Tender For Construction Of Acr At Girls Middle School Chowgund (Estimated Cost 20.48 Lacs ( Base Amount 17.36 Lacs + Gst Amount 3.12 Lacs )
Tender Value
20.48 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
3 days left
EMD
40960
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Acr At Girls Middle School Chowgund (Estimated Cost 20.48 Lacs ( Base Amount 17.36 Lacs + Gst Amount 3.12 Lacs )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: : All kinds of soil : |
| 2 | Providing and laying of stone soling, hand packed, including carriage and head load of same from approved source upto site of work complete(Including Head load of 200 M) . |
| 3 | P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. (Including Head load of 200 M) |
| 4 | Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.(All upto plinth level ) (Including Head load of 200 M) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)(Including Head load of 200 M) |
| 6 | P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.(Including Head load of 200 M) |
| 7 | Centering & shuttering including strutting, propping etc including removal of form work for Foundations,, footings, bases of columns etc. for mass concrete. |
| 8 | Centering & shuttering including strutting, propping etc including removal of form work for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 9 | Centering & shuttering including strutting, propping etc including removal of form work for Suspended floors, roofs, landings, balconies and access platforms. |
| 10 | Centering & shuttering including strutting, propping etc including removal of form work for Edges of slabs and breaks in floors and walls |
| 11 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. |
| 12 | Providing and laying of stone soling/GSB Under floors , including watering, ramming, consoldating and carriage of same from approved source upto site of work complete including head load. |
| 13 | Brick work with F.P.S (non modular) bricks of class designation 75in super structure upto level V in 1:6 mix (1 cement: 6 coarse sand) including carriage of all materials from approved sources upto site of work complete. (Including Head load of 200 M) |
| 14 | Providing wood work in frames of doors windows, clerestory windows and other frames wrought framed and fixed in position with hold fasts lugs or with dash fasteners of required dia and length (hold fasts lugs or dash fasteners shall be paid for separately (Ist Class imported K D wood) including all carriages complete. |
| 15 | Providing and fixing glazed shutters for doors, windows and clerestory windows of using 3-4mm thick float glass panes including ISI marked M.S. pressed butt shutters in hinges bright finished of required size with necessary screws. Ist class Imported kail wood 30mm thickness |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with s of necessary screws,including panelling of decorative pl;y both sides laminated complete as per direction of Engineer-in-charge. ist class imported KD wood 30mm |
| 17 | P/ f of glass panes 3.5mm thick with the cost of all fittings and fixtures all complete |
| 18 | 15 mm thick cement sand palasterin 1:6 including carriage up to site of work (Including Head load of 200 M) |
| 19 | 6 mm thick cement sand palasterin 1:3 including carriage up to site of work (Including Head load of 200 M) |
| 20 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 21 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 22 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. |
| 24 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 25 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 26 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 27 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2.1 Riveted Welded |
| 28 | Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. including ridges vallies |
| 29 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 30 | Providing and fiixing aluminum Hard ware fiitings |
| 31 | Handles 100 mm |
| 32 | Handles 125 mm |
| 33 | Tower bolt 100mm |
| 34 | T bolt150mm |
| 35 | Casemat stay |
| 36 | Ldrop with inbuilt locking system |
| 37 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender