Tender For Comprehensive Maintenance To Md Accn And Otm Accn In Pocket 9 In Age B/R Saharanpur Under Ge Roorkee
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Nov 2026
19 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance To Md Accn And Otm Accn In Pocket 9 In Age B/R Saharanpur Under Ge Roorkee
BOQ
| Sl. No. | Item Description |
| 1 | M&L for PCC (1:2:4) type B-1 using 20mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed. |
| 2 | M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling, mass concrete and sub base of floor etc complete all as specified and directed. |
| 3 | M&L PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in floor etc 100 mm thick finished even and fair laid in alternate bays, with spike rolling to surfaces or making impression of expended metal whilst the concrete is green complete all as specified and directed. |
| 4 | M&L PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in Plinth protection, path etc 75 mm thick finished even and smooth without using extra cement complete with Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) complete all as specified and directed. |
| 6 | Demolition of cement concrete (reinforced) in ground floors and pavings exceeding 15cm thickness (above ground level) complete all as specified and directed. |
| 7 | M&L 15mm dia bore steel tubing medium ISI marked grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 8 | M&L 20mm dia bore steel tubing medium grade ISI marked galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 9 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 10 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 11 | S&F in repair Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe and Making Good to Floor/distrubed surfaces complete all as specified and directed. |
| 12 | S&F in repair Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces complete all as specified and directed. |
| 13 | S&F in repairs PVC Flushing Cistern 10 LITRE capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed. |
| 14 | S&F in repairs Rimless One Piece EWC size 680 x 365 x 705 mm including Duroplast soft close seat cover S Trap/ Ptrap complete all as specified and directed. |
| 15 | M&L for precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, glossy type with grey cement and no pigment laid dry over and including a layer of 25 mm thick sand cushioning complete all as specified and directed. |
| 16 | Dismantling of interlocking paver block and brick in floor laid dry on flat or on edge as in floor complete all as specified. |
| 17 | M&L for sub class A old size bricks laid on edge in floor, laid dry include for laying on and including 25mm thick layer of sand and filling the joints complete all as specified and directed. |
| 18 | M&L for sub class A old size bricks laid on edge in floor, laid dry include for laying on and including 25mm thick layer of sand and pointed with cement mortar 1:3 complete all as specified and directed. |
| 19 | M&L for sub class A old size bricks (except brick) laid on edge in floor, laid dry include for laying on and including 25mm thick layer of sand and filling the joints complete all as specified and directed. |
| 20 | M&L for resecuring or easing of door/window shutter exc 1.00 and n.exc 2.00 sq m in size without taking down and making operation in all respects complete all as specified and directed. |
| 21 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but n. exceeding 4 Sqm each complete all as specified and directed. |
| 22 | S&F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed. |
| 23 | S&F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed. |
| 24 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and directed. |
| 25 | S&F factory made Flush shutters, solid core construction 30mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983 complete all as specified and directed. |
| 26 | S&F 35 mm thick IInd class HW, (Factory Made), Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 27 | Dismantling of wrought Iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 28 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe- 290 (Gde E- 165) complete all as specified and directed. |
| 29 | M&L PCC(1:3:6) type C1 as in bed blocks for hold fast including necessary formwork complete all as specified and directed. |
| 30 | S&F for 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 31 | S&F 150 mm size Aluminium anodised handles cast type, complete all as specified and directed. |
| 32 | S&F mild steel sliding door bolts,300 mm long plate type, stove enameled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed. |
| 33 | S&F in repair corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 34 | S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste fittings, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 35 | S&F SS butt hinges of size 100 mm complete all as specified and directed. |
| 36 | S&F SS tower bolt of size 150 mm complete all as specified and directed. |
| 37 | S&F SS handle of 200 mm complete all as specified and directed. |
| 38 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads complete all as specified and directed. |
| 39 | S&F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. |
| 40 | S&F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. |
| 41 | Supply only for galvanised stainless steel wire mess 0.63mm nominal dia of wire and average width of appearature 1.4mm fixed with tinned tack or galvanised wire staples complete all as specified and directed. |
| 42 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed. |
| 43 | S&F in repair Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples, complete all as specified and directed. |
| 44 | M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 45 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 46 | S&F in repair Rolled sections as in main beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to IS 1161-1979 grade St.-240 complete all as specified and directed |
| 47 | S&F powder coated ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 3 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30mm, cross tee of size 28 mm x 24 mm x 0.40 mm with and incl S&F of 4 mm thick designer ceiling (E-board) board/tiles for insulation and acoustic purpose 595 x 595 mm size fixed with steples on snap grid as in ceiling complete all as specified and directed. |
| 48 | S&F powder coated ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 3 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30 mm, cross tee of size 28 mm x 24 mm x 0.40 mm with and incl S&F 10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/GI/MS as per specification and drawing. |
| 49 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 50 | M&L for light colour (Digital colour) Vitrified Ceramic tiles 10 mm hick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade incl 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 51 | M&L for Coloured (Digital colour) Non skid ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm and not exc 0.18 sqm, in floors etc. including 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 52 | M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 53 | M&L for coloured glazed digital ceramic wall tiles 300×600 mm size and 7-8 mm thick fixed on vertical surfaces with polymer based tile adhesive of approved make and jointed with matching colour grout including preparation of surface, complete all as specified and directed. |
| 54 | M&L for approved decorative digital mural ceramic/glazed tiles, 10 mm thick, of approved size (individual tile size exceeding 0.36 sqm but not exceeding 1.50 sqm), design, pattern, colour and finish, forming the complete mural/ artwork as per approved design and instructions of the Engineer-in-Charge, with each complete mural/design comprising four (4) interrelated tiles, with the required image/ artwork accurately reproduced across the tiles to form one continuous and complete approved mural/design, fixed on prepared wall surfaces with approved polymer-modified cementitious tile adhesive to complete the mural in all respects as per approved design, specifications and directions of Engineer-in-Charge. |
| 55 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 56 | Demolititon of brick work any type any size complete all as specified and directed. |
| 57 | M&L brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6, complete all as specified & as directed. |
| 58 | Taking down cement plaster on brick or concrete walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 59 | M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or on stone masonry surfaces and finished even and fair without using extra cement complete all as specified and directed. |
| 60 | M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick/concrete work surfaces finished even and fair complete all as specified and directed. |
| 61 | M&L Three coat of white wash on wall including preparation of new plastered surfaces complete all as specified and directed. |
| 62 | M&L for preparation of newly plastered surfaces of walls and applying 1.00mm thick wall care putty as on wall surfaces and a coat of wall primer and two coats of oil bound distemper (White or tinted) complete all as specified and directed. |
| 63 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over primer complete all as specified and directed. |
| 64 | Dismantling of stone slab any type complete all as specified and directed |
| 65 | M&L for machine cut kota stone slab flooring 18-20 mm thick over 15 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, complete all as specifed and directed. |
| 66 | M&L for Kota stone slab 18-20 mm thick in skirting, etc over 15 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, complete all as specifed and directed. |
| 67 | M&L for Granite (of any type) 20mm thick machine cut,over 20 mm thick cement screed (1:6) base laid, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed. |
| 68 | S&F in repair ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and directed |
| 69 | M&L in repair for white color rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I capacity of the tank 500 ltrs including GI tank nipple of size 20/15 mm dia complete all as specified and directed |
| 70 | S&F in repair Curtain rod Stainless steel fancy type curtain rod 20 mm dia incl Brackets and knobs complete all as specified and directed. |
| 71 | S&F in repair wall mixer with 3 in 1 (Provision for over head shower and hand shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 72 | S&F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 73 | S&F in repairs door closer hydraulically regulated designation no 1 universal type, suitable for door shutters upto 700mm in widht and of weight between 61 to 80 Kg and fixed complete all as specified and directed |
| 74 | S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed. |
| 75 | S&F windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick \\"D\\" Quality galvanized as per IS 277 with zinc of 150 GSM) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52x25mm, Outer frame & mullion sections to have rebate for glazed shutters. Fly mesh with 20 mm GI flate beading for provision of guard bars/grill. Flymesh shutter section should be of 20x40mm. mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. stay, handles 2 nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and SS mesh for fly mesh shutter with 0.36 mm dia of wire and 1.4 mm aperture. Rubber Gaskets are provided all around the glass. The frame should be fixed to the concrete/ masonry wall by means of self expanding screws. Including 12mm square guard bars with 110mm spacing c/c (Horizontal bay) to be welded on FI 20x6mm around except runner portion complete all as specified and directed. |
| 76 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 77 | S&F in repair 18 mm thick with min density 600 Kg/cum HDMR board of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete all as manufacturer's specifications complete all as specified and directed. |
| 78 | S&F Auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/ Kitchen cabinet shutters complete in all respect and fixed in posititon complete all as specified and directed. |
| 79 | S&F Ball Bearing runners 400mm Telescopic (KA 5632) full extension load capacity 45 Kgs complete all as specified and directed. |
| 80 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in positition complete all as specified and directed. |
| 81 | S&F Stainless steel 304 Grade wire basket of pull out type like lain/cup & saucer/bottle/multi purpose/2-3 shelf baskets etc for kitchens of required size complete fixed in position complete all as specified and directed. |
| 82 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with of flap 30mm complete all as specified and directed . |
| 83 | S&F of SS handle of 200 mm complete all as specified and directed. |
| 84 | S&F of magnet catcher suitable for cupboard shutters, shelfs etc complete all as specified and directed. |
| 85 | M&L for 0.9mm thick Decorative laminate sheet type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and direcetd |
| 86 | S&F in repair of aluminium partition wall comprising aluminium hollow sections of size 50mm x 50mm x 2mm thick for outer frame and intermediate vertical/horizontal members of size 38mm x 38mm x 1.5mm thick at maximum 600mm c/c spacing in both directions, securely fixed to floor and adjoining walls on both sides with minimum 40mm x 40mm x 5mm thick GI/MS L-shaped angle cleats/brackets, using minimum M8 x 75mm approved anchor fasteners at maximum 300mm c/c spacing, including necessary nuts, washers and all accessories, drilling complete in line, level and plumb. Partition to be clad on both sides with 1.2mm thick aluminium sheet securely fixed to frame with minimum 4.2mm x 19mm self-tapping/self-drilling screws/rivets at maximum 300mm c/c spacing to form rigid and completely non-transparent partition, including all cleats, brackets, sealant, cutting, jointing, making good disturbed surfaces and all labour, materials, tools, tackles, transportation, wastage and incidental works complete all as specified and directed by Engr-in-Charge |
| 87 | S&F in repair Hollow PVC Wall Panelling 5mm thick consisting of plain colour PVC sheet inclusive of PVC beading and fixing at site as per specifications complete all as specified and directed |
| 88 | Preparing old plastered surfaces brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl washing, rubbing down and stopping of distempered or painted surfaces and M&L for applying one coat of distemper oil emulsion on old plastered surfaces complete all as specified and directed. |
| 89 | Preparing old plastered surfaces brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl washing, rubbing down and stopping of distempered or painted surfaces and M&L for applying two coat of distemper oil emulsion on old plastered surfaces complete all as specified and directed. |
| 90 | Preparing new plastered surfaces and applying concrete primer and/or cement base putty as required incl preparing the surfaces smooth by rubbing and/or sandpapering and two coats of cement base paint on new plastered surfaces complete all as specified and directed. |
| 91 | Preparing old surfaces incl brooming surfaces, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil or greasy spots incl washing rubbing down and stopping of distempered and painted surfaces and M&L for applying one coat of cement base paint on walls etc complete all as specified and as directed. |
| 92 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 93 | Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 94 | Preparation of old decorated plastered surfaces of walls etc. & applying one coat of white wash complete all as specified and directed. |
| 95 | S&F dry type Dholpur stone cladding using 16 to 18 mm thick gang saw cut Dholpur stone slabs of approved shade, size and pattern fixed over concealed MS tubular framework comprising 40x40x2.6 mm MS square tubes as vertical members and 25x25x2.0 mm MS square tubes as horizontal members including necessary MS L-shaped brackets/cleats of minimum 50x50x6 mm size, fixed to brick wall/concrete wall with minimum 2 Nos. M10 mechanical expansion anchor fasteners per bracket, SS 304 clamps of minimum 25x3 mm size with SS 304 M8 bolts/fasteners for fixing stone slabs, minimum 4 Nos. clamps per slab, kerf cutting, edge dressing, V-grooving, drilling, welding and all necessary fabrication, fixing to brick wall/concrete wall, red oxide primer and two coats of synthetic enamel paint to steel work, silicone sealant in joints and all connected sundries complete all as specified and directed. |
| 96 | Providing and fixing LED looking mirror of approved make, comprising 5 mm thick high-quality copper-free silver mirror with polished and bevelled edges (where specified), fixed over a moisture-resistant backing board using approved mirror adhesive and mechanical fasteners complete all as specified and directed.The mirror shall be provided with:1. Inbuilt energy-efficient LED strip lighting (cool white 6000–6500K/warm white 3000K/natural white 4000K, as specified).2.Touch sensor switch for ON/OFF operation.3.Anti-fog (demister) pad (where specified).Input supply: 220–240 V AC, 50 Hz.LED life: Minimum 30,000–50,000 hours.Protection: IP44 or higher suitable for bathroom use. |
| 97 | S&F in position single or double leaf frameless glass door as required, made of 12 mm thick clear toughened glass, fixed directly to the existing masonry/RCC wall/opening with approved make stainless steel patch fittings, top and bottom fittings/hinges, suitable anchor fasteners and necessary brackets, complete with floor spring, Stainless steel pull handle, and door lock with cylinder and key, and all other required hardware, fittings, accessories and fixing materials, including drilling, anchoring, alignment and making good, complete in all respects as directed by the Engineer-in-Charge. |
| 98 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 99 | M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engr-in-charge |
| 100 | M&L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no). hinges type B-21 100mm long (2 no.) suitable handle (1 no) complete all as specified and directed by Engr-in-charge. |
| 101 | S&F Door closer hydrau lically regulated aluminium (Extruded section), designation No 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed, complete all as specified and directed by Engr-in-charge. |
| 102 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engr-in-charge. |
| 103 | S&F Aluminium 4 Levers Mortice lock, vertical type, size 100 mm complete all as specified and directed by Engr-in-charge. |
| 104 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender