Tender For Renovation And Repairing Work Of 10 Nos. Flats Of Block - G Of Lighe At 49 N.N. Road, Kolkata
Tender Value
3.51 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
9 days left
EMD
7029
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Repairing Work Of 10 Nos. Flats Of Block - G Of Lighe At 49 N.N. Road, Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed(i) 15 mm thick Plaster (6:1) |
| 2 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.Ground Floor |
| 3 | 1st Floor |
| 4 | 2nd Floor |
| 5 | 3rd Floor |
| 6 | 4th Floor |
| 7 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of theEngineer - in - Charge. |
| 8 | Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification] [Mode of measurement:The affected surface area of reinforcement shall be considered for payment] |
| 9 | Removing corroded worn out portion of reinforcement (when the area of bar is damaged by more than 25%) by cutting and replacing the same by a new plain round bar of requisite diameter by binding with required lap / welding with old bar, including cost of reinforcement, complete in all respect including removing unserviceable materials from site as per direction of the Engineer - in - charge. Note : Payment on weight (Kg.) of new reinforcement. |
| 10 | Welding in M.S. structural work with gas or electric:(a) Tack weld |
| 11 | Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size without hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement anddisturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge.b) 25 mm thick(without the use of hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M.) |
| 12 | (B) Stitching crack in brick wall by carefully cutting out facebrick 250 mm. long, 75 mm. thick and 125 mm deep into thewall,cleaning the gap and filling up the same with sound newbrick, carefully set in cement mortar (1:3) including mendinggood damages and finishing the surface to match with adjacent areas complete as per direction. |
| 13 | Supplying fitting approved type ventilator in position after cutting holes in walls setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand of any shade. Payment of mending good damages of wall & plaster and painting to be made seperately(i) C.I. ventilator of 5 mm thick(i) upto 0.10 Sq.m. area |
| 14 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar(a) 10 mm thick plasterGround Floor |
| 15 | 1st Floor |
| 16 | 2nd Floor |
| 17 | 3rd Floor |
| 18 | 4th Floor |
| 19 | (i) With 1:6 cement mortar(a) 15 mm thick plasterGround Floor |
| 20 | 1st Floor |
| 21 | 2nd Floor |
| 22 | 3rd Floor |
| 23 | 4th Floor |
| 24 | Neat Cement punning about 1.5mm thick in wall, dado, window, sill, floor etc.NOTE: Cement 0.152 Cu.m Per 100 sq.m. |
| 25 | a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer'sspecification [Cement to be supplied by the Department] |
| 26 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damages complete. (Concrete and brick work for mending damage will be paid separately)(a) Upto area 2.5 Sq.m |
| 27 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected upto three decimals).(d) Sal: Local |
| 28 | Supplying, fitting and fixing hinge cleat in position excluding the cost hinge and other fittings.a) with 50mm iron Butt-hingeiii) Local Sal. |
| 29 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(c) 40mm X 6mm, 125mm Length |
| 30 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vi) 100mm. X 50mm. X 1.25mm. |
| 31 | Iron socket bolt of approved quality fitted and fixed complete.(d) 225mm long x 10mm dia bolt. |
| 32 | A) Iron door ring of approved quality fitted and fixed with nut and washer complete.(i) 50mm dia. |
| 33 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete(ii) 100 mm grip x 10 mm dia rod. |
| 34 | Easing door and windows. |
| 35 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 36 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 37 | A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surfaceWith other than hi-gloss of approved quality(iv) Two coats (with any shade except white) |
| 38 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed WorkPVC Pipes(Dia)15 mm |
| 39 | 20 mm |
| 40 | Supplying, fitting and fixing bib cock or stop cock.(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm |
| 41 | White washing including cleaning and smoothening surface thoroughly.All floors(b) Two coats (to be done on specific instruction). |
| 42 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge |
| 43 | Sub-Total |
| 44 | 18% GST |
| 45 | 1% CESS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender