Tender For Provision Of Fireproof False Ceiling Of Edpw Of Afcao And Fireproof Glass Partition In Standby Server Room At Camero Mt Section
Tender Value
43.37 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
19 days left
EMD
86740
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Fireproof False Ceiling Of Edpw Of Afcao And Fireproof Glass Partition In Standby Server Room At Camero Mt Section
BOQ
| Sl. No. | Item Description |
| 1 | S&F false ceiling with Semi perforated 12mm thick acoustical false ceiling, (fire retardant and sound absorbent) micro regular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595mmx595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 475 (Part 4) -1970 and light code description unit rate No 429 Sub Head : 26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per sqm including both sides) comprising of maint -T runners of size 15x32mm of length 300mm, cross -T of size 15mmx32mm of length 600mm to form grid module of size 600mmx600mm, suspended from ceiling using galvanised mild steel items (galvanising @80 grams per sqmm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-Shape level adjuster of size 85mmx25mmx2mm. Galvanised iron perimeter wall angle of size 24mmx24mmx0.40mm of length 3000mm to be fixed on perimeter wall /partition with the help of plastic rawl plugs at 450mm centre to canter and 40mm long dry wall screws including dismantling complete all as specified and directed. |
| 2 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 3 | M&L for rendering CM (1:6) 10 mm thick on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to four storey height bldg in and removing the debries outside the MOD land complete all as specified and directed. |
| 4 | M & L rendering 5mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement etc built in cement mortar and removing the debries outside the MOD land complete all as specified and directed. |
| 5 | M&L for preparation of new plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of primer incl 1 mm thick elastomeric wall care putty on walls up to four storey height building complete and specified and as directed. |
| 6 | M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty, up to four storey height building complete all as specified and directed. |
| 7 | M&L preparation of new plastered or unplastered surface and applying three coats of white wash on ceiling up to four storey height building complete and all as specified and directed. |
| 8 | M & L preparation of old plastered surface and applying two coats of white wash on ceiling up to four storey height buildingcomplete and all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.complete all as specified and directed. |
| 10 | M&L Glazed ceramic coloured tiles in vertical surface 350mmX 450mmX 7-8 /300mmx600mmx7-9 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl back plaster 10 mm thick in cm 1:4 complete all as specified and directed. |
| 11 | M&L Virified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) omplete all as specified and directed. |
| 12 | M &L for PVC profile for wall panelling colour / shade as approved size 250mm wide, 06 mm over all thickness fixed with screw to mild steel square ( size 20mmx 20mmx 1mm thick) tubler frame work including corner bedding one coat of red oxide primer, fixed to walls and including dismantling complete all as specified and directed. |
| 13 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm and not n.exc 4.0 sqm (including make good with CM 1:4 and hold fast) complete all as specified and directed. |
| 14 | Supply and fixing factory made uPVC white colour casement (openable.)door made of extruded profile with wall thickness of 2.3mm (+/- 0.2mm). Door profile with hollow section with multi chamber, frame(67mmx64mm). sash (65mmx108mm). T profile (One vertical length in between two shutters) (60mmx71mm)Glazing bead corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket + -0.2 mm thick galvanised steel frame (28mmx21.5mrn) sash (31mmx27mm) 'T' profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastners. Hardware: [ casement door handle both side made of zinc alloyed (while powder coated) Corner strikers: Cyilnder. Door transmission gear made of mild steel with multi point locking system with strikes, 3D hinges of zinc alloyed (white powder) and 5.5 mm thick glazing with selected quality glass. The unit rate quoated by contractor includes cost of glass and includes all and includes all other connected accessories & making good with which is required in PCC/RCC/plaster. Net opening will be measured for payment purpose (A) Area exc. 2.00 sqm each (b) uPVC frame, sash and mullion extruded profiles, minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specificed and directed. |
| 15 | Supply and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cutand fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note : The unit rate quoated by contractor include cost of glass and includes all other connected accessories like film or tinted glass. Net opening will be meausered for payment purpose) (A) Area n.exc. 2.00 Sqm each all as specified and directed. |
| 16 | Dismantling and taking down of inservicable / serviceable of UL/EN Listed Intelligent Addressable Muliticriteria Type Detector having twin LED’s for 360 degree viewing angle & hard Addressable having rotary decade addresss which is from 01-99. LED on the detector shall blink each time the sensor is scanned by the FACP. If the FACP determines the sensor is in alarm, the FACP will command the sensor LED to remain on to indicate the same. Each Sensor will be capable of being tested for alarm via command from the FACP. Each sensor shall respond to FACPs can with the Information about its type for identification all as specified and directed. |
| 17 | Refixing of inservicable / serviceable of UL/EN Listed Intelligent Addressable Muliticriteria Type Detector having twin LED’s for 360 degree viewing angle & hard Addressable having rotary decade address which is from 01-99. LED on the detector shall blink each time the sensor is scanned by the FACP. If the FACP determines the sensor is in alarm, the FACP will command the sensor LED to remain on to indicate the same. Each Sensor will be capable of being tested for alarm via command from the FACP. Each sensor shall respond to FACPs can with the Information about its type for identification all as specified and directed. |
| 18 | Supply, Installation,Testing, Commissioning and replacement of UL/EN Listed Intelligent Addressable Muliticriteria Type Detector having twin LED’s for 360 degree viewing angle & hard Addressable having rotary decade addresss which is from 01-99. LED on the detector shall blink each time the sensor is scanned by the FACP. If the FACP determines the sensor is in alarm, the FACP will command the sensor LED to remain on to indicate the same. Each Sensor will be capable of being tested for alarm via command from the FACP. Each sensor shall respond to FACPs can with the Information about its type for identification all as specified and directed . |
| 19 | Taking down of 2 core, 1.5 sq. mm. stranded copper conductor, PVC insulated PVC sheathed,aluminium myler tape shielded FRLS wire in draw through existing conduit complete all as specified and directed . |
| 20 | Supplying, drawing, connecting, testing & commissioning of 2 core, 1.5 sq. mm. stranded copper conductor, PVC insulated PVC sheathed, aluminium myler tape shielded FRLS wire in draw through existing conduit complete all as specified and directed. |
| 21 | Supply,Installation,Testing & Commissioning of UL/EN Listed Fault Isolator Module. This unit shall be placed on the loop preferably after every 20–30 devices and shall be able to isolate electrical short circuit in the wiring. All the other detectors shall remain functional because of the Class A wiring of the loop. The isolator shall not utilize an address and shall be built into the detector base wherever required all as specified and directed. |
| 22 | Supply, Installation, Testing & Commissioning of Intelligent Analog Addressable Type Manual Call Point having Surface or flush mounting glass break type having Rotary Decade Switces for Addressing from 01-99 complete with Back Box for Mounting Complete as required conforming to BS5839 Standard sand Duly Approved by EN54 /LPCB /VDS /UL/ BSA complete all as specified and directed. |
| 23 | Supply, Installation, Testing, Commissioning and Replacement of Remote Response Indicator for above false ceiling detectors & detectors installed inside cabins Response indicators with all accessories shall be as per technical specification complete all as specified and directed. |
| 24 | Supply,Installation,Testing & Commissioning of UL/EN Listed Intelligent addressable Output module having facility to activate AHU, Lifts etc.having option of RAIL or Surface Mounting with Tri Color LED status Indicator with Built in Short Circuit Isolators having Visible Rotary Decade Address Switches from 01-99 complete as required as per specification complete all as specified and as directed. |
| 25 | Supply,Installation,Testing & Commissioning of UL/EN Listed Intelligent addressable Input module for monitoring purpose having option of RAIL or Surface Mounting withTri Color LED status Indicator with Built in Short Circuit Isolators having Visible Rotary Decade Address Switches from 01-99 dully approved to GEAGE1-082 conforming to BS5839 Standards and Duly Approved by EN54/LPCB/VDS/UL/BSA complete all as specified and directed. |
| 26 | Supply, Installation, Testing & Commissioning of UL/EN Listed loop powered Sounder CUM Strobe complete as required as per specification Duly Approved by EN54/LPCB/VDS/UL/BSA complete all as specified and directed by Engineer-in-Charge NOTE: NO additional power supply and control module shall be required to trigger the sounders complete all as specified and directed. |
| 27 | Supply and laying of 25 mm Dia rigid steel conduit fixing on wall/roof/ceiling etc including concealed in wall and securing with proper saddle and making good disturbed surface and well finishing (For Fire Detection) all accessories complete all as specified and directed. |
| 28 | Taking down carefully and refixing of copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, ceiling lights, sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, false ceiling, et complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender