Tender For Amrut-2.0 - Harippad Muncipality-Uwss To Harippad -Drilling Tube Well, Construction Of Temporary Pump House ,Laying Pumping Main,Commissioning Of New Tube Well And Supply & Erection Of Pump Set Near Tagore Central School In Ward 24 And Nea
Tender Value
25.77 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
7 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alappuzha → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Amrut-2.0 - Harippad Muncipality-Uwss To Harippad -Drilling Tube Well, Construction Of Temporary Pump House ,Laying Pumping Main,Commissioning Of New Tube Well And Supply & Erection Of Pump Set Near Tagore Central School In Ward 24 And Near Shishuvihar - Anganwady No.26 In Ward 8 Of Harippad Munciplality-Pipeline Work
BOQ
| Sl. No. | Item Description |
| 1 | APPENDIX A - PART 1 :- CIVIL WORK - CONSTRUCTION OF PUMP HOUSE |
| 2 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 3 | 100.41.40:Supply, stacking, spreading and consolidating of Red earth in the trench of pipe line for cushion including carriage, loading, unloading & stacking up to any lead. |
| 4 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 5 | 100.41.39:Supply, stacking, spreading and consolidating of Quarry Muck in the trench of pipe line, including carriage, loading, unloading & stacking up to any lead. |
| 6 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 7 | 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 10 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 11 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 12 | 5.9.19:Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges |
| 13 | 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 14 | 5.9.16.1:Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide |
| 15 | 5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars |
| 16 | 50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete |
| 17 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 18 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 19 | 50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge |
| 20 | 4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 21 | 50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete |
| 22 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 23 | 13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) |
| 24 | 11.39:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 25 | 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 26 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood |
| 27 | 50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood |
| 28 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood |
| 29 | 50.9.5.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood/ jack wood 35 mm thick shutters. |
| 30 | 9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter). |
| 31 | 9.71.2:Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete:100x60x2.50 mm |
| 32 | 9.70.4:Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:50x37x1.50 mm |
| 33 | 9.71.3:Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete:75x50x2.50 mm |
| 34 | 50.9.15.2:Supplying and fixing 300 mm Aluminium aldrop |
| 35 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 36 | 50.9.15.5:Providing and fixing iron hooks and eyes: 100 mm |
| 37 | 9.97.3:Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm |
| 38 | 13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing |
| 39 | 13.37.1:White washing with lime to give an even shade:New work (three or more coats) |
| 40 | 13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 41 | 13.48.2:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture |
| 42 | 13.71:Lettering with black Japan pint of approved brand and manufacture |
| 43 | 13.48.3:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 44 | APPENDIX A - PART-II WATER SUPPLY AND SANITARY WORKS |
| 45 | 17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid |
| 46 | 17.7.7:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap |
| 47 | 18.49.1:Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore |
| 48 | 18.52.1:Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore |
| 49 | 50.17.1.2:Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 50 | 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. |
| 51 | 50.18.8.2.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chased and making good the wall etc. 20 mm pipe 12 Kgf/cm2 |
| 52 | 50.18.8.7.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2 |
| 53 | 50.18.8.9.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 |
| 54 | OD77222/2026-2027:Supplying and providing PVC Septic Tank - Below 15 flush capacity with brick masonry soak pit of size 1mx1mx1m and precast cover slab of 5 cm thick including necessary earth work excavation for errecting the sepic tank & soak pit,connecting the septic,closet & soak pit with 110 mm PVC pipe,providing 110 mm PVC door Tee,110 mm PVC door elbow,63 mm PVC vent pipe,vent cowl including loading & unloading charges etc.complete.. |
| 55 | 100.60.13.2.1:Providing 20mm (3/4 inch) house connection with 20mm water meter from existing PVC / HDPE mains up to 110 mm dia., up to a length of 5m using 25mm ( 3/4 inch ) PE Pipe, PE80, PN16, Conforming to IS 4984: 2016 or later edition and PP PN 16 Compression / GM / Brass specials viz. brass ferrule, brass hexagonal nipple, GM full way wheel valve, bend, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges but excluding cost of water meter and meter box and excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. |
| 56 | 100.60.12.4.1:Providing 15mm PVC Tap in the water meter assembly for 20mm connection, using 25mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire charges for tools and labour charges etc. complete and as per the direction of departmental officers. |
| 57 | OD77221/2026-2027:Providing and installing polyethylene water storage tank (ISI marked) with cover and suitable locking arrangement of capacity 500 Ltr providing 20 mm CPVC pipe connection for inlet water supply to tank and out let supply from tank to inside pipe lines ,toilet etc including providing two number 20 mm pvc ball valves in inlet line and one valve in outlet line and one floating valve providing 20 mm CPVC pipe darin outlet in tank for scovring arrangement including providing 20 mm PVC ball, valve in drain pipe and making the unit functional for collecting water from water connection pipe line etc complete including cost and conveyance of polyethylene water storage tank (ISI marked) with cover and suitable locking arrangement of capacity 500 Ltr - 1 No,inlet and outlet pipe connection using 20 mm CPVC pipe and specials - and valves, drain arrangement all labour charge hire charges of tools etc complete as per the direction of engineer in charge. |
| 58 | APPENDIX A - PART III :- ELECTRIFICATION OF PUMP HOUSE. |
| 59 | OD61625/2026-2027:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required (Group B) |
| 60 | OD61622/2026-2027:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with lSI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63ATP&N |
| 61 | OD61627/2026-2027:Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement andwatering pipe etc. (but without charcoal/ coke and salt ) as required. |
| 62 | OD61626/2026-2027:Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 63 | OD61623/2026-2027:Supplying 18 /20 W LED tube light with all accessories |
| 64 | OD61624/2026-2027:Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required - 200 mm X 125 mm X 60 mm |
| 65 | OD40994/2026-2027:Supplying and providing meter box and panel board for KSEB supply and providing necessary fuse unit and idolators for 3 phase supply as per the direction of departmental officers. |
| 66 | APPENDIX B - PART I :-LAYING PUMPING MAIN - WORKING CHARGES. |
| 67 | 100.59.1:Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffic diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation. |
| 68 | 15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road |
| 69 | 100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. |
| 70 | 100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals. |
| 71 | 100.98.1008:Engaging Coolie. |
| 72 | 100.98.1009:Engaging Fitter ( grade 1). |
| 73 | 100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes. |
| 74 | OD44520/2026-2027:Jointing the newly laid PVC pipe of size 110mm PVC with newly laid 80 mm GI puming main by cutting and removing the end existing line and jointing newly laid line with existing line using necessary specials such as couplings/reducers and making a water tight joint including all labour charges, cost and conveyance of all specials, all labour charges, hire charges of tools but excluding excavation and refilling charges etc complete as per the direction of engineer in charge |
| 75 | OD41012/2026-2027:Interconnecting/jointing the newly laid 110 mm PVC. Pipe line to the existing line, by cutting the existing 110 mm PVC. Line cut being diametrically perpendicular to the axis of pipe and smoothening of cut ends, inserting 110 mm PVC Tee, jointing pipes using110 mm CIR Joint supplied by the contractor, making water tight joint, testing the joint to the required test pressure, including cost and conveyence of all materials, all labour charges, hire chrges of tools but excluding excavation and refilling charges as per the direcion of engineer in charge. |
| 76 | 100.31.2.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class II. |
| 77 | 18.69.1:Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Upto 600 mm dia |
| 78 | OD110330/2026-2027:Providing protection tube over the sluice valve for operating the valve using 110 mm PVC pipe, cutting and fixing the pipe over valve, providing cement concrete in the outside of pipe for keeping the pipe in position etc including cost of 110 mm PVC pipe (6 Kg/cm2) - 0.90 M, fixing charges, concreting charges, conveyance charges of materials etc complete as per the direction of engineer in charge. |
| 79 | 100.47.2.2:Leak rectification work in 110mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earth work excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damages to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, ribbon fencing, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: Socket & C.I.R. Jointing. |
| 80 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 81 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 82 | APPENDIX B - PART II :-LAYING PUMPING MAIN - COST OF MATERIALS |
| 83 | 100.98.237:Supply of PVC Pipe, 10kg/cm2, 110mm Dia. |
| 84 | OD61652/2026-2027:Supplying specials and solvent cement suitable for 110 mm PVC pipe 10 Kg/cm2) as per the direction of engineer in charge (3 % of cost of pipe). |
| 85 | 100.98.482:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 100mm. |
| 86 | OD110328/2026-2027:Supplying 110 mm CIR joint full set at site including conveyance charges etc complete as per the direction of engineer in charge. |
| 87 | APPENDIX C : SUPPLY, ERECTION AND COMMISSIONING OF SUBMERSIBLE PUMP SET |
| 88 | OD41008/2026-2027:Supply,erection.and commissioning of electrically operated brand new energy efficient submersible pump set of reputed manufacturers approved make of KWA having ISI mark suitable for 150 /200mm dia, Tube well capable to discharge of water ranges 300 LPM against a head of 75 M with stainless steel shaft with bronze impeller coupled with suitable three phase 400/440V prime over with a delivery size of 80 mm including supplying 3 x 4 mm square submersible flat type cable not less than 10 M, fully automatic star delta starter L&T make (Model No MU-G20), wall mounted type panel board with 63 Amp TPN switch(L&T), Voltmeter, Ammeter with selector switch,indicator lamps, suitable rated capacitor (not less than 6 KVAR) , MCB/ELCB, single phase preventer, 63 Amp changeover switch. having ISI mark, providing proper earthling as per IE standards etc complete, supplying 80mm Heavy duty GI pipe as column pipe not less than 10 M for successful erection of pump set, necessary fabrication works for delivery connection including supplying and fitting 80 mm CI D/F sluice valve - 1 No (PN 1.60) , 80mm CID/F NR valve - 1 No (PN 1.60), 80 mm GM valve (for scour line) etc in delivery pipe and trail running as per the direction of engineer in charge. |
| 89 | OD110229/2026-2027:Supplying electrically operated brand new submersible pump set of suitable HP (Stand by) which shall be from KWA approved reputed manufacturers having Indian standards suitable for 150/ 200 mm dia, Tube well capable to discharge of water 300 LPM against a head of 75 M with stainless steel shaft with bronze impeller coupled with suitable three phase 400/440V prime over with a delivery size of 50 mm etc. complete including one year warrantee period as per direction of engineer in charge |
| 90 | OD43416/2026-2027:Supply, erection and commissioning of electrically operated brand new energy efficient submersible pump set of reputed manufacturers approved make of KWA having ISI mark suitable for 150 /200mm dia, Tube well capable to discharge of water 4.16 LPS against a head of 70 M with stainless steel shaft with bronze impeller coupled with suitable three phase 400/440V prime over with a delivery size of 80 mm including supplying 3 x 4 mm square submersible flat type cable not less than 10 M, fully automatic star delta starter L&T make (Model No MU-G20), wall mounted type panel board with 63 Amp TPN switch(L&T), Voltmeter, Ammeter with selector switch, indicator lamps, suitable rated capacitor (not less than 6 KVAR) , MCB/ELCB, single phase preventer, 63 Amp changeover switch. having ISI mark, providing proper earthling as per IE standards etc complete, supplying 80mm Heavy duty GI pipe as column pipe not less than 10 M for successful erection of pump set, necessary fabrication works for delivery connection including supplying and fitting 80 mm CI D/F sluice valve - 1 No (PN 1.60) , 80mm CID/F NR valve - 1 No (PN 1.60), 80 mm GM valve (for scour line) etc in delivery pipe and trail running as per the direction of engineer in charge. |
| 91 | OD110247/2026-2027:Supplying electrically operated brand new submersible pump set of suitable HP (Stand by) which shall be from KWA approved reputed manufacturers having Indian standards suitable for 150/ 200 mm dia, Tube well capable to discharge of water 4.16LPS against a head of 70 M with stainless steel shaft with bronze impeller coupled with suitable three phase 400/440V prime over with a delivery size of 50 mm etc. complete including one year warrantee period as per direction of engineer in charge |
| 92 | OD41005/2026-2027:Supplying 80 mm GI Class B pipe (weight not less than 8.5 Kg/M) having ISI mark. |
| 93 | OD41007/2026-2027:Supplying 80mm Tee( As per EST No. :WRD/KWA-CE(CR)/EST/12626/2023_26_9_8 ) |
| 94 | OD41001/2026-2027:Supplying good quality 80mm GI BEND ( From EST No. :WRD/KWA-CE(CR)/EST/12626/2023_26_9_8 ) |
| 95 | OD41004/2026-2027: Supply and fixing 63A fuse unit |
| 96 | OD41003/2026-2027:Supplying 3 x 4mm sq. Flat type copper submersible cable having ISI mark |
| 97 | OD41002/2026-2027:Supply, conveying and fittings with specials of 80 mm Flexiible PVC hose |
| 98 | OD41006/2026-2027:Supplying, conveying and fitting mobile module for mobile starter (make L&T, model M power pro) - 2 Nos. (1 No. as standby) for automatic operation of pump set including cost and conveyance of all components and erection charges etc complete as per the direction of engineer in charge. |
| 99 | OD110260/2026-2027:Supplying L&T make Mobile module starter Model M Power Pro |
| 100 | OD43550/2026-2027:Supplying, fixing and commissioning bleaching powder solution / liquid chlorine dosing pump unit delivering 10 Kg pressure and 25 LPH discharge using mechanical positive displacement pump (piston type) three phase dosing pump for injecting bleaching powder solution / liquid chlorine directly to the pumping line at suitable point including providing three phase dosing pump with stand in convenient place, ISI marked PVC storage tanks for mixing and feeding -2 Nos (200 L & 300 L), supplying and providing suitable size CPVC pipe line for all pipe line works, scour valve with proper fittings providing power supply from existing panel board using power cables encased in PVC conduit and accessories, synchronizing the operation of unit from the existing L&T GSM starter module, testing and trail running the unit including cost of mechanical type three phase dosing pump with all accessories, ISI marked PVC tanks -2 Nos, all pipe line works using CPVC pipe and specials, three phase starter and 2.5 sq.mm x 4 core insulated cable for electrical cable connection work, providing 20 -30 Ltr PVC buckets -2 Nos and 1 -1.5 Ltr mugs -2 Nos for mixing and feeding bleaching powder solution, MS supporting structure dosing unit and placing PVC tanks, all labour charges, conveyance charges, hire charges of tools etc complete as per the direction of engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender