Tender For Renovation Of Repair Of Bhatara Mohalla Dharamshala And Shri Ram Mandir Dharamshala Est Cost Rs. 11.15 Lacs
Tender Value
11.15 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
6 days left
EMD
22300
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Repair Of Bhatara Mohalla Dharamshala And Shri Ram Mandir Dharamshala Est Cost Rs. 11.15 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling concrete Cement concrete plain1:2:4 mix |
| 2 | Cement concrete 1:8:16 With stone aggregates 40mm gauge mixingbymechanicalmeansusingconcretemixer volumetric type |
| 3 | 12.5 mm thick cement plaster 1:4 |
| 4 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth |
| 5 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Glossfinish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by themanufacture of approved make in all colours,shades except burgundy, bottle green, black ofsize 600 x 300 mm as approved byEngineer-in-Charge in skirting, risers of stepsand dados over 12 mm thick bed of cementMortar 1:4 (1 cement: 4 fine sand) andjointing with grey cement slurry @ 3.3kg persqm including pointing in white cement mixedwith pigment of matching shade complete |
| 6 | Providing and laying Polished Granite stone 18 mm thick in flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 7 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), complete. (Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make an ideal choice for high traffic zones.)Size 600x600 mm |
| 8 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 9 | Paintingtwo or more coats excluing priming coat with synthetic enamel paint in all shades on wood work metallic or plastered, concrete surface to give an even shade |
| 10 | Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 includinggrouti |
| 11 | Providing and fixing mineral fibre false ceiling tiles at height upto 4 mtr of size 595x595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m.K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shaped level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular edged mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595x595 mm |
| 12 | RECESSED PVC CONDUIT PIPE WIRINGSYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick withBrass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module)100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp.Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), SteelHooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\"deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including thecost of above material, cutting and filling up ofchases (with finishing the surface):-Wiring fan point (Without fan box) |
| 13 | Wiring 6Amp. wall socket point |
| 14 | Wiring light point |
| 15 | P/L 20W LED TUBE LIGHT |
| 16 | P/I CELEING FAN 48'' |
| 17 | P/Installation 1.5 TON SPLIT AC with 5KVA Stabilizer |
| 18 | LOADING AND UNLOADING By Mechanical Means stone(buildingorpitching)Sand, Earth, FlyAsh, Bajri, Shingle, Spalls, Brickbats, Brickballast and Stone metal |
| 19 | Earth,Surkhi, Sand, Earth, Fly Ash, Bajri,Ballast, Stoneboulders, Kankar andbuildingrubbish, Earth. 5.0 km |
| 20 | contigency Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender