specified and directed. |
| 18 | Demolition of PCC (un-reinforced) of any description and in any position not exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 19 | M&L for plain cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling & mass concrete complete all as specified and directed. |
| 20 | Excavation in trenches in sof/loose soil n exc 1.5 M wide & n exc 1.5 M in depth as in and getting out in soft/loose soil for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan complete all as specified and directed. |
| 21 | Excavation in trenches n exc 1.5 M wide and exc 1.5 M deep but n exc 3 M deep and getting out in soft/loose soil for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan complete all as specified and directed. |
| 22 | Returning, filling in including spreading leveling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed. |
| 23 | Removing excavated material to a distance exc 500 m but n exc 1.50 Km and depositing where directed at a level n exc 1.50 Km above starting point complete all as specified and directed. |
| 24 | M&L for cutting hole into existing manholes/Septic tank for connecting new drains pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150mm bore pipe complete all as specified and directed. |
| 25 | S&F in repair factory made (SFRC) steel fibre reinforced cement concrete round manhole cover (conforming to IS:12592) as required thickness not less than 80mm for medium duty and dia of manhole cover not less than 630mm dia, edge of manhole cover locked with 1mm thick MS sheet complete all as specified and directed. |
| 26 | S&F in repair factory made (SFRC) steel fibre reinforced cement concrete manhole cover (conforming to IS:12592) as required thickness not less than 80mm of size 1200mm x 450mm, edge of manhole cover to be locked with 1mm thick MS sheet complete all as specified and directed. |
| 27 | S&F in repair factory made (SFRC) steel fibre reinforced cement concrete manhole cover (conforming to IS:12592) as required thickness not less than 80mm of size 600mm x 600mm, edge of manhole cover to be locked with 1mm thick MS sheet complete all as specified and directed. |
| 28 | Demolition and breaking up 150 mm bore drain pipes, soil , waste and pipes etc (RCC/ SWG/CI/PVC etc) of any description in trenches or floors, including connections and fittings complete all as specified and directed. |
| 29 | Demolition and breaking up 200 mm bore drain pipes, soil , waste and pipes etc (RCC/ SWG/CI/PVC etc) of any description in trenches or floors, including connections and fittings complete all as specified and directed. |
| 30 | S&F 200mm bore DWC (Double Wall Corrugated) HDPE pipe laid and jointed in trenches complete all as specified and directed. |
| 31 | S&F 150mm bore DWC (Double Wall Corrugated) HDPE pipe laid and jointed in trenches complete all as specified and directed. |
| 32 | M&L concrete bed of PCC 1:4:8 type C2 (using 40 mm graded stone aggregate) for drain pipes bedding & hunching against the sides complete after pipes are laid, jointed and tested complete all as specified and directed. |
| 33 | 150mm |
| 34 | 200mm |
| 35 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 36 | S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 37 | M&L two coats of synthetic enamelled paint over and including a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth complete all as specified and directed. |
| 38 | Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10 cm long and dia of bolt etc. complete all as specified and directed. |
| 39 | Supply only galvanised chain link fencing of size or type complete all as specified and directed. Note: Weight of chain link fencing shall be ascertained through the BOO. |
| 40 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire including dismantling fencing wire mesh/ barbed wire, any type, complete all as specified and directed. |
| 41 | M&L for Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed. Note: Punned/consolidated thickness shall be measured and paid. |
| 42 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled with fine sand and broomed etc complete all as specified and directed.Note : Sand filling under interlocking paver shall be measeured and paid saperately. |
| 43 | Dismantling existing interlocking pavers block of any description, size and pattern and refixing the same in any location for proper matching with existing surface after carrying out the necessary repair to the under layer complete all as specified and directed. Note : Sand cushioning will be measured separetely. |
| 44 | M&L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 45 | Cleaning of existing drain of any size or shape by removing sludge /silt/ earth (liquid, semisolid & solid) completely and removing the rubbish to a distance exc 250 m but not exc 500 m and deposited where directed, complete all as specified and directed. |
| 46 | Petty repairs to existing damaged stainless steel railing of any dia and size by buffing, welding, fitting the same with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangements complete all as specified and directed. Note : Stainless Steel Railing of size 3.00X1.00 mtr will be measured as one job. |
| 47 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 48 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 49 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender