Tender for Tender for Work No. 02 Work Of Finishing, Electrification And External Development Of Mathura Vrindavan Development Authority Building.
Tender Value
9.20 Crore
Estimated cost
Bid Submission
27 Oct 2026
4 days left
EMD
18.41 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work No. 02 Work Of Finishing, Electrification And External Development Of Mathura Vrindavan Development Authority Building.
BOQ
| Sl. No. | Item Description |
| 1 | Meeting Room 1 - 80 Seater SITC of DLP Solid state(Laser Phosphor) Projection system with ultra short throw lens maximum throw ratio 0.25 UST having 5000 Lumens, 3D available, 1920 x 1200 Resolution,1800:1 Contrast Ratio, illumination Life 20000 hours, Inputs: HDMI . Should be complete with mountin bracket etc. Approved Makes: Christie/ Barco / Sony |
| 2 | SITC of a 150\\" diagonal motorized tab-tensioned projection screen with a 16:10 aspect ratio. The screen shall feature a matte white projection surface with high gain and a wide viewing angle for superior image quality. It shall include a built-in motor system with IR/RF remote control for smooth and noiseless up/down operation. The system shall be complete with all necessary accessories for proper installation and operation as per site requirements. Approved Makes: Draper/ Netmas / Da-Lite |
| 3 | SITC of a 65-inch 4K UHD display featuring a VA panel with native 3840 × 2160 resolution, 350 nits (typical) brightness, 4000:1 contrast ratio, 72% NTSC color gamut, and 0.372 × 0.372 mm pixel pitch. The display shall offer 178° (H/V) viewing angles, 8 ms response time, 2% haze, and support 16/7 operational use with a Mega dynamic contrast ratio. Connectivity shall include 3× HDMI 2.0 (HDCP 2.2), 2× USB 2.0, stereo mini-jack audio out, RS232 (in/out), RJ45, Wi-Fi, and Bluetooth. No DisplayPort or audio-in support is required. The unit shall operate on AC 100–240V, 50/60Hz with a typical power consumption of 187 W and ≤0.5 W in sleep mode. Approved Makes: Samsung / LG / Sony |
| 4 | SITC of a Dual 4K Lens PTZ Camera featuring 12× optical zoom and 16× digital zoom, equipped with advanced AI features including speaker tracking (automatic speaker identification and tracking), auto-framing (automatic FOV adjustment based on participant count), and Smart Gallery mode (individual close-up frames for each participant). The camera shall include a 119° DFOV panoramic lens with a high-quality 1/1.8\\" 4K CMOS image sensor, 8.42MP effective pixels, focal length of 4.8–57.8 mm, and aperture range of F1.8–F3.6. Minimum illumination shall be 0.5 lux @ F1.8 (AGC ON). Additional imaging features shall include auto/indoor/outdoor/one-touch/manual white balance, variable color temperature, backlight compensation, 2D & 3D DNR, and ≥55 dB SNR. The camera shall support HFOV 80°–7.54° and VFOV 49.2°–4.34°, with motorized pan ±170° and tilt ±90°. Connectivity shall include 1× USB-C (USB 3.0, UVC), 1× RJ45 LAN with PoE+, and 1× 3.5 mm audio port (future use). The camera shall include a built-in 3-microphone array with 180° pickup and an AI algorithm range of up to 8 meters. All required mounting hardware, cables, and accessories shall be included. Approved Makes: Sony / Kramer / Vaddio |
| 5 | SITC of a 4K@60Hz (4:4:4) 3×1 USB-C/HDMI Switcher Extender supporting 1× USB-C and 2× HDMI inputs, with 1× HDMI and 1× HDBaseT outputs. The unit shall feature 2× USB 3.1 host ports, 4× USB device ports, balanced stereo audio de-embedding, auto-switching, HDCP 2.3 compliance, 18 Gbps bandwidth, Deep Color, 3D, and HDR (HDMI 2.0b). It shall include GPIO, RS-232, Ethernet (LAN), IR port, and a front-panel Display ON/OFF button with CEC/RS-232 control. The device shall support PoE, provide 60W USB-C charging (PD 3.0), and comply with CE/UL safety and RoHS/WEEE environmental standards. Complete with all accessories as required. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 6 | SITC of a 4×1 USB 3.1 switcher featuring two USB-C and two USB-B host ports, three USB 3.1 device ports on USB-A connectors, and one USB 3.1 device port on a USB-C connector. The device shall support USB 3.1 data rates up to 10 Gbps, comply with USB 3.2 Gen 2 / 2.0 / 1.1, and include one integrated USB hub. Control and connectivity options include Ethernet (RJ-45), RS-232 (3-pin terminal), and 2× GPIO (2-pin terminal). The switcher shall support USB-C host charging up to 60 W, USB device charging up to 2 A total, PoE, and PD 3.0 compliance. The unit shall be supplied complete with all required accessories. Approved Make: RGB Spectrum / Kramer / Lightware |
| 7 | SITC of a 4K@60Hz (4:4:4) 4×4 HDMI Matrix Switcher with 4 HDMI inputs and 4 HDMI outputs, supporting audio embedding on each input and audio de-embedding on each output. The unit shall provide 4 balanced stereo audio outputs and 4 S/PDIF outputs (RCA), support 2K/4K signals, and comply with HDCP 1.4 and 2.2 standards. It shall operate at an 18 Gbps data rate and support HDR10, xvYCC color space, Dolby TrueHD, DTS-HD Master Audio, and 3D video. The matrix shall include 4 user presets and offer control via Ethernet and RS-232. The device must be CE certified and supplied complete with all required accessories. Approved Makes: RGB Spectrum / Kramer / Lightware |
| 8 | SITC of HDMI Transmitter over Cat 6 ( HDBaseT) up to 70m with Input 1 HDMI, 1 Cat6 (HDBaseT) Output, 2K and 4K support, HDTV Compatible, HDCP 2.2 Compliant with IR and RS-232, Compliance : CE, ISO 9001, etc complete as required. Approved Make:- Extron/ Kramer/ Lightware |
| 9 | SITC of HDMI Receiver over Cat 6 ( HDBaseT) up to 70m with Input 1 Cat6 (HDBaseT), 1 HDMI Output, 1080p, 2K and 4K@60 4:4:4, HDCP 2.2 Compliant, with IR and RS-232, Compliance : CE, etc complete as required. Approved Make:- Extron/ Kramer/ Lightware |
| 10 | SITC of a 4K@60Hz 4:4:4 HDMI scaler with 1 HDMI input, 1 USB-C input, and 1 HDMI output, supporting 2K/4K resolutions, HDTV compatibility, and HDCP 1.4 & 2.2. The unit shall support CEC, provide control via On-Screen Display (OSD), front panel controls, and contact-closure ports, and be CE certified. The system shall be supplied complete with all accessories as required. Approved Make: RGB Spectrum / Kramer / Lightware |
| 11 | SITC of Wireless presentation devices supports video resolution up to 4K, with HDMI output, inbuilt Wi−Fi, 1 Ethernet port, 2 USB port for connecting keyboard, mouse, etc, Supports iOS, Windows and Android operating systems, display minimum 4 users screen at a time, Supports DHCP, connect 100 participants simultaneously, wireless streaming of 4K video at 30 frame per second (FPS), 1024−bit encryption for secure use on the internal network, Remote Collaboration — Distance participants can share content using Chrome and FireFox web browsers Certification: CE etc. Approved Makes: Mersive / Kramer / ScreenBeam |
| 12 | SITC of a table-mount modular cable management and multi-connection solution consisting of 1× universal AC power outlet, 1× USB-C charging/data port, 1× USB-A port, and pass-through modules for 1× HDMI, 1× USB, 1× LAN, and other required interfaces. The unit shall be designed for professional conference/meeting room applications and include all necessary mounting hardware and accessories. Approved Make: RGB Spectrum / Kramer / Lightware |
| 13 | SITC of a 4-port USB 2.0 extender kit capable of extending USB 2.0 signals over twisted-pair cabling up to 100 meters (330 ft). The system shall support two-way powering, fast remote device charging, and the extension of USB 2.0, RS-232, and audio signals. The transmitter shall include 1 USB-B female port for USB host connection, and the receiver shall provide 4 USB-A female ports for device connectivity. The kit shall support bidirectional RS-232 extension and include all necessary accessories for complete installation. Approved Make: RGB Spectrum / Kramer / Lightware |
| 14 | SITC of a Control System equipped with 4GB RAM, 32GB internal memory, and 3 USB ports (2× USB 3.0 and 1× USB 2.0). The unit shall include at least one Ethernet port for monitoring and control, support cloud connectivity for remote programming upload and remote GUI control, and provide 1× Gigabit LAN with dual-band Wi-Fi (802.11 a/b/g/n/ac). The system shall include a minimum of 5 licenses each for iOS and Android applications. The device shall be CE certified and supplied complete with all required accessories.Approved Makes: Kramer / RGB Spectrum / Lightware |
| 15 | SITC of an 8-inch IPS color touch panel with a resolution of 1280×720, 350 cd/m² brightness, 1000:1 contrast ratio, and 16:10 aspect ratio, offering ±80° horizontal and vertical viewing angles. The panel shall include an ambient light sensor, proximity sensor, multi-touch capacitive technology with two-finger gesture support, built-in Wi-Fi 6 (802.11 a/b/g/n/ac/ax) and Bluetooth 5.0, and a 10/100/1000 Mbps Ethernet port. The unit shall feature 4GB LPDDR4 RAM, 32GB eMMC storage, and support video formats H.264/H.265, VC-1, MPEG-4, VP9/VP8, along with image formats JPEG, BMP, GIF, and PNG. It shall include a front 5MP fixed-focus camera and support GUI customization using the OEM’s native GUI software. The device shall operate on PoE (802.3af) and comply with CE, FCC, UL, RoHS, and WEEE certifications. Approved Makes: Kramer / RGB Spectrum / Lightware |
| 16 | SITC of a Wi-Fi router supporting 1 Gbps bandwidth, equipped with 4 LAN ports, and supplied with the required power adaptor. Approved Makes: D-Link / Netgear / TP-Link |
| 17 | SITC of a 16-port PoE Ethernet Switch supporting 1 Gbps bandwidth, complete with all required accessories for proper mounting, configuration, and functional operation.Approved Make: D-Link / Netgear / TP-Link |
| 18 | SITC of a 4\\" high-performance rimless ceiling speaker offering a frequency response of 81 Hz–20 kHz (–3 dB) and 65 Hz–20 kHz (–10 dB). It delivers 60 W AES (240 W peak), 109 dB max SPL, 8 Ω impedance, and 130° conical dispersion with a 2.1 kHz passive crossover. The coaxial design features a 4\\" Vero mid-high driver with ferrite magnet and optimized cone for improved low-frequency output, along with a 1\\" Vero HF driver ensuring clear and natural sound reproduction. Approved Make: British Acoustics / Meyer Sound / Martin Audio / d&b audiotechnik |
| 19 | SITC of 2 × 350 W constant-voltage compatible installation amplifiers, each offering 2 output channels rated at 250 W (8 Ω), 350 W (4 Ω), and 350 W (2.7 Ω), with bridged power of 700 W (8 Ω) and 1000 W (4 Ω). Each amplifier includes 2 analogue inputs, 2 link outputs, and 2 power outputs, featuring XLR connectors for signal input/link output and Speak-On/binding posts for reliable speaker connections, ensuring flexible and robust audio distribution. Approved Make: British Acoustics / Meyer Sound / Martin Audio / d&b audiotechnik |
| 20 | Supply, installation, testing, and commissioning of an 8 × 4\\" expandable column speaker with IP64 rating, offering a frequency response of 150 Hz–18 kHz (–3 dB) and 90 Hz–18 kHz (–10 dB). The system delivers 120 W AES (480 W peak) with 108 dB continuous and 114 dB peak SPL, 120° horizontal × 15° vertical dispersion, 8 Ω nominal impedance, and shielded screw terminal connections. It features eight 4\\" full-range drivers with 1\\" copper voice coils, ferrite magnets, and environmental resistance coating for reliable outdoor and indoor performance. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 21 | Supply, installation, testing, and commissioning of 2 × 700 W constant-voltage compatible installation amplifiers. Each amplifier provides 2 output channels delivering 400 W per channel at 8 Ω, 700 W at 4 Ω, 700 W at 2.7 Ω, with bridged outputs of 1400 W at 8 Ω and 2000 W at 4 Ω. The units feature 2 analogue inputs, 2 link outputs, and 2 power outputs, with XLR connectors for signal input and link output, and Speak-On plus binding post connectors for channel outputs, ensuring flexible and reliable audio distribution. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 22 | SITC of a DSP-based 6×2 audio matrix processor with 4 microphone inputs, 1 USB plug-and-play audio input, 1 S/PDIF input, 2 HDMI inputs, 2 analog audio outputs, and 1 HDMI output. The system features a 32-bit advanced DAC architecture with selectable sampling rates up to 96 kHz, supporting simultaneous processing of all inputs and outputs. Includes built-in AEC (Acoustic Echo Cancellation), Maestro room automation, and an integrated 2×1 HDMI switcher with automatic input selection (priority/last-connected). Supports minimum 4K@60Hz (4:4:4) video resolution, HDMI audio de-embedding, and full configuration via a web-based GUI for input gain, attenuation, DSP settings, routing, mic/line selection, and phantom power control. The device supports RS-232 control via API. Additional components may be included as required to meet full functional specifications.Approved Makes: OHM / British Acoustics/ Martin Audio/ Kramer/ BSS |
| 23 | SITC of a Chairman Unit featuring press-to-speak and priority functions, voting capability, built-in speaker and headphone output, and an included 18\\" gooseneck microphone (true condenser, super-cardioid). Approved Makes: Shure/ OSL/ Sennheiser |
| 24 | SITC of a Delegate Unit equipped with 3-button voting options, built-in speaker and headphone output, and an included 18\\" gooseneck microphone (true condenser, super-cardioid). Approved Makes: Shure/ OSL/ Sennheiser |
| 25 | SITC of a Video Conference Server supporting up to 800 conference microphones, with a frequency response of 20–20 kHz and a dynamic range greater than 85 dB. The system shall include auto PC software for controlled meetings, anti-feedback functionality, and audio input/output interfaces for integration with amplifiers, speakers, and microphone systems. Approved Makes: Shure/ OSL/ Sennheiser |
| 26 | SITC of 7.6 Metres USB 3.0 Active Extender Cable in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 27 | SITC of 7.6 Meters 4K HDMI patch cord in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 28 | SITC of 1.8 meter 4K60 4:4:4 HDMI patch cord in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 29 | SITC of 0.9 Metres USB 3.0 Type-A to Type-B Cable in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 30 | SITC of 3.0 Metres USB 3.0 Active Extender Cable in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 31 | SITC of 4.6 Meters 4K HDMI patch cord in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 32 | SITC of 3.0 Metres 4K USB3.2 Gen-2 USB-C patch cord, 10 Gbps, 100W charging support, etc in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 33 | SITC of 0.9 Metres USB 2.0 Type-A to Type-B Cable in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 34 | SITC of HDBaseT-certified 23 AWG shielded CAT6A cable, Low Smoke and Halogen Free, installed in existing conduits. The cable shall have delay skew <45 ns, NVP 76%, and an operating temperature range of –20°C to +60°C. It must comply with EIA/TIA 568A, ISO/IEC 11801, IEC 60332-1, IEC 61034, IEC 60754, RoHS 2011/65/EU, and have a reaction-to-fire rating of Dca–s2,d1,a1 (optional B2ca–s1,d1,a1). Approved Make:- Kramer /RGB Spectrum/Lightware |
| 35 | SITC of bulk connectors including XLR (male & female), RJ-45, Speakon, Phono, Stereo Jack, Velcro tape, cable ties, and other accessories as required at site. Approved Make: Neutrik / Amphenol / Netmas |
| 36 | SITC of crimp-style shielded RJ45 connectors suitable for larger 23 AWG cables, supporting an insulation diameter of 1.40 mm to 1.50 mm. The connectors shall ensure secure termination and reliable performance as required. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 37 | SITC of 1.5 sqmm (80/0.20mm) × 2-core speaker cable with ATC copper conductors, PVC insulation, twisted core construction, and outer Vasiform-type PVC sheath for reliable audio transmission. Approved Make: Netmas / Kramer / Belden |
| 38 | SITC of 18 AWG microphone cable (24/0.20mm) with 2-core ATC copper conductors, PE insulation, and twisted core construction. The cable includes an inner moisture-proof polymer sheath, 80% ATC copper braid shielding, and a rugged, flexible matte-finish PVC outer jacket, suitable for professional audio and microphone applications. Approved Make: Netmas / Kramer / Belden |
| 39 | SITC of a 22U Equipment rack for housing all rack-mountable devices, including internal wiring, front glass door, heat-dissipation fans, power distribution units, and all required standard accessories, complete in all respects. Approved Make: Netmas / Valrack / Netrack |
| 40 | Meeting Room 2 - 22 Seater SITC of 75-inch VA panel display with 4K UHD resolution (3840×2160), 350 nits typical brightness, 4000:1 contrast ratio, 0.429 mm pixel pitch, 178° viewing angles, 8 ms response time, 72% NTSC color gamut, and 2% haze. Designed for 16/7 operation, it supports dynamic contrast “Mega.” Connectivity features include 3 HDMI 2.0 ports (HDCP 2.2), 2 USB 2.0 ports, stereo mini-jack audio out, RS232 (in/out), RJ45, Wi-Fi, and Bluetooth. The power supply operates at AC 100–240 V, 50/60 Hz with typical consumption of 214.5 W and sleep mode <0.5 W. Approved Make: Samsung / LG / Sony |
| 41 | SITC of a table-mount modular cable management and multi-connection solution consisting of 1× universal AC power outlet, 1× USB-C charging/data port, 1× USB-A port, and pass-through modules for 1× HDMI, 1× USB, 1× LAN, and other required interfaces. The unit shall be designed for professional conference/meeting room applications and include all necessary mounting hardware and accessories. Approved Make: RGB Spectrum / Kramer / Lightware |
| 42 | SITC of a 4K PTZ camera with 12x optical zoom and 16x digital zoom, delivering ultra-clear 4K video at 60fps. The camera features an 8.51-megapixel CMOS image sensor with ultra-low-light performance and advanced 2D and 3D DNR (Digital Noise Reduction) technology. It supports up to 255 preset views and offers multiple connectivity options, including USB 3.0 via a USB Type-B connector, HDMI output, 3G-SDI output via BNC connector, Audio Line In through a 3.5mm mini-jack, RJ-45 10/100/1000M adaptive Ethernet port, RS-232 IN & OUT via 8-pin Mini DIN connectors, and RS-485 through a 2-pin Phoenix connector. Supported video resolutions include 1080P60, 1080P50, 1080I60, 1080I50, 1080P30, 1080P25, 720P60, 720P50, 4KP25, and 4KP30. The camera is equipped with a 12x lens (f = 4.4mm–52.8mm) offering a horizontal angle of view of 71°–8.2° and a vertical angle of view of 42.7°–4.5°, with a horizontal rotation range of ±170° and a vertical rotation range of ±30°. It supports horizontal and vertical flip, and can be controlled via embedded web pages, RS-232 protocol, or the included IR transmitter remote. The camera is certified for safety (CE, FCC) and environmental standards (RoHS, REACH), Approved Makes: Sony / Kramer / Vaddio |
| 43 | SITCof a 4K@60Hz (4:4:4) 3×1 USB-C/HDMI Switcher Extender supporting 1× USB-C and 2× HDMI inputs, with 1× HDMI and 1× HDBaseT outputs. The unit shall feature 2× USB 3.1 host ports, 4× USB device ports, balanced stereo audio de-embedding, auto-switching, HDCP 2.3 compliance, 18 Gbps bandwidth, Deep Color, 3D, and HDR (HDMI 2.0b). It shall include GPIO, RS-232, Ethernet (LAN), IR port, and a front-panel Display ON/OFF button with CEC/RS-232 control. The device shall support PoE, provide 60W USB-C charging (PD 3.0), and comply with CE/UL safety and RoHS/WEEE environmental standards. Complete with all accessories as required. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 44 | SITC of Wireless presentation devices supports video resolution up to 4K, with HDMI output, inbuilt Wi−Fi, 1 Ethernet port, 2 USB port for connecting keyboard, mouse, etc, Supports iOS, Windows and Android operating systems, display minimum 4 users screen at a time, Supports DHCP, connect 100 participants simultaneously, wireless streaming of 4K video at 30 frame per second (FPS), 1024−bit encryption for secure use on the internal network, Remote Collaboration — Distance participants can share content using Chrome and FireFox web browsers Certification: CE etc.Approved Makes: Mersive / Kramer / ScreenBeam |
| 45 | SITC of a Control System equipped with 4GB RAM, 32GB internal memory, and 3 USB ports (2× USB 3.0 and 1× USB 2.0). The unit shall include at least one Ethernet port for monitoring and control, support cloud connectivity for remote programming upload and remote GUI control, and provide 1× Gigabit LAN with dual-band Wi-Fi (802.11 a/b/g/n/ac). The system shall include a minimum of 5 licenses each for iOS and Android applications. The device shall be CE certified and supplied complete with all required accessories. Approved Makes: Kramer / RGB Spectrum / Lightware |
| 46 | SITC of an 8-inch IPS color touch panel with a resolution of 1280×720, 350 cd/m² brightness, 1000:1 contrast ratio, and 16:10 aspect ratio, offering ±80° horizontal and vertical viewing angles. The panel shall include an ambient light sensor, proximity sensor, multi-touch capacitive technology with two-finger gesture support, built-in Wi-Fi 6 (802.11 a/b/g/n/ac/ax) and Bluetooth 5.0, and a 10/100/1000 Mbps Ethernet port. The unit shall feature 4GB LPDDR4 RAM, 32GB eMMC storage, and support video formats H.264/H.265, VC-1, MPEG-4, VP9/VP8, along with image formats JPEG, BMP, GIF, and PNG. It shall include a front 5MP fixed-focus camera and support GUI customization using the OEM’s native GUI software. The device shall operate on PoE (802.3af) and comply with CE, FCC, UL, RoHS, and WEEE certifications. Approved Makes: Kramer / RGB Spectrum / Lightware |
| 47 | SITC of a 4\\" high-performance rimless ceiling speaker offering a frequency response of 81 Hz–20 kHz (–3 dB) and 65 Hz–20 kHz (–10 dB). It delivers 60 W AES (240 W peak), 109 dB max SPL, 8 Ω impedance, and 130° conical dispersion with a 2.1 kHz passive crossover. The coaxial design features a 4\\" Vero mid-high driver with ferrite magnet and optimized cone for improved low-frequency output, along with a 1\\" Vero HF driver ensuring clear and natural sound reproduction. Approved Make: British Acoustics / Meyer Sound / Martin Audio/Amp Luxe |
| 48 | SITC of 2 × 350 W constant-voltage compatible installation amplifiers, each offering 2 output channels rated at 250 W (8 Ω), 350 W (4 Ω), and 350 W (2.7 Ω), with bridged power of 700 W (8 Ω) and 1000 W (4 Ω). Each amplifier includes 2 analogue inputs, 2 link outputs, and 2 power outputs, featuring XLR connectors for signal input/link output and Speak-On/binding posts for reliable speaker connections, ensuring flexible and robust audio distribution. Approved Make: British Acoustics / Meyer Sound / Martin Audio/ Amp Luxe |
| 49 | SITC of a DSP-based 6×2 audio matrix processor with 4 microphone inputs, 1 USB plug-and-play audio input, 1 S/PDIF input, 2 HDMI inputs, 2 analog audio outputs, and 1 HDMI output. The system features a 32-bit advanced DAC architecture with selectable sampling rates up to 96 kHz, supporting simultaneous processing of all inputs and outputs. Includes built-in AEC (Acoustic Echo Cancellation), Maestro room automation, and an integrated 2×1 HDMI switcher with automatic input selection (priority/last-connected). Supports minimum 4K@60Hz (4:4:4) video resolution, HDMI audio de-embedding, and full configuration via a web-based GUI for input gain, attenuation, DSP settings, routing, mic/line selection, and phantom power control. The device supports RS-232 control via API. Additional components may be included as required to meet full functional specifications.Approved Makes: OHM/ British Acoustics/ Kramer/ BSS |
| 50 | SITC of a Video Conference Server supporting up to 800 conference microphones, with a frequency response of 20–20 kHz and a dynamic range greater than 85 dB. The system shall include auto PC software for controlled meetings, anti-feedback functionality, and audio input/output interfaces for integration with amplifiers, speakers, and microphone systems.Approved Makes: Shure/ OSL/ Sennheiser |
| 51 | SITC of a Chairman Unit featuring press-to-speak and priority functions, voting capability, built-in speaker and headphone output, and an included 18\\" gooseneck microphone (true condenser, super-cardioid). Approved Makes: Shure/ OSL/ Sennheiser |
| 52 | SITC of a Delegate Unit equipped with 3-button voting options, built-in speaker and headphone output, and an included 18\\" gooseneck microphone (true condenser, super-cardioid). Approved Makes: Shure/ OSL/ Sennheiser |
| 53 | SITC of a Wi-Fi router supporting 1 Gbps bandwidth, equipped with 4 LAN ports, and supplied with the required power adaptor. Approved Makes: D-Link / Netgear / TP-Link |
| 54 | SITC of a 16-port PoE Ethernet Switch supporting 1 Gbps bandwidth, complete with all required accessories for proper mounting, configuration, and functional operation. Approved Make: D-Link / Netgear / TP-Link |
| 55 | SITC of 7.6 Metres USB 3.0 Active Extender Cable in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 56 | SITC of 7.6 Meters 4K HDMI patch cord in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 57 | SITC of 1.8 meter 4K60 4:4:4 HDMI patch cord in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 58 | SITC of 0.9 Metres USB 3.0 Type-A to Type-B Cable in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 59 | SITC of 3.0 Metres USB 3.0 Active Extender Cable in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 60 | SITC of 4.6 Meters 4K HDMI patch cord in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 61 | SITC of 3.0 Metres 4K USB3.2 Gen-2 USB-C patch cord, 10 Gbps, 100W charging support, etc in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 62 | SITC of 0.9 Metres USB 2.0 Type-A to Type-B Cable in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 63 | SITC of HDBaseT-certified 23 AWG shielded CAT6A cable, Low Smoke and Halogen Free, installed in existing conduits. The cable shall have delay skew <45 ns, NVP 76%, and an operating temperature range of –20°C to +60°C. It must comply with EIA/TIA 568A, ISO/IEC 11801, IEC 60332-1, IEC 61034, IEC 60754, RoHS 2011/65/EU, and have a reaction-to-fire rating of Dca–s2,d1,a1 (optional B2ca–s1,d1,a1). Approved Make:- Kramer /RGB Spectrum/Lightware |
| 64 | SITC of crimp-style shielded RJ45 connectors suitable for larger 23 AWG cables, supporting an insulation diameter of 1.40 mm to 1.50 mm. The connectors shall ensure secure termination and reliable performance as required. Approved Make:- Kramer /RGB Spectrum/Lightware |
| 65 | SITC of 18 AWG microphone cable (24/0.20mm) with 2-core ATC copper conductors, PE insulation, and twisted core construction. The cable includes an inner moisture-proof polymer sheath, 80% ATC copper braid shielding, and a rugged, flexible matte-finish PVC outer jacket, suitable for professional audio and microphone applications. Approved Make: Netmas / Kramer / Belden |
| 66 | SITC of 1.5 sqmm (80/0.20mm) × 2-core speaker cable with ATC copper conductors, PVC insulation, twisted core construction, and outer Vasiform-type PVC sheath for reliable audio transmission. Approved Make: Netmas / Kramer / Belden |
| 67 | SITC of bulk connectors including XLR (male & female), RJ-45, Speakon, Phono, Stereo Jack, Velcro tape, cable ties, and other accessories as required at site. Approved Make: Neutrik / Amphenol / Netmas |
| 68 | SITC of a 12U Equipment rack for housing all rack-mountable devices, including internal wiring, front glass door, heat-dissipation fans, power distribution units, and all required standard accessories, complete in all respects. Approved Make: Netmas / Valrack / Netrack |
| 69 | CCTV Work Supply of 2MP Outdoor Dome camera with 1/2.9\\" CMOS, 4 to 8 mm Automatic Varifocal (AVF) lens, Effective pixels 1920 x 1080, 25fps or Better, Sensitivity - Color 0.1 lx Mono 0.01 lx With IR 0.0 lx, IR Range- min 40Mtrs (Detection), 120 dB Dynamic range, Electronic Day/Night, Automatic Electronic Shutter (AES), H.265, H.264 MP (Main Profile); M-JPEG Video compression, White balance, Backlight Compensation, iDNR, Quad streaming, Privacy Mask, Rule based alarms and tracking, Line crossing, Enter /leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), Motion, tamper and audio detection, camera should be able to simultaneously trigger any 08 user defined rules, Audio Streaming Full-duplex / half duplex, MicroSD card slot for edge recording support min 1.5TB or Better, FTP, Dropbox and e-mail applications, AES/FIPS encryption, signed firmware, 3 axis adjustment, ONVIF Profile S & G & T, PoE, IP66 & NEMA 4k, IK10, CE, FCC, UL certified & NDAA compliant. Bidder Shall submit OEM authorization along with technical Bid.Approved Make: Bosch/ Axis/ Mobotix |
| 70 | Supply of 2MP Outdoor Bullet camera with 1/2.9\\" CMOS, 4 to 8 mm Automatic Varifocal (AVF) lens, Effective pixels 1920 x 1080, 25fps or better, Sensitivity- Color 0.1 lx Mono 0.01 lx With IR 0.0 lx, IR Range- min 30Mtrs (Detection), 120 dB Dynamic range, Electronic Day/Night, Automatic Electronic Shutter (AES), H.265, H.264 MP (Main Profile); M-JPEG Video compression, White balance, Backlight Compensation, iDNR, Quad streaming, Privacy Mask, Rule based alarms, Analytics like Line crossing, Enter /leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 2D tracking based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), Motion and tamper detection, camera should be able to simultaneously trigger any 08 user defined rules, Camera should be able to count number of objects with minimum 60 objects at a time in scene in both moving and static condition with more than 90%accuracy. It should not give false alarms caused by challenging environment. uch as rain, wind(moving trees), water reflection, shadows etc. Camera should also reliably classify person, vehicle in scene, Audio Streaming Full-duplex / half duplex, MicroSD card slot for edge recording support min 1.5TB or Better, FTP, Dropbox and e-mail applications, AES/FIPS encryption, signed firmware, 3 axis adjustment, ONVIF Profile S, G & T, PoE, IP66, IK10, CE, FCC, UL cerified & NDAA Complied. Bidder Shall submit OEM authorization along with technical Bid. Approved Make: Bosch/ Axis/ Mobotix |
| 71 | Supply of 2MP PTZ 30x IP66 Camera along with Wall mount Plate, Pendant wall Mount , Midspan, Single Pot,60W,AC in Surge Protection with following specefications :Camera functionality Backlight compensation (BLC); Display stamping Color (lx) 0.0186 lx Effective pixels (H x V) 1945 x 1097 Ethernet type 10/100BASE-T, Input voltage (VAC) 24 VAC,Iris control Automatic (with manual override),Lens aperture (/F) 1.6 – 4.4 /F Lens focal length (mm) 4.5 – 135 mm, Lens zoom (x) 30 x Material Aluminum, Monochrome (lx) 0.0040 lx. Operating temperature (°C) -40 – 60 °C, Pan range (°) 0° – 360° continuous, Pre-position accuracy (average) (°) 0.10 ° Protocols / standards IPv4; IPv6; UDP; TCP; HTTP; HTTPS; RTP/RTCP; IGMP V2/V3; ICMP; ICMPv6; RTSP; FTP; ARP; DHCP; APIPA (Auto-IP, link local address); NTP (SNTP); SNMP (V1, MIBII); SNMP (V3, MIBII); 802.1x, EAP/TLS; DNS; DNSv6; DDNS (DynDNS.org, selfHOST.de, no-ip.com); SMTP; iSCSI; DiffServ (QoS); LLDP; SOAP; CHAP; Digest authentication, Sensor type 1/2.8 inch CMOS, Storage temperature (°C) -40 – 60 °C Video compression H.264 (ISO/IEC 14496-10); M-JPEG; H.265/HEVC . Bidder Shall submit OEM authorization along with technical Bid.Approved Make: Bosch/ Axis/ Mobotix |
| 72 | Supply of All-in-one recording, viewing and management solution for network surveillance systems for up to 32 channels, Pre-installed, pre-configured IP storage solution, with optional support of RAID-1, Dedicated storage operating system delivers robust , secure operation, Advanced user and alarm management,Intel® Core™ i3-10100E(6 MB Intel® Smart Cache,3.20 GHz),8GB DDR4-2666 1RX8 LP SODIMM, compact mini tower,2 Trays:3.5-inch SATA 3, max 18TB per HDD slot maximum supported, 6 USB ports; Intel onboard graphics (Three digital outputs),Microsoft Windows Server IoT 2022 for Storage UL, CE Certified.2 x RJ45 Gigabit Ethernet LAN ports (teamed);Operating temperature (°C) 0°C to +40°C; Operating relative humidity, noncondensing (%8-90%). Video Managment software In-built (Server-client architecture) with Live viewing of multiple cameras, Local recording and snapshots. Certifications UL, CB, CE, FCC, NDAA, BIS.Hard Disk not included in NVR. Bosch (DIP-4420IG00N. MBV-BLIT-DIP + MBV-MLIT-DIP License .Bidder Shall submit OEM authorization along with technical Bid.Approved Make: Bosch/ Axis/ Mobotix |
| 73 | Supply of 8 TB Surveillance Hard Disk for NVR.Approved Make: Segate/ WD |
| 74 | Supply of 24-Port Gigabit Ethernet PoE+ Smart Switch with 4 SFP ports, Insight remote/cloud manageable PoE Standard: IEEE 802.3at (PoE+) on all 24 ports,PoE Budget: 190 W total across all ports, 24 × Gigabit Ethernet (10/100/1000 Mbps) RJ-45 ports (all support PoE+) 4 × Dedicated Gigabit SFP fiber uplink ports No 10/100 only ports (all are 1 Gb capable) PoE+ support (802.3at) on all 24 Ethernet ports Max PoE Budget: 380W (can deliver up to ~30 W per port depending on load) Designed to power APs, IP phones, cameras, and other PoE devices .Bidder Shall submit OEM authorization along with technical Bid. Approved Make: Netgear/ HPE/Cisco |
| 75 | Supply of 9U Rack with Polyurethane gasket, 17 tank pretreatment process, IP54/IP55 certified. 06 Amp Universal - 06 Socket - 16 Amp Switch with Indicator - 06 Amp Fuse - 06 Amp 3 Pin Plug with Power Cable 0.75 sq.mm 1.5 meter Length - Black Fine Tex. - Assembly. Dimension : 600W x 500D, 600D.Approved Make : Legrend/ D-Link |
| 76 | Supply of 19\\" ModularPatch - 1 U 24 Port 6A Patch Panel 24, RJ 45 Cat-6 connector. Approved Make: Legrend/ D-Link/ Molex |
| 77 | Supply of 6 Port LIU Loaded with SC Port.Approved Make: Legrend/ D-Link/ Molex |
| 78 | Supply of Pigtails Single mode. Approved Make: Legrend/ D-Link/ Molex |
| 79 | Supply of Cat-6A Patch Cord 1 Mtr Approved Make: Legrend/ D-Link/ Molex |
| 80 | Supply of Fiber Patch Cord Single Mode 1 Mtr(SC-LC). Approved Make: Legrend/ D-Link |
| 81 | Supply of Fiber Patch Cord Single Mode 1 Mtr(SC-SC). Approved Make: Legrend/ D-Link |
| 82 | Supply of Cat-6A RJ - 45Computer Jack cat 6A with shutter Modular (1Module).Approved Make : Dlink/ Legarnd/ Molex |
| 83 | Supply & Laying of Cat-6A Cables with 4 twisted pairs, 100 ohms for high-speed data networks. 8 x 23 AWG conductors with PE insulation type S/FTP Shielded Type of sleeves LSOH AWG gauge 23 Maximum linear resistance (ohm/km) 95 DC dielectric strength 1KV/ 1min Characteristic impedance from 1 to 100 MHz 100 Ω ± 15%. Approved Make: Dlink/ Legarnd/ Molex |
| 84 | Supply of 1000 Base - LX Single Mode, 10KM, SFP Transceiver. High Performance Singlemode SFP Transceivers (SFP Module) with LC Port Types, Full Duplex 802.3x Flow Control, Wave length: 850nm/1310nm,Power Support: 3.3V, Optical Receiver Sensitivity : -20dBm (maximum), Maximum Voltage 6.0V, Maximum Current 300mA. Approved Make: Netgear/ HPE/ Cisco |
| 85 | Providing & Fixing of Single Mode Media Converter, 10/100/1000 Base-T to 1000 Base-LX, Fiber wavelength : 1310nm, Max. Distance : 10 Km., Ports : One RJ - 45 and One Fiber port (Duplex SC type connector), Operating Temperature 0° C to 50° C, Operating Voltage AC 240V or DC +5V, Power Consumption (Max.) at 240 V : 3W, Emission (EMI) & Safety Certifications : CE, FCC, RoHS. Approved Make: D-Link/ TP Link/ Cisco |
| 86 | Supply & Laying of 6 Core Single Mode Fiber Armoured Cable. Approved Make : D-Link/ Legarnd/ Molex |
| 87 | Supply & Laying of 25mm MMS PVC Conduit with accessories like bend, dibbi, etc.Approved Make : AKG/ Polycab/ Crown |
| 88 | Supply of LED Display 50\\" : Supply of Display Type:4K UHD,Display Backlight TypeDirect,Resolution: Ultra HD 3840 x 2160,Refresh Rate: 60 Hz, Power Supply (Voltage, Hz) AC 100~240V 50-60Hz, 4K UHD AUDIO - Audio Output 20W.Approved Make: LG/ Samsung/ Sony |
| 89 | OFFICE FURNITURE Reception table : The overall size of the reception table shall be 2400 mm length, 750 mm depth & 1050 mm height. On the front side both ends shall be provided with groove design strips to enhance the overall look. At the centre of the front side L shape surface shall be provided fixed up with hinges to paste logo of the University. The entire table shall be made up of 25mm / 18mm thick pre laminated particle board of E1 norms. Inside of table a working height shelf should be provided or height 750 mm to keep desktop/ laptop and normal working with sitting. the edges of the visible surface shall be sealed with 2mm thick PVC lipping on automatic machine. Unless specified tolerance of +/- 5mm to be considered for product dimensions Length, Depth & height and tolerance of 5% to be considered in thickness & size of material & components used. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark.Geeken, Dice, Godrej |
| 90 | The overall size of table shall be 1200L X 600D X 750H . The worktop shall be made of 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm pvc edge band all the side of worktop. The understructure shall be made up of MS powder coated legs having enhanced look trapezoidal cross section size 52mm x 52mm x 52mm x 26mm with chamfered corners and thickness of 1.6mm. Edges of the leg should not have sharp edges. For safety of users a radius of R3.20 mm should be provided. The Trapezoidal tube shall be connected with die cast connectors at top, leg shoe & levelers at bottom. High pressure aluminum die cast connectors shall of ADC-12 material confirming to ASTM E 1251-2011, IS 7658-1990 & IS 11035 – 1190. The vertical legs shall be connected by horizontal beams with the help of aluminum die cast connector that joints the legs vertically and horizontally with pipe of cross section 50 x 25 mm x 1.6 mm thickness. The die cast connect size shall be L shaped having angle of 10 degrees for vertical leg side. The Diecast connector will have same shape as of Trapezoidal vertical leg at one side and another side matching to horizontal cross section 50x25. For ease of Wire Management - 65 dia wire manager hole per workstation. Raceway 250mm HT, 70mm thick raceway with laminated fascia is provided & vertical wire entry is considered. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark, Geeken, Dice, Godrej |
| 91 | OverAll Workstation Size: 1500 X 750 X 1200HT NEO 50MM partition & Side Storage Size: 600 X 450 X 750HT Workstations of overall panel thickness 50 mm (+/-5mm) and height of 1200mm (+/- 5mm). The worktop shall be made up of 25mm E1 norm PLPB with matching PVC edge band 2mm thick. The worktop shall be provided with 65mm gromet cut & shall be supported on CRCA bracket with one side fixed on rectangular slot of frame vertical and other side to worksurface. The main partition shall be supplied on main and return side. The partition frame shall be made up of nonferrous 6063 grade alum alloy confirming to DIN ISO-2768-1 & fabricated through weldless technology & fitted with pre moulded M8 levellers zinc passivated for height adjustment. Frame shall have vertical & horizontal members, vertical channels have inbuilt groove with rectangular slots to fix cantilever / gable end brackets. Frame to frame shall be attached through male/ female hook mechanism pressure die casted parts made in zinc alloy Mazak5. The workstations shall be BIFMA Level 2 certified as on tender due date. Adequate ribs to be given in extrusion profiles having variable thicknesses of 1.10mm to 2.50mm for better durability. Frame to post shall be attached by male/female hooks made up of 2mm thick CRCA material zinc passivated to 10-12 microns. Each frame shall be fitted with tiles, male & female hooks, two end cap at top and bottom. Bottom caps shall be provided with leveller fixing arrangement. all caps shall be of aluminium ADC-12 pressure die cast. top trip shall be flat aluminium confirming to DIN ISO-2768-1. The data & power cables provision to be given at different levels. skirting raceways shall be designed for snap fitting for data cables and for power cables raceway below worktop shall be provided. Tiles of overall thickness 6mm thickness constructed out of PLPB E-1 norms upholstered with fabric or Laminated tile should be slide to the grooves provided in aluminium frame vertically, two tiles on either side of the frame to complete the assembly. The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice |
| 92 | OverAll Workstation Size: 1500 X 750 X 1200HT NEO 50MM partition Workstations of overall panel thickness 50 mm (+/-5mm) and height of 1200mm (+/- 5mm). The worktop shall be made up of 25mm E1 norm PLPB with matching PVC edge band 2mm thick. The worktop shall be provided with 65mm gromet cut & shall be supported on CRCA bracket with one side fixed on rectangular slot of frame vertical and other side to worksurface. The main partition shall be supplied on main and return side. The partition frame shall be made up of nonferrous 6063 grade alum alloy confirming to DIN ISO-2768-1 & fabricated through weldless technology & fitted with pre moulded M8 levellers zinc passivated for height adjustment. Frame shall have vertical & horizontal members, vertical channels have inbuilt groove with rectangular slots to fix cantilever / gable end brackets. Frame to frame shall be attached through male/ female hook mechanism pressure die casted parts made in zinc alloy Mazak5. The workstations shall be BIFMA Level 2 certified as on tender due date. Adequate ribs to be given in extrusion profiles having variable thicknesses of 1.10mm to 2.50mm for better durability. Frame to post shall be attached by male/female hooks made up of 2mm thick CRCA material zinc passivated to 10-12 microns. Each frame shall be fitted with tiles, male & female hooks, two end cap at top and bottom. Bottom caps shall be provided with leveller fixing arrangement. all caps shall be of aluminium ADC-12 pressure die cast. top trip shall be flat aluminium confirming to DIN ISO-2768-1. The data & power cables provision to be given at different levels. skirting raceways shall be designed for snap fitting for data cables and for power cables raceway below worktop shall be provided. Tiles of overall thickness 6mm thickness constructed out of PLPB E-1 norms upholstered with fabric or Laminated tile should be slide to the grooves provided in aluminium frame vertically, two tiles on either side of the frame to complete the assembly. The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice |
| 93 | The Overall size of the main table shall be 1200 mm L x 750 mm D x 750 H &. The worktop shall be made up of 25mm thick PLPB, Modesty Panel shall be 18mm thick PLPB both E1 norms duly sealed with 2mm pvc edge band. Modesty shall be connected with 3 nos L-shape pressure aluminium die casted connector of 50 mm width.Understructure shall be supported on CRCA MS powder coated angular legs of cross section 40 x 40 x 1.6mm thick and horizontal beam made up of 40 x 20 x 1.2 mm thick. Vertical Legs shall be connected with horizontal beam through aluminium die cast connectors having opening of 40 x 40 on the vertical side & 50 x 25 on the horizontal side to accommodate connection of Leg & horizontal frame. Connector shall be L shaped having an angle of 10 degree. Cross beam of section 40 x 20 shall be fixed below the table table on the horizontal frame using aluminium die cast connector for better strength. Understructure shall powder coated upto 40 to 60microns.Wire Management : 65 dia wire manager hole per workstation.PLB MOBILE PEDESTAL (2D+1F)Size: 400L x 450D x 600HT. Made of 18mm thick PLB with 2 Drawer +1 Filling unit arrangement, Castors are provided for easy mobility of the pedestal, Suitable Finger Groove handles, Locking system & other necessary hardware are provided. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark.Geeken, Dice |
| 94 | The Overall size of the main table shall be 1500 mm L x 750 mm D x 750 H &. The worktop shall be made up of 25mm thick PLPB, Modesty Panel shall be 18mm thick PLPB both E1 norms duly sealed with 2mm pvc edge band. Modesty shall be connected with 3 nos L-shape pressure aluminium die casted connector of 50 mm width.Understructure shall be supported on CRCA MS powder coated angular legs of cross section 40 x 40 x 1.6mm thick and horizontal beam made up of 40 x 20 x 1.2 mm thick. Vertical Legs shall be connected with horizontal beam through aluminium die cast connectors having opening of 40 x 40 on the vertical side & 50 x 25 on the horizontal side to accommodate connection of Leg & horizontal frame. Connector shall be L shaped having an angle of 10 degree. Cross beam of section 40 x 20 shall be fixed below the table table on the horizontal frame using aluminium die cast connector for better strength. Understructure shall powder coated upto 40 to 60microns.Wire Management : 65 dia wire manager hole per workstation.PLB MOBILE PEDESTAL (2D+1F) Size: 400L x 450D x 600HT. Made of 18mm thick PLB with 2 Drawer +1 Filling unit arrangement, Castors are provided for easy mobility of the pedestal, Suitable Finger Groove handles, Locking system & other necessary hardware are provided. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 95 | The Overall size of the main table shall be 1500 mm L x 750 mm D x 750 H & Side unit shall be 750 x 450 x 750ht. The worktop shall be made up of 25mm thick PLPB, Modesty Panel shall be 18mm thick PLPB both E1 norms duly sealed with 2mm pvc edge band. Modesty shall be connected with 3 nos L-shape pressure aluminium die casted connector of 50 mm width.Understructure shall be supported on CRCA MS powder coated angular legs of cross section 40 x 40 x 1.6mm thick and horizontal beam made up of 40 x 20 x 1.2 mm thick. Vertical Legs shall be connected with horizontal beam through aluminium die cast connectors having opening of 40 x 40 on the vertical side & 50 x 25 on the horizontal side to accommodate connection of Leg & horizontal frame. Connector shall be L shaped having an angle of 10 degree. Cross beam of section 40 x 20 shall be fixed below the table table on the horizontal frame using aluminium die cast connector for better strength. Understructure shall powder coated upto 40 to 60microns.Wire Management : 65 dia wire manager hole per workstation. Side unit shall be 900 x 450 x 750 (WDH) mm. Top & sides shall made up of 18 mm thick PLPB E1 norms & back 9 mm thick PLPB with 2mm PVC lipping, Shutters & drawer front shall be 18 mm thick PLPB. Lock shall be provided. The hinged doors top and drawer top shall be provided with finger groove handle-less design created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 96 | Cabin Table in size of 1800W X 750D X 750H, Side unit of 1050W X 450D X 750H Table Top: 25mm thick Pre laminate particle board E1 norms with 2mm PVC edge lipping on all exposed edges. Two Long sides of the work surface shall be provided with reverse tapered edge design created by chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it acts as vertical structural support member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way connectors. The connector should have “V” / “U” shape tapered groove for sliding a Aluminium diecast slider nut. The slider nut shall be an Aluminium diecast part that has same taper as of “V” / “U” shape in the diecast connector. Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover. Cross Beam: Leg to Leg shall be connected using cross beams made from 50x25x1.60mm (16g) Rectangular tube and to give floating look & to connect the table top with cross beams injection moulded polycarbonate spacers should be used of dia 61mm x 42.50mm H insert moulded with M6x1P zinc blue plated bolt of 22mm L.Spacer height including bolt should be 64.50mm. Side Composite Storage (Openable Shutter +2D+1F) Top & Sides : 18mm Thk pre laminated particle board Back E1 norms: 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Handle. Handless Finger groove shall be created on top edge of shutter doors by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable number lock shall be provided. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 97 | Cabin Table in size of 2100W X 900D X 750H, Side unit of 1200W X 450D X 750H, Back unit of 2100W X 450D X 750H Table Top: 25mm thick Pre laminate particle board E1 norms with 2mm PVC edge lipping on all exposed edges. Two Long sides of the work surface shall be provided with reverse tapered edge design created by chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it acts as vertical structural support member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way connectors. The connector should have “V” / “U” shape tapered groove for sliding a Aluminium diecast slider nut. The slider nut shall be an Aluminium diecast part that has same taper as of “V” / “U” shape in the diecast connector. Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover. Cross Beam: Leg to Leg shall be connected using cross beams made from 50x25x1.60mm (16g) Rectangular tube and to give floating look & to connect the table top with cross beams injection moulded polycarbonate spacers should be used of dia 61mm x 42.50mm H insert moulded with M6x1P zinc blue plated bolt of 22mm L.Spacer height including bolt should be 64.50mm. Side Composite Storage (Openable Shutter +2D+1F) Top & Sides : 18mm Thk pre laminated particle board Back E1 norms: 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Handle. Handless Finger groove shall be created on top edge of shutter doors by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable number lock shall be provided. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 98 | Cabin Table in size of 1800W X 750D X 750H, Side unit of 1050W X 450D X 750H, Back unit of 1800W X 450D X 750H Table Top: 25mm thick Pre laminate particle board E1 norms with 2mm PVC edge lipping on all exposed edges. Two Long sides of the work surface shall be provided with reverse tapered edge design created by chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it acts as vertical structural support member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way connectors. The connector should have “V” / “U” shape tapered groove for sliding a Aluminium diecast slider nut. The slider nut shall be an Aluminium diecast part that has same taper as of “V” / “U” shape in the diecast connector. Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover. Cross Beam: Leg to Leg shall be connected using cross beams made from 50x25x1.60mm (16g) Rectangular tube and to give floating look & to connect the table top with cross beams injection moulded polycarbonate spacers should be used of dia 61mm x 42.50mm H insert moulded with M6x1P zinc blue plated bolt of 22mm L.Spacer height including bolt should be 64.50mm. Side Composite Storage (Openable Shutter +2D+1F) Top & Sides : 18mm Thk pre laminated particle board Back E1 norms: 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Handle. Handless Finger groove shall be created on top edge of shutter doors by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable number lock shall be provided. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 99 | Cabin Table in size of 2100W X 900D X 750H, Back unit of 1650W X 450D X 750H Table Top: 25mm thick Pre laminate particle board E1 norms with 2mm PVC edge lipping on all exposed edges. Two Long sides of the work surface shall be provided with reverse tapered edge design created by chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it acts as vertical structural support member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way connectors. The connector should have “V” / “U” shape tapered groove for sliding a Aluminium diecast slider nut. The slider nut shall be an Aluminium diecast part that has same taper as of “V” / “U” shape in the diecast connector. Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover. Cross Beam: Leg to Leg shall be connected using cross beams made from 50x25x1.60mm (16g) Rectangular tube and to give floating look & to connect the table top with cross beams injection moulded polycarbonate spacers should be used of dia 61mm x 42.50mm H insert moulded with M6x1P zinc blue plated bolt of 22mm L.Spacer height including bolt should be 64.50mm. Side Composite Storage (Openable Shutter +2D+1F) Top & Sides : 18mm Thk pre laminated particle board Back E1 norms: 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Handle. Handless Finger groove shall be created on top edge of shutter doors by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable number lock shall be provided. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 100 | The overall size of main table shall be 2400L x 840D x 750H. With side unit 2000L x 500D x 610H.The table top shall be 50mm thick at the edges of the top.The table shall be made of prelaminate MDF board in melamine finsih. The useable top size shall be 2200L x 840 mm D. Table top corner shall be round and cover with aluminium extrustion. The modesty panel of the main table shall be made up of 13mm thick Pre-laminate MDF board. The modesty shall be design in honeycome pattern with PU/melamine finish. At the front side of table LED light strip shall be provided. The LED light increase the overall look of the table. The table top shall be rest on, one side of fixed pedestal and other side shall be on Extented return unit. Fixed pedestal shall have 2 equal drawer with finger grove handle ( handless desgin ). The tabletop shall have a leather pad with size of 1000mm x 440mm that gives a premium look. Side unit - Side table shall be size 2000 L x 500 D x 610 H with 16mm thick MDF board with melamine finish. Fixed side return with 2 drawers and 2 swing door. Fixed side return shall have flexibility to be placed left or right during time of first assembly. All the Drawer and shutters shall be operated by finger grove handle on the Drawer and shutter facia. The table top shall also have Standard wire provision with 3 socket upward and 2 scoket downward with size of 450L x 60W. The overall size of back unit shall be 2350L x 400D x 1980H. The back unit shall be made of prelaminate MDF board with melamine finish.The storage shall have one openable shutter with size of 400W x 390D x 1960H made of 15mm thick board.The storage shall have open cabinet. The open shelf shall be made of 25mm thick partical board and in middel compartment. The top open cabinet shall have have provision of LED strip light. storage shall have open shelves to keep the awards, trophies or documents. Storages shall have multiples compartments with all other essential hardwares like hings, handles etc. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 101 | U shape Conference Table . OverAll Size: 14400L X 2700D X 750HT, Main Table: 2700X900X750HT(01Nos.), Side Table : 1500 X 750 X 750(18 Nos.) The main worktop shall be made of 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm pvc edge band all the side of worktop.The addon table shall be both side made of 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm pvc edge band all the side of worktop.Modesty shall be made of 18mm thick pre laminate partical boards with E1 norms with 2mm pvc edge band all the visible side and connected with 2 nos L-shape pressure aluminium die casted connector. The height of the modesty shall be 450mm.And the gable end shall be made of 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm pvc edge band all the side.Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover made up of steel sheets.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 102 | The overall size of meeting table shall be 4200L x 1200D x 750H.The worksurface of the table shall be made up of 25mm thick Pre-laminate particle board as per E1 norms and its edges duly sealed with 2mm PVC Lipping on automatic machine at visible sides. Two Long sides of the work surface shall be provided with reverse tapered edge design created by chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it shall acts as vertical structural support member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way connectors. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover made up of steel sheets. The OEM must have quality certification like ISO 9001, BIFMA Level 2, Green Guard by UL, India Design Mark and IGBC Gold Rated manufacturing facility. The approved makes shall be Haworth, Steel Case, Godrej, Featherlite & Herman Miller, Geeken, Dice |
| 103 | The overall size of conference table shall be 3000L x 900D x 750H. The worktop shall be made of 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm pvc edge band all the side of worktop. . It shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. The understructure shall be made of mild steel with powdercoating having thickness of 50-60 microns.The understructure of the Main table shall be provided with heavy duty 4 vertical legs made up of boat shaped having radius 170 mm CRCA MS tubes having max. size of 100 mm on circular side x 40 mm flat x 1.6 for better durability. 4 nos Diamond Shape CRCA MS Tubes of size 55mm x 12mm x 61mm x 12mm x 55mm x 1.6 mm shall used as Horizontal cross beams under table top that shall be connected to all 4 vertical legs through pressure die cast aluminium connector. The die cast connector shall connect the leg and the horizontal beams neatly without any gap. The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice |
| 104 | The Overall size of the Dinning table shall be 1500 x 800 x 760. Supplying 4-seater dining table whoseLeg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it shall acts as vertical structural support member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast connectors. Top surface shall be 10mm thick toughened coloured glass resting on 18mm thick prelaminated particle board E1 norms duly tapered for better aesthetics. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 105 | The Overall size of the Dinning table shall be 1650 x 900 x 760. Supplying 6-seater dining table whoseLeg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it shall acts as vertical structural support member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast connectors. Top surface shall be 10mm thick toughened coloured glass resting on 18mm thick prelaminated particle board E1 norms duly tapered for better aesthetics. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 106 | Supplying & placing cafe table with an overall size 800 X 800 X 750. The top of the table shall be made 18mm thick PrelamHydroshield Top. The profile shall be in square shape. The top shall be supported on MS powder coated 2mm thick sheet. The table under structure shall be made up of SS grade 202 base pole leg having size 60mm X 60mm with 1.2mm thick. The base plate shall be SS 202 grade base having size 460mm X 460mm. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 107 | Supplying & placing cafe High table with an Overall size of table shall be of size 1800 L X 800D X 1050 H (mm). The worksurface of the table shall be made up of 18mm thick Prelam hydroshield top water resistant. The understructure will feature vertical legs made of 50 mm x 50 mm x 1.6 mm steel tubing, while the horizontal frame will be constructed from 50 mm x 25 mm x 1.6 mm steel. A cross beam, sized 40 mm x 20 mm x 1.6 mm across the length of the table, will be installed beneath the tabletop to provide additional support. This cross beam shall be connected on both sides with pressure die cast connectors of 50 mm height, 70 mm width & 35 mm depth designed in a shape acting as spacer between horizontal frame & worksurface. Understructure shall powder coated upto 40 to 60microns. Tolerance of +/- 5mm to be considered for dimensions Length, Depth & height and tolerance of 5% to be considered in thickness.The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite Geeken, Dice |
| 108 | LOW TABLE -SWITCH 1800L x 900D x 750H The worksurface of the table shall be made up of 18mm thick Prelam hydroshield top water resistant. The understructure will feature vertical legs made of 50 mm x 50 mm x 1.6 mm steel tubing, while the horizontal frame will be constructed from 50 mm x 25 mm x 1.6 mm steel. A cross beam, sized 40 mm x 20 mm x 1.6 mm across the length of the table, will be installed beneath the tabletop to provide additional support. This cross beam shall be connected on both sides with pressure die cast connectors of 50 mm height, 70 mm width & 35 mm depth designed in a shape acting as spacer between horizontal frame & worksurface. Understructure shall powder coated upto 40 to 60microns. Tolerance of +/- 5mm to be considered for dimensions Length, Depth & height and tolerance of 5% to be considered in thickness.The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice |
| 109 | Sturdy PU Tandem SJ - 708 LA - 3 Seater Seat:Cold consolidation and foaming molding with high density polyurethane(PU), which with high trength metal frame. Armrest:Die casting aluminumalloy with polish treatment and sprayed with static powder. Back:Cold consolidation and foaming molding with high density polyurethane(PU), which with high trength metal frame. Feet:high quality aluminum alloy material, large precision casting mold. Die casting after direct polishing, electrostatic powder spraying treatment. Beam: T=2.5MM Dia=60MM,Hexagonal metal tube, with strong load-bearing capacity and stability Black PP,protect the floor from scratching The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 110 | The overall size of three seater sofa shall be 1830L x 750D x 740D.The structure of the sofa shall be made up of silver wood and pine wood. The foam used in making this sofa shall be of density 32 and 40. Roll poly filling should be used with this pu foam for giving extra comfort and softness to sofa. high quality nevar belts & good quality stapler pins to be used. The sofa shall be upholtered with leatherette 75% PVC & 25% polyster - 640 GSM, Abrasion - 100000 cycles The legs shall be made up of stainless steel material. .The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice |
| 111 | The overall size of one seater sofa shall be 770L x 750D x 740D.The structure of the sofa shall be made up of silver wood and pine wood. The foam used in making this sofa shall be of density 32 and 40. Roll poly filling should be used with this pu foam for giving extra comfort and softness to sofa. high quality nevar belts & good quality stapler pins to be used. The sofa shall be upholtered with leatherette 75% PVC & 25% polyster - 640 GSM, Abrasion - 100000 cycles The legs shall be made up of stainless steel material. .The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice |
| 112 | 2 Seater Sofa : Overall size shall be 1610 mm W x 1000 mm D x 880 mm H. Sofa inner frame structure shall be made from the combination of treated solid wood and plywood having high quality webbing belts to ensure good strength, rigidity & stable construction to offer high durability. There shall be extra padding between the armrest & the seat on both sides for better comfort & polyfilled in arms & backrest. The polyurethane (PU) foam shall be used in Seat & back rest having 40 density and 32 density respectively. Seat to backrest angle should be ergonomically designed to offer the best seating comfort. Seat height shall be normally between 16 to 18 inches and depth shall be between 20-22 inches. The sofa shall have solid wooden leg. Upholstery shall be of high quality Leatherite offer the best feel & comfort. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 113 | Centre table SizeThe overall size of the Centre table shall be 1050 mm Length x 550 mm depth, 450 mm height. the table top shall be made up of 18mm thick prelaminated particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The Chair understructure should be provided with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall not be sharp. The legs shall be in angular design & thicker on the top & thinner on the bottom side.The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date. Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice |
| 114 | The overall size of Full height storage shall be 900 x 450 x 2400 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-less design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity should be provided for safe storage of documents. Geeken, Dice |
| 115 | Three Seater Sofa: The overall size shall be 1800L x 665D x 775H.The understructure of the sofa shall be made from solid wood i.e properly treated & seasoned kiln dried beach wood, finished with clear synthetic PU coating for the best resilence and high durability. The legs and the frame shall be joined together by method of tenon and mortise for durability and better aesthetics.The outer side of the legs shall be rounded & inner side shall be corner edges.The structure of the sofa shall be made up of solid wood and ply. The foam used in making this sofa shall be of density 32 and 40. Roll poly filling should be used with this pu foam for giving extra comfort and softness to sofa. high quality nevar belts & good quality stapler pins to be used. The seat & back shall have fabric upholstery.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 116 | Two Seater Sofa: The overall size shall be 1200L x 665D x 775H.The understructure of the sofa shall be made from solid wood i.e properly treated & seasoned kiln dried beach wood, finished with clear synthetic PU coating for the best resilence and high durability. The legs and the frame shall be joined together by method of tenon and mortise for durability and better aesthetics.The outer side of the legs shall be rounded & inner side shall be corner edges.The structure of the sofa shall be made up of solid wood and ply. The foam used in making this sofa shall be of density 32 and 40. Roll poly filling should be used with this pu foam for giving extra comfort and softness to sofa. high quality nevar belts & good quality stapler pins to be used. The seat & back shall have fabric upholstery.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 117 | One Seater Sofa: The overall size shall be 700L x 665D x 775H.The understructure of the sofa shall be made from solid wood i.e properly treated & seasoned kiln dried beach wood, finished with clear synthetic PU coating for the best resilence and high durability. The legs and the frame shall be joined together by method of tenon and mortise for durability and better aesthetics.The outer side of the legs shall be rounded & inner side shall be corner edges.The structure of the sofa shall be made up of solid wood and ply. The foam used in making this sofa shall be of density 32 and 40. Roll poly filling should be used with this pu foam for giving extra comfort and softness to sofa. high quality nevar belts & good quality stapler pins to be used. The seat & back shall have fabric upholstery.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 118 | The overall size of the table shall be 1050 L x 525 D x 450 H mm. The top surface of the table shall be in boat shape design having maximum size at the middle & lesser at the ends to form this unique shape. The table top shall be made up of 18mm thick Prelaminated particle board of E1 norms. The edges shall be sealed properly with 2mm thick PVC edge banding on automatic machine. The understructure of the table shall be made from solid wood i.e properly treated & seasoned kiln dried beach wood, finished with clear synthetic PU coating for the best resilence and high durability. The legs and the frame shall be joined together by method of tenon and mortise for durability and better aesthetics. Four legs shall be provided and the cross section of leg at the bottom shall be 35x35 and top shall be 55x35 provided in tappered finish for better looks. The outer side of the legs shall be rounded & inner side shall be corner edges. The wooden frame shall be of size 55mm x 22mm thick with visible face of 55 mm front and 22mm shall be below the table top running at all four ends as well as one support in the middle. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 119 | The overall size of the table shall be 600 L x 600 D x 450 H mm. The top surface of the table shall be in boat shape design having maximum size at the middle & lesser at the ends to form this unique shape. The table top shall be made up of 18mm thick Prelaminated particle board of E1 norms. The edges shall be sealed properly with 2mm thick PVC edge banding on automatic machine. The understructure of the table shall be made from solid wood i.e properly treated & seasoned kiln dried beach wood, finished with clear synthetic PU coating for the best resilence and high durability. The legs and the frame shall be joined together by method of tenon and mortise for durability and better aesthetics. Four legs shall be provided and the cross section of leg at the bottom shall be 35x35 and top shall be 55x35 provided in tappered finish for better looks. The outer side of the legs shall be rounded & inner side shall be corner edges. The wooden frame shall be of size 55mm x 22mm thick with visible face of 55 mm front and 22mm shall be below the table top running at all four ends as well as one support in the middle. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice |
| 120 | CHAIR FOR RECEPTION +FIRE CONTROL +DISPATCH+SINGLE WINDOW + TYPIST+CLERK+LIPIK + VC STAFF+SECRETART STAFF+PA STAFF GDI + RECORD KEEPER +LIBERARY AREAFeatherlite Comet Medium Back Mesh Chair with Adjustable Arms One Way Height Adjustable Arms with soft PU Padding AN 70 Mesh for Breathability Fabric Upholstered Cushion Seat Adjustable Tension Knob Ergonomic Design Nylon Base and Castors Chair Net Weight: 15±0.5 kg Seat Depth: 455±10mm Seat Width: 480±10mm Chair Width: 660±10mm Chair Depth: 660±10mm Minimum Chair Height: 915±10mm Maximum Chair Height: 1015±10mm Minimum Seat Height: 435±10mm Maximum Seat Height: 535±10mm Arm Rest Height: 185-275mm Arm Depth: 255±10mm Width (Arm to Arm): 450±10mmBackrest Height from Seat: 500±10mm. Geeken, Dice, Godrej |
| 121 | Geeken, Dice, Godrej, Featherlite Astro Medium Back Mesh Chair with Padded Lumbar Support & Cushion Seat(Black) Designed for functionality Cushion seat and mesh bac Padded lumbar supportHeight adjustable arm rests Single lock synchro mechanism Pneumatic gas lift for different seat heights Specifications Chair Net Weight: 14.5±0.5 kg Seat Depth: 450±10mm Seat Width: 485±10mm Chair Width: 660±10mm Chair Depth: 660±10mm Minimum Chair Height: 950±10mm Maximum Chair Height:1050±10mm Minimum Seat Height: 435±10mm Maximum Seat Height: 535±10mm Arm Rest Height: 180-270mm Arm Depth: 255±10mm Width (Arm to Arm): 435±10mm Backrest Height from Seat: 520±10mm |
| 122 | CHAIR FOR CANTEEN The overall size of Chair shall be :Back width: 415mm, Back height: 380 mm, Seat width: 405mm, Seat depth: 370 mm, Seat height:455mm, Total height:805. Shell: It shall be 12 mm thick with 12 ply laminated shell. It shall be hot pressed ply - conforming to IS 303. The plywood shall fitted with metal “T” nut to have metal to metal contact for the hardware. Frame: four leg frame is made of 20mm dia tube conforming to IS – 7887. Frame is welded by CO2 welding process for uniform finish.Surface finish: Frame shall be powder coated to provide an attractive finish. It will be in grey colour. The powder coating pre-treatment is carried out with three in one chemical. After pre-treatment process, the components are powder coated for better adhesion of paint. The frames are powder coated with epoxy polyester powder to the thickness of 40-60 microns as per IS 101 and oven baked at 180° for getting scratch resistance finish.The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice, Godrej |
| 123 | The chair shall be made from a single-piece injection-molded polypropylene material with a half-round back contour to offer enhanced comfort and support. The overall width of the chair shall be 500 mm, depth 530 mm, and height 800 mm. The seat height from the floor shall range from 435 mm, and the back height from the seat shall be 400 mm. The backrest will feature a half-round contour, with a lumbar width from end to end at lumbar level shall be at least 450 mm and a top width of 430 mm. The front of the seat will include a waterfall edge with a minimum height of 25 mm. The seat width, measured from the center, shall be 440 mm, with a depth of 400 mm. The backrest will be perforated with a triangular pattern for ventilation and flexibility. Ribs beneath the seat, extending from front to back, will have a minimum height of 12 mm to enhance stability. The thickness of the chair at the various polypropylene edges shall range from 7 mm, 8mm, 9mm respectively. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice, Godrej |
| 124 | CHAIR FOR MEETING ROOM - LIBERATE MB ML ADJ ARMS - Leatherette Seat & BackThe overall size of Chair shall be : Total height 1010 to 1110 +/-5 mm, Back Width 480 mm at Top and 420mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 460+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. And over all chair width should be 615 +/-5mm and Overall chair depth should be 640 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat & back shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion- 100000 cycles over PU foam. No flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with addtional Dynaflex mechanism Two Piece Back Construction with cushion foam at 55kg/m3 density having PP back. The Chair should be provided with Synchro tilt Mechanism – with three Multi lock features. The mechanism shall allow 360 degree revolving feature along with height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment button made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the axle pin shall be rust protected zinc passivated. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Geeken, Dice, Godrej |
| 125 | OSD OFFICE + SAHAYAK +RAJASWA+SAMPATTI+ACCOUNTANT -HELIX HBThe overall size of Chair shall be height 1210 to 1330 +/-5 mm, Back Width 495 mm at Top, 385mm at bottom and 380mm at the lumber. Seat Width 500 +/-5 mm, Seat Depth 490 to 550 +/-5 mm and Seat height 480mm to 600 mm +/-5mm range. And over all chair width should be 690 +/-5mm and Overall chair depth should be 630 to 690 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with Polyester & viscose- 380 GLM, Abrasion- > 45000 cycles. The chair shall be supplied with Lenear Mesh at the back & shall be provided With 290mm width, 180mm height Headrest. Adjustable Lumbar Support full length of size 325 mm,105 mm height and 3mm thickness in contoured form can travel upto 30mm at the back . The Chair should be provided with Synchro tilt Mechanism with Multi lock features. The mechanism shall allow 360 degree revolving feature along with height adjustablility. chair shall have seat sliding mechanism.Three Way Adjustable Arms to be provied with height adjustment button made of Delrin P 500 and arm height adjustability nob shall be provided under the armrest. The mechansim shall possess seat to back recline ratio of 3:7.Tension adjustment knob shall be provided under seat. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards.The Back, Armrest and pedestal shall be provided in same Grey colour.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes.The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice, Godrej |
| 126 | Geeken, Dice, Godrej, Featherlite Optima High Back Mesh Chair with Multilock Seat Sliding Mechanism & Three Way Adjustable Arms Optima Mesh Standard (Black) Fabric Upholstered Cushion SeatMultilock with Seat Sliding Mechanism Three Way Adjustable Arms Chrome Base Specifications Weight: High Back- 19.5 kg Medium Back- 18.4 kg B136Seat: Depth- 51 cm Width- 62 cm Dimensions: Width- 62 cm Depth- 66 cm Minimum Height- 113 cm Maximum Height- 123 cm Minimum Seat Height- 57.5 cm Maximum Seat Height- 62 cm Width (Arm to Arm)- 62 cm Arm Rest Height- 18.5- 26.5cm |
| 127 | VISITOR CHAIR FOR OSD OFFICE + SAHAYAK +RAJASWA+SAMPATTI+ACCOUNTANT -HELIX MB Mid Back Chair: The overall size of Chair shall be height 1050 to 1170 +/-5 mm, Back Width 495 mm at Top and 385mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 390 to 450 +/-5 mm and Seat height 480mm to 600 mm +/-5mm range. And over all chair width should be 690 +/-5mm and Overall chair depth should be 630 to 690 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with Polyester & viscose- 380 GLM, Abrasion- > 45000 cycles. The chair shall be supplied with Lenear Mesh at the back & shall be provided With 290mm width. Adjustable Lumbar Support full length of size 325 mm,105 mm height and 3mm thickness in contoured form can travel upto 30mm at the back . The Chair should be provided with Synchro tilt Mechanism with Multi lock features. The mechanism shall allow 360 degree revolving feature along with height adjustablility. chair shall have seat sliding mechanism.Three Way Adjustable Arms to be provied with height adjustment button made of Delrin P 500 and arm height adjustability nob shall be provided under the armrest. The mechansim shall possess seat to back recline ratio of 3:7.Tension adjustment knob shall be provided under seat. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards.The Back, Armrest and pedestal shall be provided in same Grey colour.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Geeken, Dice, Godrej |
| 128 | Geeken, Dice, Godrej Featherlite Optima Medium Back Mesh Chair with Multilock Seat Sliding Mechanism & Three Way Adjustable Arms Optima Mesh Standard (Black) Fabric Upholstered Cushion Seat Multilock with Seat Sliding Mechanism Three Way Adjustable Arms Chrome Base Specifications Weight: High Back- 19.5 kg Medium Back- 18.4 kg Seat: Depth- 51 cm Width- 62 cm Dimensions :Width- 62 cm Depth- 66 cm Minimum Height- 113 cm Maximum Height- 123 cm Minimum Seat Height- 57.5 cm Maximum Seat Height- 62 cm Width (Arm to Arm)- 62 cm Arm Rest Height- 18.5- 26.5cm |
| 129 | CHAIR FOR ADHISTHAN CABIN +VIDHI DEPARTMENT+PA + MANCHITRA+J.E+PRAVARTAN ANUBAHAG ARERAJASWA + PA VC + PA + PA GDI + J.E HORICULTURE AMAZE HB The overall size of Chair shall be : width 600 +/-5mm, depth 640 +/-5mm. Total height 1170 to 1270 +/-5 mm, Back Width 425 mm at Top and 500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made up of Injection molded PPGF 20%. PU Adjustable Lumbar Support full length of size 365 mm, 110 mm height and 25mm thickness. The Chair should be provided with Self Calibrating Multilock Mechanism that should adjust the tension of the back sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon base shall be provided.Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Geeken, Dice, Godrej |
| 130 | CHAIR FOR ADHISTHAN CABIN +OSD OFFICE +VIDHI DEPARTMENT+PA CHAIR VISITOR AND WORKAREA + PA VC +PA + J.E HORICULTURE VISITORThe overall size of Chair shall be height 1020 to 1120 +/-5 mm, width should be 595 +/-5mm and depth should be 640 +/-5mm. Back Width 435 mm at Top and 490mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 465+/-5 mm and Seat height 450mm to 550 mm +/-5mm range. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh at the back rest. The back frame shall be made up of injection molded nylon GF 3. Adjustable Lumbar Support of size 300 mm lenght, 150 mm height and 3mm thickness travel upto 65mm. The Chair should be provided with Snchyro mechanism with single lever with one position lock. The mechanism shall allow360 degree revolving feature along with height adjustablility one Way with height adjustment button made of Delrin P 500 & arm top shall be PU material. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength. Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark.Geeken, Dice, Godrej |
| 131 | CHAIR FOR CAO ROOM MAIN + VC OFFICE SPRING WOOD Total height 1210 to 1280mm. High back Chair having back height of 770 +/-5mm and width of 380 +/-5mm from top & 500 from mid (lumbar) level. Seat Depth shall be 480 +/-5mm and seat width shall be 540 +/-5mm at front & 450 +/-5mm at back. Armrest to Armrest distance of 680 +/-5mm. Seat height shall range between 410 mm to 470 mm. Armest shall be finished with foam & leather on the user side & top with water fall edge to provide comfort to user & outside of armrests as well as below back shall be finished with wooden texture. Below portion of armrest opening towards seat shall be finished with crome surface. Knee tilt mechanism shall be provided having tilt tension adjustment & height adjustment at same level on right hand side of user & any position locking level at the left hand side of user. Padded lumber support to be provided of height minimum 200 mm. Back of the chair shall be finished with leather upto height of 600 mm & wooden texture finish upto 200 mm & leather below the wooden texture. Aluminium die cast pedestal having length of prongs 310 mm with 50 mm height towards centre & 25 mm height outside. High Quality leather in beige or black to be suppiled. Twin wheel castors to be provided.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice, Godrej |
| 132 | VISITOR CHAIR FOR CAO ROOM MAIN + VC OFFICE- SPRING WOOD Total height 1210 to 1280mm. High back Chair having back height of 770 +/-5mm and width of 380 +/-5mm from top & 500 from mid (lumbar) level. Seat Depth shall be 480 +/-5mm and seat width shall be 540 +/-5mm at front & 450 +/-5mm at back. Armrest to Armrest distance of 680 +/-5mm. Seat height shall range between 410 mm to 470 mm. Armest shall be finished with foam & leather on the user side & top with water fall edge to provide comfort to user & outside of armrests as well as below back shall be finished with wooden texture. Below portion of armrest opening towards seat shall be finished with crome surface. Knee tilt mechanism shall be provided having tilt tension adjustment & height adjustment at same level on right hand side of user & any position locking level at the left hand side of user. Padded lumber support to be provided of height minimum 200 mm. Back of the chair shall be finished with leather upto height of 600 mm & wooden texture finish upto 200 mm & leather below the wooden texture. Aluminium die cast pedestal having length of prongs 310 mm with 50 mm height towards centre & 25 mm height outside. High Quality leather in beige or black to be suppiled. Twin wheel castors to be provided.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Geeken, Dice, Godrej |
| 133 | CHAIR FOR MEETING ROOM - AMAZE MBThe overall size of Chair shall be width 600 +/-5mm, depth 640 +/-5mm. Total height shall be 995 to 1095 +/-5 mm, Back Width 425 mm at Top and 500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat shall be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made up of Injection molded PPGF 20%. Adjustable Lumbar Support made up of PU having size 365 mm x 110 mm x 25mm thick shall be provided for better comfort. The Chair should be provided with Self Calibrating Multilock Mechanism (Bio Snchyro mechansim) that should adjust the tension of the back sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. The Product shall be Greenguard UL certified and India Design Mark certified. One Way Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base shall be provided.Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Geeken, Dice, Godrej |
| 134 | CHAIR FOR SECETARY MAIN + CHEF ENGINEER - LIBERATE HBThe overall size of Chair shall be : Width 660mm , Depth 660mm & Height 1250 to 1350 mm. Seat Size shall be : width 490mm, Actual depth 520mm, Effective depth 430mm and height 475mm to 575mm. Width of the back shall be 425mm at bottom & Lumbar level 440mm & min 480mm at shoulder level. Back height shall be 690mm as measured from seat level. The chair shall be supplied with high quality Mesh at the back. Back outer shall be injection moulded with Nylon GF30% material. Seat should be made up of foam pre moulded at 55 kg/m3 density & hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. The Product shall be Greenguard UL certified. The chair shall be supplied with Dynaflex Two Piece Back Construction with IS20D Mesh upholstred. Back shall be provided With 260mm width, 160mm height and 50mm height adjastable Headrest Thickness of seat foam shall be 55 mm. Seat shall be upholstered with micro fabric 100% polyster 180 GSM having abrasion > 50000 cycles fire rated fabric confirming to BS EN 1021. Plywood used shall be 12mm thick 9 ply hot pressed. The Chair should be provided with Synchro tilt Mechanism allowing 360 degree revolving movement along with height adjustablility & tilt tension. The mechansim shall allow seat to back recline ratio of 2:5. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Height adjustable Arms to be provied operated through button made of Delrin P 500. Arm pad material shall be polyurethane with 2mm metal insert. Nylon Base having PCD of 660mm five pronged base made up of PA6, 30% glass filled reincforced with bottom ribbing to be provided. 50mm dia twin castors with PA6 material to be provided.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Geeken, Dice, Godrej |
| 135 | CHAIR FOR SECETARY MAIN + CHEF ENGINEER - AMAZE MBThe overall size of Chair shall be width 600 +/-5mm, depth 640 +/-5mm. Total height shall be 995 to 1095 +/-5 mm, Back Width 425 mm at Top and 500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat shall be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made up of Injection molded PPGF 20%. Adjustable Lumbar Support made up of PU having size 365 mm x 110 mm x 25mm thick shall be provided for better comfort. The Chair should be provided with Self Calibrating Multilock Mechanism (Bio Snchyro mechansim) that should adjust the tension of the back sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. The Product shall be Greenguard UL certified and India Design Mark certified. One Way Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base shall be provided.Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Geeken, Dice, Godrej |
| 136 | MAIN CHAIR FOR A.E+ATP+TP ROOM + A.E HORTICULTURE ALL High Back Chair Yoma HB leatherite High back Chair having overall height 1200-1300mm, back height of 790 mm from seat level and width of 460 mm from top & 520 from mid (lumbar) level. Seat Depth shall be 490 mm and adjustable upto 530mm. Both the seat and backrest shall feature PU cushions upholstered with body touch leatherite on all user contact points. seat width shall be 520 mm measured at centre of the seat. Seat height shall range between 430 mm to 520 mm. Armest shall be finished with foam & leatherite on the top & the structure of the armrest shall a die cast aluminium with buffed finish & fixed with the seat below.The chair shall have seat depth adjustment with a lever operated sliding mechanism The length of the top of the arm shall be 250 mm & width of 60 mm. The synchro mechanism shall be provided having 3 position multilocking & seat adjustable on the left hand side and height adjustment on the right hand side of the user.The mechanism shall allow 360 degree revolving feature along with height adjustablility. Aluminium die cast pedestal having length 5 twin 60 mm wheel castors heavy duty shall be provided. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. tolerance of 25mm for seat & back size to be considered. The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date Geeken, Dice, Godrej |
| 137 | VISITOR CHAIR OR FOR A.E+A TP+TP + A.E HORICULTURE ROOM ALL Medium Back Chair (Leatherite) YOMA MB Medium back Chair having overall height 1050-1150mm, back height of 590 mm from seat level and width of 460 mm from top & 520 from mid (lumbar) level. Seat Depth shall be 490 mm and adjustable upto 530mm. seat width shall be 520 mm measured at centre of the seat. Seat height shall range between 430 mm to 520 mm. Armest shall be finished with foam & leatherite on the top & the structure of the armrest shall a die cast aluminium with buffed finish & fixed with the seat below. The length of the top of the arm shall be 250 mm & width of 60 mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat, back & headrest shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion-100000 cycles over PU faom. The synchro mechanism shall be provided having 3 position multilocking & seat adjustable on the left hand side and height adjustment on the right hand side of the user.The mechanism shall allow 360 degree revolving feature along with height adjustablility. Aluminium die cast pedestal having length 5 twin 60 mm wheel castors heavy duty shall be provided. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. tolerance of 25mm for seat & back size to be considered. The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice, Godrej |
| 138 | CHAIR FOR DRAFTMAN+TYPIST+STENO + VISITOR CHAIR FOR MAIN DESK+JE Geeken, Dice, Godrej, Featherlite Astro Medium Back Mesh Chair with Padded Lumbar Support & Cushion Seat(Black) Designed for functionality Cushion seat and mesh bac Padded lumbar support Height adjustable arm rests Single lock synchro mechanism Pneumatic gas lift for different seat heights Specifications Chair Net Weight: 14.5±0.5 kg Seat Depth: 450±10mm Seat Width: 485±10mm Chair Width: 660±10mm Chair Depth: 660±10mm Minimum Chair Height: 950±10mm Maximum Chair Height: 1050±10mm Minimum Seat Height: 435±10mm Maximum Seat Height: 535±10mm B148Arm Rest Height: 180-270mm Arm Depth: 255±10mm Width (Arm to Arm): 435±10mm Backrest Height from Seat: 520±10mm. Make Geeken, Dice, Godrej |
| 139 | CABIN CHAIR FOR MAIN DESK+JE Geeken, Dice, Godrej, Featherlite Astro High Back Mesh Chair with Padded Lumbar Support & Cushion Seat(Black) Designed for functionality Cushion seat and mesh back Padded lumbar support Height adjustable arm rests Single lock synchro mechanism Pneumatic gas lift for different seat heights Chair Net Weight: 15.4±0.5 kg Seat Depth: 450±10mm Seat Width: 485±10mm Chair Width: 660±10mm Chair Depth: 660±10mm Minimum Chair Height: 1175±10mm Maximum Chair Height: 1275±10mm Minimum Seat Height: 435±10mm Maximum Seat Height: 535±10mm Arm Rest Height: 180-270mm Arm Depth: 255±10mm Width (Arm to Arm): 435±10mm Backrest Height from Seat: 520±10mm |
| 140 | CBAIN CHAIR FOR E.E 2 +1 -INDIGO HB LEATHER The overall size of High back shall be : Back width : 480mm , Total height : 1150 to 1250 mm, Back height- 755 mm. Seat width : 490 mm, Seat depth : 480 mm, Seat height : 455 to 555 mm. Arms & back: It shall bea molded shell with MS frame and upholstered with leathere. Leather upholstery: Shell shall be upholstered with 75% PVC & 25% polyester – 640 GSM, Abrasion- 100000 cycles. Foam: Cushion with pre moulded foam of 65 kg/m3 density in the shape of the mold. Hardness – 22 ± 3 kgf. Seat: upholstery : Seat shall beupholstered with leatherette. Leatherette upholstery: Shell shall be upholstered with 75% PVC & 25% polyester – 640 GSM, Abrasion- 100000 cycles Foam: Cushion with pre moulded foam of 65 kg/m3 density in the shape of plywood. Hardness – 18 ± 3 kgf. Ply wood: 12 mm thick with 9 ply. It shall behot pressed ply - conforming to shall be303. The plywood shall befitted with metal “T” nut to have metal to metal contact for the hardware used for fixing the mechanism. Thshall betechnology ensures long and efficient and safe functioning of the chair without any shake and play in the long run. The seat profile shall bedesigned with water fall to provide necessary comfort in popliteal region.Mechanism: Synchro tilt Mechanism – NBA 005 mechanism offered in Multi lock features. Thshall be mechanism shall be manufactured out of cold Rolled Carbon Steel shall be 513-1994 Sheets, the steel components are manufactured with highly precision tools for accuracy in matching other parts for smooth functioning. The taper angle should match with the taper angle of gas lift swaging-- 1°26’16”.Gas lift: : Single swage Class 4 tested -ANSI BIFMA performance standards. The pneumatic height adjustment has an adjustment stroke of 95 -100 mm as per the seat height criteria and 360° revolving.Base: The 660mm PCD (26 inches) five pronged base shall be made out of Aluminium. The base Outer diameter shall be 750 mm with casters.Casters : Twin Casters 60mm dia with Nylon material complying to ANSI / BIFMA X 5.1 – 2017 standards. The axle pin shall be rust protected- Zinc passivated. The pin shall be designed to have push fit with lock ring.Geeken, Dice, Godrej |
| 141 | High Back * Height adjustable Manager Chair * Breathable Top grain leather upholstery * Thick Double Layer board Design, Strong Supports * Solid Wood armrest with leather upholstery * Down feather surface+High Density Foam, More comfortable than tranditional chairs * Title Mechanism with 4 position lock * Solid wood base, * 60 Distance TUV4 gaslift *60 mm PU castors past BIFMA Testing. Make Geeken, Dice, Godrej |
| 142 | VISITOR CHAIR FOR E.E 2 +1 -INDIGO HB LEATHER The overall size of Dimensions: Medium back : Back width : 490mm , Total height : 935 to 1035 mm, Back height- 550 mm. Seat width : 490 mm, Seat depth : 480 mm, Seat height : 455 to 555 mm. Arms & back: It shall be molded shell with MS frame and upholstered with leather. Leather upholstery: Shell shall be upholstered with 75% PVC & 25% polyester – 640 GSM, Abrasion- 100000 cycles. Foam: Cushion with pre moulded foam of 65 kg/m3 density in the shape of the mold. Hardness – 22 ± 3 kgf. Seat: upholstery : Seat shall beupholstered with leatherette. Leatherette upholstery: Shell shall be upholstered with 75% PVC & 25% polyester – 640 GSM, Abrasion- 100000 cycles Foam: Cushion with pre moulded foam of 65 kg/m3 density in the shape of plywood. Hardness – 18 ± 3 kgf. Ply wood: 12 mm thick with 9 ply. It shall behot pressed ply - conforming to shall be303. The plywood shall befitted with metal “T” nut to have metal to metal contact for the hardware used for fixing the mechanism. Thshall betechnology ensures long and efficient and safe functioning of the chair without any shake and play in the long run. The seat profile shall bedesigned with water fall to provide necessary comfort in popliteal region. Mechanism: Synchro tilt Mechanism – NBA 005 mechanism offered in Multi lock features. Thshall be mechanism shall be manufactured out of cold Rolled Carbon Steel shall be 513-1994 Sheets, the steel components are manufactured with highly precision tools for accuracy in matching other parts for smooth functioning. The taper angle should match with the taper angle of gas lift swaging-- 1°26’16”.Gas lift: : Single swage Class 4 tested -ANSI BIFMA performance standards. The pneumatic height adjustment has an adjustment stroke of 95 -100 mm as per the seat height criteria and 360° revolving. Base: The 660mm PCD (26 inches) five pronged base shall be made out of Aluminium. The base Outer diameter shall be 750 mm with casters.Casters : Twin Casters 60mm dia with Nylon material complying to ANSI / BIFMA X 5.1 – 2017 standards. The axle pin shall be rust protected- Zinc passivated. The pin shall be designed to have push fit with lock ring.The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice, Godrej |
| 143 | CHAIR FOR LIBERARY AREA - The overall size of Chair shall be :Back width: 415mm, Back height: 380 mm, Seat width: 405mm, Seat depth: 370 mm, Seat height:455mm, Total height:805. Shell: It shall be 12 mm thick with 12 ply laminated shell. It shall be hot pressed ply - conforming to IS 303. The plywood shall fitted with metal “T” nut to have metal to metal contact for the hardware. Frame: four leg frame is made of 20mm dia tube conforming to IS – 7887. Frame is welded by CO2 welding process for uniform finish.Surface finish: Frame shall be powder coated to provide an attractive finish. It will be in grey colour. The powder coating pre-treatment is carried out with three in one chemical. After pre-treatment process, the components are powder coated for better adhesion of paint. The frames are powder coated with epoxy polyester powder to the thickness of 40-60 microns as per IS 101 and oven baked at 180° for getting scratch resistance finish.The OEM of furniture shall have following certifications ISO 9001, ISO 14001, BIFMA Level 2, AIOTA, IGBC Gold rated factory certification, India Design Mark. All certifications must be current and valid on or before the tender due date.Approved makes are Herman Miller, Haworth, Steelcase & Featherlite, Geeken, Dice, Godrej |
| 144 | Supplying and drawing following core Fiber Optic Cable having corrugated steel armoring. The Fiber should be SM Fiber Central -loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC G.652D and Telecordia GR-20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should be – 5 0C to +50 0C and Storage Temperature shall be – 5 0C to +50 0C, Max Attenuation ± 0.36 (db / km) at Operational Wavelength 1310 nm and ± 0.22 db / km at Operational Wavelength 1550 nm. type of fiber should be 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. The value for Mode-filed, Cladding Diameter 9.2 ± 0.4 µm and 125 ± 0.7 µm correspondingly. The Dispersion value < 3.5 < 18 ps/nm-km and PMD value < 0.2 ps/km and Cable Cutoff wavelength < 1260 nm i/c splicing & marking etc complete as required Single Mode 12 Core Optical fiber cable |
| 145 | Supplying and drawing following core Multi mode Fiber Optic Cable having corrugated steel armoring, leser optimize 50/125 µm with HDPE jacket, LSZH (Low smoke Zero Halogen), Tight-buffered or loose tube, maximum attenuation: < 3.5 dB/km at 850 nm, < 1.5 dB/km at 1300 nm, bandwidth > 2000 MHz-km at 850 nm, > 500 MHz-km at 1300 nm compliance and certifications: ISO/IEC 11801 Ed. 2.2, ANSI/TIA-568- C.3, ITU-T G.651.1 RoHS compliant. Multi Mode Fiber shall be Central-loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793- 1/60794-1-2, ITU-T-REC G.652D and Telecordia GR- 20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should be – 5 0C to +50 0C and Storage Temperature should be – 5 0C to +50 0C, Maximum Attenuation ± 3.5 dB/km at Operational Wavelength 850 nm and ± 1.5 dB / km at Operational Wavelength 1300 nm . type of fiber should be 50/125 / G.652D & Refractive Index should be 1.483/1.478, The value for Mode-filed,Cladding Diameter 50 ± 2.5 µm and 125 ± 1µm correspondingly i/c splicing & marking etc complete as required. 6 Core Multi Mode Optical Fiber Cable |
| 146 | Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber 12Port LIU |
| 147 | 24Port LIU |
| 148 | Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. Copper Patch Cords of length 3m (10ft) |
| 149 | Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, NonPlenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc.complete as required 1 Run of cable |
| 150 | Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. |
| 151 | Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel.24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. |
| 152 | Supplying and fixing 42U Rack with 6 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1.6mm CRCA Sheet with removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 8nos two line cable entry/exit provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or perforated door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. |
| 153 | Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 6U Rack |
| 154 | Supply, Installtion, Testing and Comissioning of 12U wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos of hardware pkts., 6 Socket PDU with MCB as per technical specification.. |
| 155 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet |
| 156 | Supplying, installation, Testing and commissioning of following capacity 24 port Layer 3 Network Switch having features and specifications etc. as mentioned here under: At least 20 X RJ-45 Gigabit Ethernet Ports and additional 4 combo 10/100/1000 base-t/SFP Ports with additional 4 SFP+ ports non-blocking architecture by having Switching capacity of min. 128Gbps and packet forwarding rate of 95Mpps or higher, 16K MAC table. Console Port, USB port, Internal AC Power supply with operating temperature of 0 to +50 0C. Stacking port with stacking support of minimum 8 units per stack. 48K Mac address, 9K or more Jumbo frame, ERPS with enabling ring to converge in less than 50 ms from node or link failure, Static routing, Static, 6to4, ISATAP and GRE, IPv6 Neighbor Discovery (ND), BGP, ISIS, MPLS, VRRP v2, OSPFv2/v3, PBR, Route Redistribution, RIPv1/v2/ng, IP Helper all L3 Protocols should support from day 1 for both IPv6 and IPv4, 802.1x, Port security , Radius C TACACS+ authentication C accounting, DAD, DAI, DoS attack prevention, SSH, Guest VLAN, IP Access List, MAC Access List. Multicast: VLAN, PIM-SM, PIMDM, PIM- SDM, PIM-SMv6, DVMRP v3 and MSDP, IGMP C MLD Snooping, Flow mirroring, IGMP C MLD Snooping Ǫuerier, Per-VLAN IGMP C MLD Snooping. SNMP, Dual configurations, Multiple images, RMON, LLDP/LLDP-MED, sFlow, DHCP/BOOTP Client, IPv4/IPv6, Syslog server, Debug command, 802.3ah Ethernet Link OAM, 802.1ag Connectivity Fault, Y.1731 OAM, 802.1Ǫbb Priority- based Flow Control (PFC), Dying Gasp, Cable Diagnostics , 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. |
| 157 | Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. |
| 158 | 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. |
| 159 | Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet. forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD. Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snopping, Server, server. Screening. RADIUS , TACACS+ Authentication, ǪoS: 802.1P, 8 queues per port, ǪoS : WRR, Strict+WRR, WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based. route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each copper port supporting 802.3at PoE+ min |
| 160 | 24 port Layer 2 Non-PoE Network Switch |
| 161 | Supply, Installation, Testing & Commissioning of Access switch Should have minimum 48 X 10/100/1000 BaseT PoE/PoE+ RJ45 Ports (minimum 740W) plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members, Should have compatibility to work in atmospheric tempemperature range -5 degree C to 50 degree C. |
| 162 | Supply, Installation, Testing & Commissioning of Access switch should have 16 x 10/100/1000 BaseTPoE/PoE+ RJ45 Ports (minimum 250W) plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have dedicated 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members. Switch should have dedicated 1 x 10/100/1000 BaseT port for Out of band Management port. Should have compatibility to work in atmospheric temperature range -5 degree C to 50 degree C. |
| 163 | Supply, Installation, Testing & Commissioning of Access switch should have 48 X 10/100/1000 BaseT RJ45 Ports plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have dedicated 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members. Switch should have dedicated 1 x 10/100/1000 BaseT port for Out of band Management port. Should have compatibility to work in atmospheric temperature range-5 degree C to 50 degree C. |
| 164 | Supply, Installation, Testing & Commissioning of Access switch should have 16 x 10/100/1000 BaseT RJ45 plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have dedicated 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members. Switch should have dedicated 1 x 10/100/1000 BaseT port for Out of band Management port. Should have compatibility to work in atmospheric temperature range -5 degree C to 50 degree C. |
| 165 | Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for High density use having features and specifications etc. as mentioned here under- WiFi6 802.11ax 574Mbps (2.4GHz) + 2402Mbps (5GHz), WIFI 6 Certified, 1 x RJ45 console port, MG 2.5G LAN POE Port, factory reset, WPA/WPA2/WPA3™ Personal/Enterprise, WEP 64/128-bit, SSID broadcast disable, MAC address access control, Internal RADIUS server, SNMP, Customizable Captive Portal, Auto Channel, Works as Access Point, WDS, WDS with AP, Wireless Client ., Web (HTTP), Secure Socket Layer (SSL), Traffic control, Support ATF/Fast Roaming/Band Steering, Supports enhanced security – WPA-PSK/WPA2- PSK/WPA3-PSK and RADIUS client, and Cipher negotiation, and MAC/ IP ACL for networks, Certifications: MTCTE, CE, FCC. Works as Standalone, Compatible with S/W & H/W Controller with addtional features like - Real-Time Monitoring and Alerts, Rich Advanced Features, Centralized Device Management, Role-Based Administration, Real-Time Monitoring, VLAN and Access Control, Auto RF Management and Bandwidth Optimization, Multi-SSID and Captive Portal Authentication.OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. |
| 166 | Supplying, Installation, Testing and Commissioning of Web based Access Control Enrolment and Device Configuration Software, Should be independent of OS (Windows), Unified Management of Biometric, Card, and Controllers, Import Functionality for bulk user details, Biometric Template Retrieval for Data Recovery, User Management, Logs and Terminal Management, Support for IP-based and USB Biometric Devices, User-specific Access Policies, Different User Policies on the Same Terminal, Assignment of Specific Access Schedules, Pushing Users to Terminals or Groups, Admin Authority Management to define rights of each user to perform, Blacklist User Management, Access Schedule Creation, Real-Time Log Retrieval, Real- Time User Identification, Secure Storage of Biometric/Users Data, Capable to integrate with 3rd party applications over Web API's, MQTT protocol support |
| 167 | Supply, Installation, Testing and Commissioning of PC with 32\\" Monitor as per following specifications: Server Specification for Access Control Software- Processor - Intel® Xeon® X5670, 2.93GHz, 12M Cache, Turbo, HT, 1333MHz, OS - Genuine Windows XP/7 Colour Monitor - 17\\" Flat Panel LCD Monitor, RAM - 4GB DDR2, 667MHz SDRAM, Memory - 500 GB HDD, Graphic Card - Integrated Intel Graphics Media Accelerator X3100 Two(2) PCI-X and Two(2) PCI-Express Expansion Slots 2/4 USB, 2 serial, and 2 VGA Adaptor, CD/DVD ROM.; USB Keyboard and Mouse Dual Channel Internal Ultra320 SCSI Integrated RAID-1 with hot-spare, Dual Integrated 10/100/1000 Ethernet NIC I/O Expansion Option |
| 168 | Supply, Installation, Testing and Commissioning of controller shall be a 32 bit microprocessor with Linux OS. The controller shall have 128 MB DDR SRAM and 64 MB Flash memory. Support minimum 2 doors with a readers for entry and exit. Support minimum 16 standard Weigand Interface on LONbus. Support minimum 64 I/Os with expandable 4 DI/DO modules on LONbus. Controller level redundancy with Hot Redundant Controller failover without manual intervention. The access controller shall support minimum Card Holder Memory: 1,00,000 card holders, expandable upto 2,50,000 card holders. The controller shall support minimum 100000 transaction buffer and 10000 event buffer. The controller shall have autonomous clock/calender with geographic time zone support and daylight saving. The controller shall have on-board 10/100MB Ethernet connection for TCP/IP connectivity. Controller shall have built-in web server and support web access. Shall perform in a peer to peer network with other controllers. Controller shall have IPSEC with 3DES encryption on LAN communication. Controller shall have Tamper protection feature. |
| 169 | Supply, Installation, Testing and Commissioning of contact-less smart card reader with Read Range- upto 5cm, Mounting- Mullion, Operation Frequency- 13.56MHz, Reader Output- Wiegand, Card Compatibility- 2KByte, 4KByte I - Class smart cards, Mifare and DESFire. Environmental Rating- IP55, Operating Temp: -35º to 65º C, Operating Humidity: 5% to 95% relative humidity non-condensing, Power Rating: 5-16VDC, 55mA AVG Current, Certification: CE, UL, FCC |
| 170 | Supplying, Installation, Testing and Commissioning of Electromagnetic locks (fail safe type) for following type of Doors suitable for operation on 12 V DC having holding force 600 lbs for Single Leaf Door and 1200lbs for Double leaf door with suitable feedback i/c connection complete etc. as required. Single leaf door |
| 171 | Double leaf door (Each leaf 600lbs & Total 1200 lbs) . |
| 172 | Supplying, Installation, Testing and Commissioning of Heavy Duty SS Finish Exit Push Button for releasing access doors with all necessary installation accessories i/c connection complete etc. as required. |
| 173 | Supplying and Laying including termination testing and Commissioning of following sizes of cable on surface/ recess/ existing cable tray/ conduit etc. complete as required. 3x1.5sqmm power twisted pair copper cable. |
| 174 | SITC of 8 Conductor, 18-24 AWG, Overall Shielded, PVC for Card Readers Description : Shielded multi conductor control cable Conductors : 18/22 AWG 7/32 Strand Tinned Copper, 6 conductors Insulation : Colour coded PVC 0.010\\" Colour Code : Black, white, red, green, blue, brown Shielding : 100% aluminium mylar foil shield overall with a 24 AWG 7/32 strand tinned copper drain wire. Jacket : Gray flame retardant PVC 0.032\\" Nominal OD : 0.205\\" Capacitance : 33 pF/Ft between conductors Ratings : Manufactured in accordance with UL subject 13, type CM Passed UL VW-1 Flame Test UL CM approved |
| 175 | SITC of 2 Pair, 18 AWG, Individually Shielded, Poly propyene Insulated Signal Cable for Intelligent Controller Communication.Description : 2 pair individually shielded cable Conductors : 18 AWG 7/30 Strand tinned copper, twisted into 2 pairs Insulation : Colour coded polypropylene, 0.008\\"Colour Code : Black with red, Green with white Shielding : Each pair individually shielded with 100% aluminium mylar foiled shield plus 22 AWG 7/30 strand tinned copper drain wire.Jacket : Gray flame retardant PVC Nominal OD : 0.170\\" Capacitance : 35 pF/Ft Voltage : UL rated 300 Volts Ratings : Manufactured in accordance with UL subject 13, type CM Passed UL VW-1 Flame Test UL CM approved |
| 176 | Supply, Installation, Testing & Comissioning of Boom Barrier with Application: Outdoor, Drive: Block able Continuous Torque Motor, Version: Left handed (changeable to Right Hand), Logic Control: Included, Intelligence: The use of Block able Torque Motor Drive with continues torque Output and the microprocessor based controller eliminates the need for friction clutches to ensure maintenance free operation. The barrier may be installed at any position. Power Supply: 230 +/-10% VAC, 50Hz. Colour: Different and distinct colour pattern as decided by owner. The paint used will be anti-corrosive and luminous for night and bad weather. Boom Specifications: straight or articulated -extruded aluminium alloy. Boom with octagonal profile (straight and articulated 100mm x 55mm x 1.6mm. Housing Dimension: W300mm, D 350mm, H1040mm, Protection: All Housing and internal parts will be rust & corrosion free metals or alloys of high strength with suitable Epoxy coating as applicable. Opening: 1.4 seconds for 6 meters long Boom Barrier. Closing Time: Should be 1.4 Sec approx. Power-Off: Manual Opening Possible, Operation: Push button type for electro-mechanical operation to open and close the Boom Barrier, Duty Cycle: 100% up to 3 meter Electromechnical Boom barrier with loop sensor /beam sensor & boom resting post vehicle access barrier & all accessories complete as required as per specifications |
| 177 | PUBLIC ADDRESS SYSTEM Supply, Installation, Testing & Commissioning of UL/EN-54 Certified IP based EVAC PA controller capable of adding 6 zones in the system and expandable upto 10 zones with 14 x 4 Audio matrix with full DSP functionality. 8 audio inputs, 4 audio outputs, 4 channel output matrix. Shall support amplifier redundany, 12 speaker line outputs. 8000 fault, warning and event conditions log. Built in message manager for 100 emergency/business calls up to 85 minutes. 18 control inputs and 19 control outputs. Impedance measurement and Pilot Tone supervision for speaker line monitoring. The controllers shall be able to exchange audio signals over the network without the need of a running PC/server, software dependent solutions shall not be accepted. Multiple controllers can be networked over IP using Dante audio up to 16 digital audio input signals and 16 digital audio output channels with low latency.Audio flows Up to 16✕16 simultaneous audio streams @ 48kHz. Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB), Signal-to-noise ratio (A-weighted): Line in to line out: 106 dB typical, THD+N < 0.05%, Sample rate 48 kHz, DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing. |
| 178 | Supply, Installation, Testing & Commissioning of UL/EN-54 certified 1x500W Class, high efficiency amplifier. 70/100V loudspeaker output voltages, 4 automatic selectable audio inputs , local input for audio source. THD ≤1%. Frequency response, ref. 1 kHz, rated load, -3 dB : 50 Hz to 25 kHz. Signal-to-noise ratio (A-weighted) > 104 dB. Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage protection, DC supply undervoltage protection, inrush current limiter, ground fault. |
| 179 | Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required |
| 180 | Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required. |
| 181 | Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Single pair, 2-core, 1.5 sqmm |
| 182 | speaker cable Four pair, 2-core, 1.5 sqmm |
| 183 | SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM Supplying installation testing and commissioning of Grid interactive roof top solar photo voltaic power generation system including all the required accessories like Solar PV module, Grid Tie invertor, arrey junction box, cabling & wiring, earthing, surge protection device, FRLSame structure for mounting of solar panel. The cell shall be poly crystaline silicon cells of 6 inch each and module efficiency shall be more than 17%. Solar module shall have linear output warranty with degradation not exceeding 0.7% FRLSom 2nd Year onwards. Minimum 80% power output must be assured at end of 25 years. The FRLSont glass of solar module shall be low iron tempered glass ARC type. Termination box shall be Thermo-plastic, IP 67 or better, UV resistant with built-in-bypass. The nominal power of a single PV module shall be minimum 325 Wp or higher. Positive power tolerance modules only to be used. RF identification tag for each solar module shall be provided inside the module and must be able to withstand environmental conditions. The solar panel shall be complience of IEC 61215, IEC 61730 certified by TUV Rheinland / UL. The solar panel shall be installed as per BOQ & detailed technical specification. |
| 184 | 25 KVA UPS WITH 30 MINUTES BATTERY BACKUP Supply, installation, testing & commissioing of 25 KVA UPS in paralleling mode at 0.99 input power factor as per specification given in the document with following broad features and as per NIT technical specification. THD(i) shall be less than 3% in the entire loading range. UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 60 sec. Three Phase Input and Three Phase Output. (Input - 340V - 470V, Three Phase, 4 wire. / Output - 400-415 Volt, Three Phase, 4 Wire.) Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be external type with rack and suitable for 30 minute backup on 100% load.UPS shall be compatible for minimum 4 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS. Suitable size cable from UPS to battery bank. UPS described as above |
| 185 | Supply, installation, testing & commissioning of MCCB / MCB in Sheet Steel enclosure made out of 2 mm thick CRCA sheet suitable for 1 phase 2 wire 50Hz AC system complete with MCCB / MCB suitable for incoming & outgoing termination including power coating etc. complete as per specification & as required. 40 Amp FP Moulded Case Circuit Breaker. |
| 186 | Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24X0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 187 | P/F acoustical false ceiling with perforated Gypsum board(India Gysum) of size 1200x2400mm, with an overlay of 50mm thick 1000gsm non wooven polyster wedding insulation as marked in the drawings, consisting of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending GI intermediate channels of size 45mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angles of width 25mm x 10mm x 0.55mm thick fixed to soffit with GI cleats and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in a direction perpendicular to the intermediate channel at 457mm c/c. 12.5mm tapered egge gypboard (confirming to IS: 2095-1996: Part-I) is then screw fixed to ceiling section with 25mm drywall screws at 230mm c/c. Screw fixing is done mechanically with drilling machine with suitable attachment. The joints of the panels are to be repaired by jointing compound and finishing with 2 or more coats of acrylic emulsion paint. |
| 188 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (with VTPNDB - Incammer) 100 A, 30 KA,FP MCCB (using for both 100A, 63A, 80A & 40A) |
| 189 | 125 A, 36 KA,FP MCCB |
| 190 | 200 A, 36 KA,FP MCCB(including 160 A) |
| 191 | 250 A, 36 KA,FP MCCB |
| 192 | Supplying, Installation, Testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 3 meter and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. |
| 193 | Supplying, Installation, Testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor with day light dimming(lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection.) having high performance, regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 3 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required |
| 194 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature ise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 195 | MIRROR LIGHT Supply, Installation, Testing & Commissioning of 2ft length, 10W LED Mirror luminaire wall mounted delivering minimum system lumen of 1100 lumens & the luminaire shall be with system efficacy 110 lm/W. The luminaire Housing shall be made of extruded aluminium & the diffuser shall be of PMMA/PC. The operating CCT shall be 6500K with CRI of ≥80, SDCM<5. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.95. LED Life with L70 Criteria should be 50,000 hours. IP20 protection. The LED Driver shall be easily available in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2.5KV. The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. |
| 196 | Supply, Installation, Testing & Commissioning of 5mtr IP20 flexible LED strip/ cove light made of Polymide double sided PCB, Strip should have minimum efficacy at System level >=70lumens/watt with nominal system lumens 700lm/mtr, Life of LED strip : 35000 burning Hrs. @ (ta 45 C) @L70 Lumen maintenance , CCT of 3000K, CRI Ra >=80, an operating Voltage Range of 100 - 300 VAC, and surge protection of 3KV. |
| 197 | Supply, Installation, Testing & Commissioning ing and fixing of 250 mm sweep decorative Fresh air fan, power consumption 36W, speed not less than 1200 RPM, Air Delivery not less than 860 CMM, (PVC Body Heavy Duty) with all accessories suitable for operation single phase 230 volt 50 cycle per second per sec. AC Supply, Installation, Testing & Commissioning etc. as required. in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning earthing etc. as required. |
| 198 | Supply of Specially designed step light foot light LED 3000K 220-240Vac CRI > 80 Input power:5.5-6W. Electronic driver ON/OFF CE mark. IP rating IP 65/66 and impact resistance IK07.MATERIAL CHARACTERISTICS metal and plastic housing with polycarbonate UV-resistant optical cover, aluminum and black/grey colour. |
| 199 | Supply, Installation, Testing & Commissioning , Installation, Testing & Commissioning of Exit Signages (2 hour battery backup) including all fixing arrangement complete as required. |
| 200 | Supply, Installation, Testing & Commissioning of 30W LED SUSPENDED 4ft LINEAR PROFILE Supply of IP20 (UP/DOWN) linear suspended standalone fitting made of extruded aluminium housing and is should have high transmissive Egg Crate diffuser (UGR<19). Fixture should have minimum efficacy at System level (Not Chip Level) >145lumens/watt (SDCM<3) and maximum system wattage of 30-40W. Fixture should have office complaince i.e UGR<19 and light distribution as per LG7 guidelines i.e 70% UP and 30% Down. Luminaire should have Life of 50000hrs@L70 Lumen maintenance at 45deg C ambient temperature, CCT up to 5700K, IP20, IK02, CRI >90, PF >0.95, THD<10% at full load and an operating Voltage Range of 150 - 270 Internal Surge Protection 2KV, flicker-free. The fixture should comply with the parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Including 3 core 1.5 sq.mm. |
| 201 | 30W LED SUSPENDED 4ft LINEAR PROFILE (DIMMABLE) Supply, Installation, Testing & Commissioning of IP20 (UP/DOWN) DALI dimmable linear suspended standalone fitting made of extruded aluminium housing and is should have high transmissive Egg Crate diffuser (UGR<19). Fixture should have minimum efficacy at System level (Not Chip Level) >145lumens/watt (SDCM<3) and maximum system wattage of 30-40W. Fixture should have office complaince i.e UGR<19 and light distribution as per LG7 guidelines i.e 70% UP and 30% Down. Luminaire should have Life of 50000hrs@L70 Lumen maintenance at 45deg C ambient temperature, CCT up to 5700K, IP20, IK02, CRI >90, PF >0.95, THD<10% at full load and an operating Voltage Range of 150 - 270 Internal Surge Protection 2KV, flicker-free. The fixture should comply with the parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Including 3 core 1.5 sq.mm. |
| 202 | 18/24W RECESS DOWNLIGHTER (DIMMABLE) Supply of SMD LED, IP 40, 18W DALI dimmable Recessed downlighter with System efficacy of 120lm/W and system lumen output 2160 lumen, operating in an ambient temperatire of 0⁰C to 45⁰C at 50Hz frequency. Luminaire shall have aluminium pressure die cast housing in white with high transmittivity diffuser for uniform illumination and reduced glare. EMC/PCT package of wattage of 0.5-1 W LEDs used in the product shall comply with IEC 62471 for Photo-biological safety. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. The LED shall comply with L70 life of 50000 burning hours tested at maximum current. The LEDs used should be with CCT of 5700 K and CRI of Minimum 90, with MacAdam CCT binning <3 mounted on 1.6mm MCPCB/FR4 with 35 micron cu layer. LED Driver shall be external, Isolated type, DALI 2.0 driver with proper heat sink for heat dissipation suitable to operate at nominal rated voltage of 240V with 1 kV internal surge protection, Power factor of minimum 0.95, driver efficacy of minimum 85%, and total harmonic distortion (THD) of less than or equal to 10% should be integral to the luminaire and driver should have EMC/EMI compliance. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. Luminaire Dimension : 159 mm dia, 39 mm height ; cut-out dimension : 145 mm |
| 203 | 45W GATE LIGHT Supply, Installation, Testing & Commissioning of LED Post Top with a system lumen output of 4500 lumens and a minimum system efficacy of >100 lm/W. The luminaire shall have a rated system lifetime of >50,000 burning hours at L70. The luminaire should have a color temperature of 4000K/5700K and CRI > 70. The luminaire shall meet IP66 and IK07 with THD < 10% at full load and PF > 0.95. The total power consumption should not exceed 45W (including driver). Surge Protection of 4KV is provided. The driver and fixture should be BIS approved. The fixture should comply with the parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Dimension: Ø366 X 370mm & Weight including all accessories should not be more than 2.2Kg. |
| 204 | Supply, Installation, Testing & Commissioning of Wall fan,400 mm sweep, Sturdy close-mesh guards with powder coating to ensure corrosion resistance as per safety standards, Aerodynamically designed blades for higher air delivery and minimum noise level, capacitor etc. suitable for operation on 230 volt, 50 Hz, A.C. supply complete as required. as complete as required |
| 205 | Supply and erection of 6m octagonal Pole with double arm. Material for pole section: Hot rolled product of non alloy structural steel grade S355, Other parts: MS as per IS 2062. Material as per BS EN 10025 equivalant to Indian standard.. Bottom (O.A.F.) 130mm and top (O.A.F.) 70mm. Size of Base Plate: 220 SQ, thickness of base plate should be minimum 16mm, hole PCD 220, hole dia 24mm. Tolerance on material thickness as per IS:2629. Pole shall be hot dip galvanized with coating thickness of 75 microns average as per IS: 2629. Make: Signify 6mtr. octagonal pole with single arm of 1000mm length and 33.7mm dia. |
| 206 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C |
| 207 | Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc .as required. |
| 208 | Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 209 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2x1.5 sq mm + 1x1.5 sq mm earth wire |
| 210 | 4x1.5 sq mm + 2x1.5 sq mm earth wire |
| 211 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 212 | 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire |
| 213 | 2x6 sq mm + 1x6 sq mm earth wire. |
| 214 | 2x10 sq mm + 1x6 sq mm earth wire. |
| 215 | 4x6 sq mm + 2x6 sq mm earth wire |
| 216 | 4x10 sq mm + 2x6sq mm earth wire. |
| 217 | 4x16 sq mm + 2x6sq mm earth wire. |
| 218 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20mm dia |
| 219 | 25mm dia |
| 220 | 32mm dia |
| 221 | 50mm dia |
| 222 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 3 x 2.5 sq.mm (For Lift Shaft) |
| 223 | 3 x 4.0 sq.mm (For Lift Shaft) |
| 224 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required. 4 Way |
| 225 | 6 Way |
| 226 | 8 Way |
| 227 | 12 way |
| 228 | Supply of following sizes of 1.1KV grade multicore Aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to relevant IS (Cable shall be purchased only after approval of cable schedule by architect / consultant) 3.5 core, 300 sq. mm. Al. Armoured Cable |
| 229 | 3.5 core, 240 sq. mm. Al. Armoured Cable |
| 230 | 3.5 core, 150 sq. mm. Al. Armoured Cable |
| 231 | 3.5 core, 95 sq. mm. Al. Armoured Cable |
| 232 | 3.5 core, 70 sq. mm. Al. Armoured Cable |
| 233 | 3.5 core, 50 sq. mm. Al. Armoured Cable |
| 234 | 3.5 core, 35 sq. mm. Al. Armoured Cable |
| 235 | 4 core, 16 sq. mm. Cu. Armoured Cable |
| 236 | 4 core, 10 sq. mm. Cu. Armoured Cable |
| 237 | 2 core, 10 sq. mm. Cu. Armoured Cable |
| 238 | 2 core, 6 sq. mm. Cu. Armoured Cable |
| 239 | 4 core, 2.5 sq. mm. Cu. Armoured Cable |
| 240 | 4 core, 6 sq. mm. AL. Armoured Cable(for external light) |
| 241 | Supply of following sizes of 1.1KV grade multistranded copper conductor PVC insulated cable including termination complete as required in existing conduit. 1Cx16 sq.mm PVC Insulated cu wire including termination etc. for UPS / Inverter. |
| 242 | 3.5 core, 95 sq. mm. Cu Armoured Fire Survival Cable |
| 243 | 3.5 core, 70 sq. mm. Cu Armoured Fire Survival Cable |
| 244 | 4 core, 16 sq. mm. Cu. Armoured Fire Survival Cable |
| 245 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm |
| 246 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 247 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 248 | Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) |
| 249 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 x 10 sq. mm (19mm) |
| 250 | 2 x 6 sq. mm (19mm) |
| 251 | 3½ X 35 sq. mm (32mm) |
| 252 | 3½ X 50 sq. mm (35mm) |
| 253 | 3½ X 70 sq. mm (38mm) |
| 254 | 3½ X 95 sq. mm (45mm) |
| 255 | 3½ X 150 sq. mm (50mm) |
| 256 | 3½ X 240 sq. mm (62mm) |
| 257 | 3½ X 300 sq. mm (70mm) |
| 258 | 4 X 10 sq. mm (25mm) (The Termination including 4 x 6, 4 x 4 & 4 x 2.5 sq. mm cable) |
| 259 | 4 X 16 sq. mm (28mm) |
| 260 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 261 | 150 mm wide x 50 mm depth x 1.6 mm thickness. |
| 262 | 300 mm wide x 50 mm depth x 1.6 mm thickness. |
| 263 | 450 mm wide x 62.5 mm depth x 2.0 mm thickness. |
| 264 | 600 mm width X 62.5 mm depth X 2.0 mm thickness |
| 265 | 750 mm width X 62.5 mm depth X 2.0 mm thickness |
| 266 | 900 mm width X 62.5 mm depth X 2.0 mm thickness |
| 267 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"bends\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 268 | 150 mm wide x 50 mm depth x 1.6 mm thickness. |
| 269 | 300 mm wide x 50 mm depth x 1.6 mm thickness. |
| 270 | 450 mm wide x 62.5 mm depth x 2.0 mm thickness. |
| 271 | 600 mm width X 62.5 mm depth X 2.0 mm thickness |
| 272 | 750 mm width X 62.5 mm depth X 2.0 mm thickness |
| 273 | 900 mm width X 62.5 mm depth X 2.0 mm thickness |
| 274 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"Tee\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 275 | 150 mm wide x 50 mm depth x 1.6 mm thickness. |
| 276 | 300 mm wide x 50 mm depth x 1.6 mm thickness. |
| 277 | 450 mm wide x 62.5 mm depth x 2.0 mm thickness. |
| 278 | 600 mm width X 62.5 mm depth X 2.0 mm thickness |
| 279 | 750 mm width X 62.5 mm depth X 2.0 mm thickness |
| 280 | 900 mm width X 62.5 mm depth X 2.0 mm thickness |
| 281 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"Reducer\\"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 282 | 150 mm wide x 50 mm depth x 1.6 mm thickness. |
| 283 | 300 mm wide x 50 mm depth x 1.6 mm thickness. |
| 284 | 450 mm wide x 62.5 mm depth x 2.0 mm thickness. |
| 285 | 600 mm wide x 62.5 mm depth x 2.0 mm thickness. |
| 286 | 750 mm wide x 75 mm depth x 2.0 mm thickness. |
| 287 | 900 mm wide x 75 mm depth x 2.0 mm thickness. |
| 288 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 289 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 290 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 291 | 160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 292 | 200 mm dia (OD-200 mm & ID-175 mm nominal) |
| 293 | Preparation of concrete foundation, installation, testing and commissioning and earthing for 5 M Pole. The concrete foundation shall be of size 550 mm long, 550mm wide and 1200mm deep with necessary excavation, providing & laying in position 1:2:4 RCC with laying base concrete: 150 mm thick (1:4:8 i.e. I cement: 4 coarse sand: 8 graded stone aggregate; 40mm nominal size). Providing, straightening, cutting, bending and placing in position reinforcement column of cold twisted bar of 8 mm dia. x 1000mm long (Apprx,) x 10 Nos. and reinforcement ring of cold twisted bar of 8mm dia. x 1600 mm long (Apprx.) x 8 Nos. (with 190 mm spacing), casting RCC 1:2:4 including positioning of foundation bolt (Template) & PVC Tee & PVC Pipe of 65 mm dia. for cable entry at desire level strictly as per drawing: and as per direction of Engineer-in-Charge as required. Sanctioned in Barsana Parikrama Marg. |
| 294 | Supply & fixing of Decorative Mild steel galvanized tubular Pole having of 4 mtr with single arm bracket, cast alumn. embellishment E3. Pole should have a service window and fixed base plate at bottom proile. completee in all respect. Make Lustre, Twinkle, K Lite |
| 295 | Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. Confirming to IP 66 and above protection complete in all respect. Make Lustre, Twinkle, K Lite |
| 296 | Construction of Granular Sub Base by Providing Granular Material, spreading in uniform layers with Motor Grader on prepared surface, mixing by mix in placed method with Froont & Loader at OMC and compacting with Vibratory Roller to achieve the desired density. |
| 297 | Construction of un-reinforced, plain cement concrete avement thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction, expansion, construction and constructionl joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days, curing compund (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. |
| 298 | Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete. |
| 299 | Reinforcement of Reinforced concrete or reinforced brick work brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level etc complete as per MoRT&H Specifications 12.40 (1600) as per Analysis. |
| 300 | Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834for hot sealing bitumen compound grade A.) |
| 301 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc.,complete as required. 63 mm dia |
| 302 | 120 mm dia |
| 303 | Supply, Installation, Testing & Commissioning of outdoor type Package Substation consisting of 630KVA, 11/0.433 KV, Oil type Transformer, with on load tap changer (+5% to -15% in step of 1.25%) & OTI, WTI, One way RMU with one no 1250A Breaker and 1 Set of dual core dual ratio 3 CTs of 50/5-5 ratio 15VA burden and accuracy Class-0.5 for metering and class 5P10 for protection one breaker of 1250A with self powered IDMT relay, HT metering, as per technical specification. |
| 304 | Supply, installation, Testing & Commissioning of 'Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other necessary arrangements Complete as per CPWD specifications, should have QR code which should contain drawing, test report OEM manual,GeoTag of manufacturing location, rating plate as per relevant IS Code etc. andconsisting of the followings: Diesel Engine: Turbocharged Diesel engine 4 stroke water cooled, multi cylinder, dynamically balanced fly wheel, electric start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be with Electronic governor, Dry type Air filter with service indicator, first filling of engine fuel (after commissioning) lubricating Oil, Coolant and other consumables complete with all the required accessories, the Electronic governor shall be as per ISO 8528.The engine shall comply to the latest CPCB norms (CPCB IV + or better) and Conforming to BS 5514, BS 649, IS 10000, IS 10002, IS 13018 and as per CPWD specifications. 125KVA DG Set |
| 305 | Supply, installation, Testing & Commissioning of 'Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other necessary arrangements Complete as per CPWD specifications, should have QR code which should contain drawing, test report OEM manual,GeoTag of manufacturing location, rating plate as per relevant IS Code etc. andconsisting of the followings: Diesel Engine: Turbocharged Diesel engine 4 stroke water cooled, multi cylinder, dynamically balanced fly wheel, electric start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be with Electronic governor, Dry type Air filter with service indicator, first filling of engine fuel (after commissioning) lubricating Oil, Coolant and other consumables complete with all the required accessories, the Electronic governor shall be as per ISO 8528.The engine shall comply to the latest CPCB norms (CPCB IV + or better) and Conforming to BS 5514, BS 649, IS 10000, IS 10002, IS 13018 and as per CPWD specifications. 500 KVA DG Set |
| 306 | MAIN L.T. PANEL Design, Manufacturing, Supply, Installation, Testing & Commissioning of Main LT Panel. The panel will be totally enclosed type with, free standing, compartmentlized, floor mounted, indoor duty - IP 42, front operated, electrical panel fabricated from 2 mm thick Sheet Steel as per EPC tender specifications and will be complete with the main and auxiliary bus bars, metering system, indication lamps, CT's, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 70 micron thickness. The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have electrical / mechanically interlocking with incomer / buscoupler switching and having following incomming and outgoing Air Circuit Breakers, MCCB as per the drawing and specification. All the control system and ACB & MCCB shall be compatible for SCADA system integration for monitoring / control. The entire control wiring shall be done accordingly. Each incoming and outgoing ACB breaker will have microprocessor release (O/C, S/C & EF release with hi set) or as mentioned in BOQ. All the Breaker shall Ics=Icu=Icw=50 KA. All the ACB shall be EDO Type. All ACB in main LT Panels shall have RS845 port for communication and Ethernet Gateway Module for Energy Meter shall be connected over IP network using Din Rail Mounted Managed Ethernet Switch in such a way that all electrical panel data shall be able to be communicated to SCADA. All MCCBs shall be with Microprocessor based release having inbuilt adjustable protections against Over Load (L), Short Circuit (S) and Ground Faults (G) with time delay. All MCCBs should be provided with the Rotary Operating Mechanism. The ROM should be with door interlock (with defeat feature) & padlock facility. Panel shall be rated for Impulse withstand capability 8 KV for main circuit as per IEC 61439 Clause 5.2.4 Rated impulse withstand voltage (Uimp) (of the Assembly). Main switchboard shall be form 4b, for form of separation only metallic covers shall be used. All panels above 630A and above shall be design verified / TTA (IEC61439-1&2). The TTA Panel design of the Switchboard shall be proven design from the main switchgear manufacturer (OEM).The Panel design shall be type tested for Internal arc tests as per IEC 61641 for 70 KA/ 50 KA for 0.5 sec as applicable as per system design fault level at HBB, VBB and cable chamber. Copies of the test certificate of any one rating shall be submitted along with the tender. All other specification shall be as per EPC Tender document.For Incomer and important outgoing feeders comprehensive power meters shall be provided which shall display A, V, Pf , Hz ,Kw , KVA, KVAr, Kwh , Kvarh, average and maximum values , demand values , THD on current and Voltages, Individual harmonics up to 31st level.. Also add on modules for RS485 port, programmable contacts, analogue output etc. to link to SCADA system. For outgoing feeders comprehensive power meters shall be provided which shall have 3 line display A , V, Pf , Hz ,Kw , KVA, KVAr, Kwh, Kvarh, RS485 port etc to link to SCADA system. All ACBs, MCCBs of Main LT Panel and Incomer MCCBs shall have inbuilt Earth Fault Protection. INCOMING FROM 630 KVA PSS, 500 KVA DG & 125 KVA DG - 1 Nos. 1250 Amp FP Electrically operated horizontal drawout type Air Circuit Breaker. 1 Nos. 800 Amp FP Electrically operated horizontal drawout type Air Circuit Breaker. 1 Nos.250 Amp FP Moulded Case Circuit Breaker. INSTRUMENTS:1 Nos. digital Multi Function Meter with CT's(one set for each incoming breaker). 1 Sets of phase indicating lights (RYB) with protection fuses (one set for each incoming breaker). 1 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming breaker). 1 Set of CT's one of 1250/ 5Amp ratio for APFC relay. 1 Set of CT's one of 800/ 5Amp ratio. 1 Set of CT's one of 250/ 5Amp ratio. 1 Set Surge Protective Devices(one for each Incoming Breaker). 1 Nos. Frequency meter (one for each Incoming Breaker). 1 Nos. Under Voltage & Over Voltage Relay(one for each Incoming Breaker). 1 Nos. Phase Reversal Relay (one for each Incoming Breaker). 1 Nos. Master Trip Relay.(one for each Incoming Breaker). 2 Nos.Trip Circuit Supervision. only DG case. PLC for AMF,load management & interlocking and synchronizing throght DG controller/suitable relay. OUTGOING- EACH OUTGOING FEEDER SHALL HAVE PANEL MOUNTED DUEL SOURCE THREE PHASE ENERGY METER , ON, OFF & TRIP INDICATION LAMP & PHASE INDICATION LAMP WITH PROTECTION MCB. 01 Nos. 400 Amp FP Moulded Case Circuit Breaker. 04 Nos. 315 Amp FP Moulded Case Circuit Breaker. 01 Nos. 250 Amp FP Moulded Case Circuit Breaker. 1 Nos. 200 Amp FP Moulded Case Circuit Breaker. 3 Nos. 160 Amp FP Moulded Case Circuit Breaker. 1 Nos. 125 Amp FP Moulded Case Circuit Breaker. 5 Nos. 100 Amp FP Moulded Case Circuit Breaker. 6 Nos. 63 Amp FP Moulded Case Circuit Breaker. 1 Nos. 40 Amp FP Moulded Case Circuit Breaker. Main L.T. Panel describe as above |
| 307 | CAPACITOR BANK PANEL(200 KVAR) INCOMING: 1 Nos.400 Amp FP Moulded Case Circuit Breaker. 1 Nos. 0 to 500 Volt digital voltmeter with Voltmeter Selector Switch & Protective SP MCB (96mm square) (one for each Incoming Breaker). 1 No. 0 to 400 Amp digital ammeter (96mm square) with CT's. 1 Sets of phase indicating lights (RYB) with protection SP MCB's (one set for each incoming breaker). 1 Sets breaker 'ON' & 'OFF' indicating lamp with protection MCB's (one set for each incoming breaker). 8 Step Automatic Power Factor Correction relay (APFC relay). BUSBARS: 500 Amp TPN busbars of aluminium alloy as per SLD. OUTGOING: 2 Nos. 125 Amp TP MCCB. 3 Nos.63 Amp TP MCCB. 3 Nos. 32 Amp TP MCCB. 2 Nos. capacitor duty contactor (one for each 50 KVAR capacitor unit). 3 Nos. capacitor duty contactor (one for each 25 KVAR capacitor unit). 2 Nos. capacitor duty contactor (one for each 10 KVAR capacitor unit). 1 Nos. capacitor duty contactor (one for each 5 KVAR capacitor unit). 2 Nos. 50 KVAR Heavy Duty Capacitor Bank, 480 Volt with 7% de-tuned reactor. 3 Nos. 25 KVAR Heavy Duty Capacitor Bank, 480 Volt with 7% de-tuned reactor. 2 Nos. 10 KVAR Heavy Duty Capacitor Bank, 480 Volt with 7% de-tuned reactor. 1 Nos. 05 KVAR Heavy Duty Capacitor Bank, 480 Volt with 7% de-tuned reactor. 08 sets of push button stations Red and Green for manual operation of capacitor units with auto/manual selector switches. 1 No. Indicating lamp for each 50/25/10/05 KVAR capacitor unit to indicate that the unit is 'ON'. 1 No. Toggle switch for changing automatic to manual operation of capacitor units. 1 No. Power factor meter. Capacitor Panel Describe as above |
| 308 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding with special shaped washers etc. complete. Hot finished welded type tubes. |
| 309 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 310 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 311 | Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc.as required. |
| 312 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 313 | Providing and fixing 25 mm X 5 mm G.I. strip onsurface or in recess for connections etc. as required. |
| 314 | Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. |
| 315 | Providing and fixing earth bus of 50 mm X 5 mm GI strip on surface for connections etc. as required. |
| 316 | Providing and fixing 12 mm thick frameless toughened glass doorshutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately). |
| 317 | Supply and fixing of SS door Handle 30mm*400mm long including lock and corners. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender