Tender For Supply, Installation, Testing And Commissioning Of Medical Grade (Ss316) Reverse Osmosis (Ro) Double Pass Plant Of 500 Lph Capacity For Dialysis Unit Alongwith Allied Works At Chc Kreeri.
Tender Value
14.95 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
8 days left
EMD
29900
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing And Commissioning Of Medical Grade (Ss316) Reverse Osmosis (Ro) Double Pass Plant Of 500 Lph Capacity For Dialysis Unit Alongwith Allied Works At Chc Kreeri.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing & Commissioning of Medical Grade (SS316) RO Plant of 500 Liters Per Hour Capacity (Fully Automatic double pass) for Dialysis Unit, along with allied works in CHC Kreeri, along with 2-years Warranty. Complete job as per site condition in all respect. The job includes SITC of Micron Cartridge Filter, Raw Water Pump, Sand and Carbon Filter, Water Softener, Micron Cartridge Filter, High Pressure Pump(2 No.), Reverse Osmosis & Housing (5 No.), Ultra Violet System (U.V), intermediate transfer pump, Transfer Pump(2 No.), Storage Tank x2 , Raw water tank(2000L), Plated Filter,. The job includes complete piping from main water line to storage tank to plant, including reject water (concentrate) pipe line.OTHER ITEMSA. PEX Pipe and 5Nos SS Push Pull connection for 5Nos Dialysis units: For Distribution of Treated Water (as per site condition) B. RO Stand/Skid: 1 No MEDICAL GRADE SS 304C. LPS: Low Pressure Stand 1 NosD. HPS: High Pressure Stand 1 NosE. SV: Solenoid valve 1 NosF. Floaty: 2 Nos G. Electrical Panel: 1 NosH. Rota Meter 60: 1200 lph 4 NosI. Pressure Gauge0: 7 kg/cm2 6 NosJ. Pressure Gauge0: 21 kg/cm2 2 NosK. Inter connecting Piping Loop SS316: 1 lot RO Water Treatment Plant is capable of producing at least 500 LPH of high-quality Reverse Osmosis treated water as per current ISO 23500:2024 series (chemical and Bacteria Free) suitable for Hemodialysis. |
| 2 | Supply, Installation, Testing and Commissioning of 5.5 KVA Online UPS With In build Isolation UPS / Inverter system & 7.5 Kva Stabilizer for power back up of RO Plant for uninterrupted Power Supply with minimum Battery Backup of 5-6 hours (16 x 12V x 65 Ah SMF Batteries) for RO Unit on full load to the system along with 2-years Warranty. The job should be complete in all respects including, battery rack, interlinks, cables, glands, lugs, protection devices, bypass arrangement, earthing, and all other necessary accessories for satisfactory operation.(Make should be of reputed company) |
| 3 | SITC of Power supply cable 6.0 Sq mm, single Core copper wire. Made of copper often 99.97% electrolytic grade with insulation like XLPE or PVC. |
| 4 | Supply and installation of 25 mm PVC conduit including cutting the wall and making good the same for recess conduits. |
| 5 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, including latches , handles etc, all complete as per architectural drawings and the directions of Engineer-in-Charge. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) (SOR 22.1.1.) |
| 6 | Providing and fixing aluminum (ACP) work for shutters of doors, windows & ventilators of approved make conforming to IS: 733 and IS: 1285 including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required as per the directions of Engineer-in-Charge,Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) (SOR 22.1.2.1) |
| 7 | Providing and fixing glazing with float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (SOR 22.3.2) |
| 8 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipe (40 mm nominal outer dia pipes) having thermal stability for hot and cold-water supply including all CPVC plain and brass threaded fittings. The job includes joining and of pipes and fittings with one step VPVC solvent cement and testing of joints complete as per direction of engineer In-charge internal work exposed on wall including fixing the pipe with clamps at 1.00-meter spacing 40mm nominal outer dia pipes for outlet of dialysis machine. (SOR 19.3.1.5) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender