Tender For 33 Work Of Repair And Painting Etc. Of Officers Houses 1 And 3 Situated In The District Panchayat Premises.
Tender Value
23.11 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
11 days left
EMD
46300
Bank guarantee accepted
Document Fee
4100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Etah → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 33 Work Of Repair And Painting Etc. Of Officers Houses 1 And 3 Situated In The District Panchayat Premises.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantaling of Old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in 50 metres lead. DSR-15.56. Awash 1 |
| 2 | Dismantaling Of Brick work in cement Mortor and Including stacking of materials as directed by Engineer In Charge With in distance 60.00 M DSR-15.7.3 |
| 3 | Dismantling doors and windows leaves I/C stacking of dismantled materials as per E. in charge--DSR-15.12 |
| 4 | Demolishing of tiles work in Floors and Roofs in Cement Mortar including stacking 50 metres lead.DSR-15.23, Flooring, Wall,Ded |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chaijjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). R.C.C. work in Lintel.As in item no. 7 above but for slabs (Using 1:1.5:3 Mix concrete). [1 cement :1.5 coarse sand :3 stone aggregate] M-20 DSR 5.3 |
| 6 | TMT Fe-500 steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks.qty same as R.C.C. work in Slab |
| 7 | Class 150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.DSR 6.1.2 |
| 8 | 3Supply & fixing of flush door commercial quality conforming to I.S. : 2202 Part I (1983) including fixing of wooden cleats & stopper and including fixing and adjustment of hinges , Bolts locks , handles , springs , fitting with necessary screws to be supplied departmentally.Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)Both SIde Laminated (35mm thick). DSR 9.21.1+9.22.1*2. D,D3, Awash-3 |
| 9 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.DSR 10.15.1Hold fast, DOORS, Z-Section steel window, W1, W2, Gate, FOR SINGLE REBATE DOORS - (100X50X2), D,D1 |
| 10 | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws 35 mm thick shutters Second class teak wood.D. DSR '9.134.1.2.1 |
| 11 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm.DSR 9.51.1 |
| 12 | Fixing of Door, windows/ventilators chaukhats in position.Door chaukhats DSR 14.2.1 |
| 13 | Fixing of Door, windows/ventilators chaukhats in position.Window chaukhats DSR 14.2.2 |
| 14 | Fixing of Door, windows/ventilators chaukhats in position.Ventillators chaukhats DSR 14.2.3 |
| 15 | 15mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand. F.M.-2.25. DSR 13.4.2 |
| 16 | 12mm thick plaster in 1:3 cement & coarse sand on ceiling and soffits of stairs upto floor two level.W2 DSR 13.9.1 |
| 17 | Making grooves 10 to 12 mm widex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required.DSR 13.76 |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1200x1200 mm. AwashDSR 11.41.2 |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1000x1000 mm. DSR 11.47.4.DED |
| 20 | Supply and fixing 6 mm (1/4\\") thick China glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. Anti Skid TilesDSR 11.4, Awash-01,FLOOR TILES,TOILET Flooring, Awash-03, TOILET Flooring |
| 21 | Supply and fixing 6 mm (1/4\\") thick China glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. Anti Skid Tiles. DSR 11.40Awash-01, WALL TILES, TOILET, WALL, DED, Awash |
| 22 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor).DSR 11.3.1 Flooring |
| 23 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR '13.62.1. Awash 1,D,W,Gate, Awash 3 D,W,Gate Grill |
| 25 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) with base of wall putty. DSR 13.47.1. Awash 1 Back Side, Fron side, Garrage, Boundry. Ded, Awash3 Back side, Fron side Boundry Wall |
| 26 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials.DSR13.41.1. Awash 1 wall, Toilet, Room, Kitchen, Ceiling, Awash 3, Room Kitchen, Wall, Ceiling |
| 27 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 13.80Same as Above Item, Same as Above Item |
| 28 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. DSR 10.30.1. Awash 1, W1, W2, Awash 3 ,W1,W2, |
| 29 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm DSR 9.62.2, |
| 30 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :(a) 250 mm x 10mm DSR 9.63.1 |
| 31 | (a) 200 mm x 10mm DSR 9.63.2 |
| 32 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mmAwash-1, Awash-3 |
| 33 | P/F curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete (a) 25 mm dia. DSR 9.46.3, Awash 1 D, ,D1W1,Awash 3, D,D1,W1, |
| 34 | Providing and placing \\"Stay in Place PVC Wall formwork\\" made up of extruded Unplasticised Poly Vinyl Chloride (uPVC) consisting of Main panel, 3 way Connector, Starter Channel, Joint Panel, Connection Panels, Door/Window frame/trim panels etc. all complete as per manufacturer design and for all heights as per direction of Engineer-in-charge. (Note: Suitable for in fill walls with appropriate Structural system).125 mm wide Stay in Place PVC Wallform made of minimum 2.50 mm thick sections and minimum weight 21.97 kg/sqm of formwork.DSR-26.96.1. Awash 01, Awash 03, Ded |
| 35 | P/F of 25mm thick shutterd for cup board with second class teack wood i/c ISI marked androised aluminiumbutt hings with necessary screw |
| 36 | Sanatory And Plumbing Work |
| 37 | Electrification Work |
| 38 | S/F of Bamboo Chick |
| 39 | S/F of Electric Gyser with all acssecciries 4.0 ltr |
| 40 | S/F of Electric Gyser with all acssecciries 15.0 ltr |
| 41 | S/F Of water pressure booster pump ISI Marka. |
| 42 | Revolation and Reparing of Sofa Set |
| 43 | S/F of Ceter Table |
| 44 | Revolation and Reparing of double Bed |
| 45 | Disposal OF Malba Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender