Tender For Addition / Alternation / Improvement To Certain Smqs At 3 Brd Under Ge (Af) Mc Chandigarh
Tender Value
43.67 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
3 days left
EMD
87340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition / Alternation / Improvement To Certain Smqs At 3 Brd Under Ge (Af) Mc Chandigarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Oct-2026 | Corrigendum No 01 | BOQ | 04-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of lime concrete / lean concrete / Brick bats etc. from sunken slab portion exc. 15cm thick but above ground floors, complete all as specified and directed by Engineer-in-charge including removal of demolished material from MD land where complete all as specified and directed |
| 2 | M & L for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregates as in flooring laid in slope complete all as specified and directed |
| 3 | M&L lean concrete type E-2 (1:5:10) using 40mm grade crushed stone aggregate as in sunken portion complete all as specified and directed |
| 4 | M&L for 40mm dia medium grade GI pipe as in spouts / short length including holes in embedded sunken portion complete all as specified and directed |
| 5 | M&L for providing water proofing treatment of sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make as approval in Technical Instruction 5/2003 by adding: (a) 15mm thick plaster in 1:4 cement sand mortar with integral water proofing compound @ 2% by weight of cement on floor and wall / beam, finishing the surface even and smooth without using extra cement. The surface shall then be cured and allowed to dry. (Note: Water proofing compound shall be measured and paid separately). (b) First layer of slurry of cement @ 0.5 Kg/Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.25 Kg/Sqm. This layer will be allowed to air cure for 04 hrs. (c) Second layer of slurry of cement @ 0.25 kg/Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.15 kg/Sqm. This layer will be allowed to air cure for 04 hrs followed with water curing for 48 hrs complete all as specified and directed.(d) Ponding test to be carried out for minimum 24 hrs before filling of sunken slab. |
| 6 | Supply only water proofing compound ISI marked complete all as specified and directed |
| 7 | S&F in repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall, laid in trenches or in floors, complete all as specified and directed . |
| 8 | S&F in repair 75 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall, laid in trenches or in floors, complete all as specified and directed . |
| 9 | S&F 100 mm cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) Including taking down existing pipe complete all as specified and as directed. |
| 10 | S&F 75 mm cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) Including taking down existing pipe complete all as specified and as directed. |
| 11 | Branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches 100 mm dia complete all as specified and directed |
| 12 | S&F in repairs 75 mm dia cast iron Floor Trap / Nahani Trap ,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed |
| 13 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed |
| 14 | S&F PVC (SWR) pipes 110mm dia Single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 15 | S&F PVC (SWR) pipes 75mm dia Single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 16 | S&F for 110mm PVC (SWR) bends any radius complete all as specified and directed |
| 17 | S&F for 75 mm PVC (SWR) bends any radius complete all as specified and directed |
| 18 | S&F for 75 mm branch piece, Single (single Y) equal or unequal complete all as specified and directed |
| 19 | M & L for cutting holes into or through brick walls built in cement mortar or cement lime mortar having superficial area not exceed 150 Sqcm each. making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified and directed |
| 20 | Grubbing up tree trunk upto root girth exceeding 5cms & not exceeding 30cms including cutting of trunk portion protruding over wall surface / roof surface/terrace of building height up to 10.0 metre height. The rate also Includes necessary scaffolding and necessary safety measures if required and making good the surface in cement mortar (1:3) and applying one coat of anti growth of vegetation chemical as per manufacturer's instruction and removal of unserviceable material out side MD land and cleaning site complete all as specified and directed |
| 21 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, cills, sunshades shelves etc and cutting chases for concealed water tubing etc, and making good cutting of exceeding 10 cm but not exceeding 20 cm girth in brick walls making good complete all as specified and as directed. |
| 22 | Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc. complete all as specified and directed |
| 23 | Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc complete all as specified and directed |
| 24 | Steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed. |
| 25 | Steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed. |
| 26 | Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and as directed |
| 27 | Removal of bushes, grass including roots, earth, mud and debris over roof top of building material from roof top surface and cleaning the effected surface neatly and disposal of rubbish out of the premises / MD land including cleaning of spouts/ rain water pipe (at two / three storey building) complete all as specified and directed Note : Surface area of roof slab for the affected area shall be measured. |
| 28 | Taking down cement plaster of any description including racking out joints hacking for keys scrubbing down with etc complete and removal of demolished material out of residential area complete all as specified and directed |
| 29 | M & L Rendering 15 mm thick on fair face of brick surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed |
| 30 | M & L Rendering 10mm thick in cement mortar (1:3) on ceiling and the like and finished the surface even and smooth without using extra cement complete all as specified and directed |
| 31 | M & L Rendering 15 mm thick on fair face of brick surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed |
| 32 | S&F GI wire netting 0.90mm dia and 12mm mesh lathing to RCC Beam/Column- brick Wall junction including all laps, cutting and waste and taking down old U/s wire mesh of any description complete all as Specified and as directed by Engr-in-Charge. |
| 33 | M&L for preparing new plastered surface on wall and applying two coats of oil bound distemper over a coat of one coat of priming plastered and other surfaces with alkali-resistant priming paint laid over 1-2 mm thick putty finish complete all as specified and directed |
| 34 | M&L for preparing new plastered surface of ceiling and applying two coats of oil bound distemper over a coat of one coat of priming plastered and other surfaces with alkali-resistant priming paint laid all as directed |
| 35 | M&L complete removal of existing internal finish at wall by wire brushes & washing rubbing down to expose the old plastered surface including preparing the old plastered surface and applying two coat of oil bound distemper laid over 1-2 mm thick putty finish in two layers all as directed |
| 36 | M&L for preparation of old plastered surface of ceiling and applying two coats of oil bound distemper complete all as specified & directed. |
| 37 | M&L for preparing new / old plastered surface of walls / ceiling / chajja and applying two coats of cement based paint over one coat of alkali-resistant primer, complete all as specified & directed. |
| 38 | M&L for preparing old / new plastered surface of wall / ceiling / chajja and applying two coats of Weather Proof Paint / Exterior emulsion paint for blue colour on fascia of chajja over one coat of alkali-resistant primer, complete all as specified & directed. |
| 39 | Demolition of cement concrete in ground floor and pavings not exceeding 15 cm thick, below or above ground level and in any position including removal complete all as specified and directed |
| 40 | M&L for PCC (1:4:8) type D-2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed |
| 41 | M&L for 40 mm thick, PCC (1:2:4) type B-1 using 20 mm graded stone aggregates as in flooring finished / plinth protection even & smooth with using extra cement complete all as specified and as directed |
| 42 | M&L for 28 mm Wide Plastic dividing strips, 1.5mm thick, inserted in position, conform to design complete all as specified and directed |
| 43 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed. |
| 44 | 25 mm sand cushioning for interlocking tiles including well rammed and consolidation, complete all as specified and directed. |
| 45 | M&L for rubberized machine pressed pre polished precast concrete interlocking paver block any shape, size, desired colour and pattern conforming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment, complete all as specified and directed. |
| 46 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified. |
| 47 | M&L for First Quality, Glazed ceramic coloured tiles 300mm x 450mm x 7mm to 8mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed |
| 48 | M&L for joint free rectified, First Quality, Non skid ceramic coloured tiles 400mm x 400mm x 7mm to 8mm thick, in floors etc, set and jointed each in neat cement slurry and pointed in white cement to match tiles including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 49 | Granite (of any type) work, table rubbed and polished, in platforms, stair case, countertops and like, 20mm thick, in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 50 | Granite (of any type) work, table rubbed and polished, in window cills and like, 20mm thick, in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 51 | M&L for granite stone 16-18 mm thick as in door chowkhat cut to shape making rebates 200 mm wide for double rebate chowkhat and 150 mm wide for single rebate chowkhat fixed over rendering 10mm thick in CM (1:4) on walls / lintel surfaces complete along with three hinges for single & six hinges for double door 150 mm hinges (hinges will be paid separately), complete all as specified and directed. |
| 52 | M&L for 18 to 20mm thick of size not less than 53cm x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed. |
| 53 | M&L for 18 to 20mm thick, machine cut Kota stone as in riser or steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and rounding off edges complete with mirror finish polishing, over and including 10mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed. |
| 54 | M & L for Stop valves concealed type cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia chromium plated and fixed in repairs complete all as specified and directed. |
| 55 | M & L for Bib taps, long shank cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia chromium plated and fixed in repairs, complete all as specified and directed. |
| 56 | S&F in repairs 15 mm dia Wall Mixer Non-telephonic shower arrangement CP with connecting legs and wall flanges, complete all as specified and directed. |
| 57 | S & F Angle valve cast copper alloy chromium plated ISI marked screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions suitable for 15 mm bore tubes fixed in repairs complete all as specified and directed. |
| 58 | M & L 15mm bore Pillar taps cast copper alloy, with capstan heads, fancy type chromium plated any colour, fancy type, high pressure screwed for iron pipe complete all as specified fixed in repairs complete all as specified and directed. |
| 59 | S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete as in repairs all as specified and directed. |
| 60 | S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 15mm bore as in repairs complete all as specified and directed. |
| 61 | M & L for PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed |
| 62 | S&F PVC waste pipe 32mm dia, complete with 80 cm long flexible for WHB fixed in repairs complete all as specified and directed |
| 63 | S&F PVC waste pipe 40mm dia, complete with 80 cm long flexible for sink fixed in repairs complete all as specified and directed |
| 64 | S&F Waste coupling of PTMT (half or full threaded) 32 mm bore (minimum weight 45 grams) fixed in repairs complete all as specified and directed |
| 65 | All as per item No above but 40mm dia (minimum weight 60 grams) for Steel Sink complete all as specified and directed |
| 66 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass frameless fixed with chromium plated brass screws and cup washers ISI marked complete all as specified and directed |
| 67 | S&F in repair Tubular towel rail of Brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 68 | S&F in repair for Swivel shower brass chromium plated 125mm size for fixing with 15 mm pipe complete all as specified and directed. |
| 69 | S&F in repair pegs set of 06 Nos Powder coated stainless steel body fixed with chromium plated cadmium screws complete all as specified and as directed. |
| 70 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern ) including connection to drain and flushing pipe antiphonic pipes including 10 litres capacity PVC flushing cistern , ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high or low level cistern with all connections complete all as specified and directed . |
| 71 | S&F in repair Vitreous China wash hand basin, white, flat back size 550mmx400mm including fixing cantilever 02 Nos brackets of angle 30mmx30mm thickness 4mm, 500mm long with PCC 1:2:4 type B0 in wall complete all as specified and as directed. |
| 72 | Kitchen Sink with drainage board made of stainless steel 1mm thick with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified and directed. |
| 73 | Supply and fixing stainless steel plate rack (utensil rack) of size 750mm x 600mm and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and as directed. |
| 74 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed. |
| 75 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and directed. |
| 76 | Cutting holes through brick wall built in cement mortar, for inserting holdfasts, depth of embedded portion of holdfasts exceeding half brick thick but not exceeding one brick thick and making good the dismantled portion with PCC type B-0, (1:2:4) and cement mortar (1:3) to match the disturbed surface with existing finish, complete all as specified & directed |
| 77 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Roof/Chhajja trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) , fixed with using dead fasten of 150mm long , including distance pieces, cleats doors/gates and like of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 78 | M&L Factory made single extruded WPC (wood polymer composite) solid decorative door/ window/ creosetory windows & other frames/ chowkhat of size 45x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resident and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 79 | M&L factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note: Stainless steel butt hinges shall be paid separately. |
| 80 | M&L Factory Made 35mm thick 100% Solid WPC (Wood polymer Composite) laminated Wire mesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders / Rice Husk / Wheat Husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cum manufactured by company an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter. For fixing Mosquito mesh and XTN aluminum mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed screws at required distance, screws and edges covered with feathered pace edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 81 | M&L Factory made box type powdered coated including grill steel window/ventilator composite type with double pressed steel frames 80 mm x 60mm (Peripheral) and 80x75mm (Intermediate members) made out of cold rolled 1.25mm thick sheet having steel window/ventilators shutter with sash bar of MS tubular section of size 50mm x 20mm x 1-1mm thick fixed with box type hinges, handle of 100mm size made out of Z section 01 No, MS stove enameled black toward bolt of size 120mm 02 Nos, 150 mm mild steel hooks and eyes, each shutter flat iron 40mm x 1.25mm and 200mm long hold fasts 04 Nos each window including 0.56mm nominal dia or wire and average width of aperture 1.18mm wire mesh fixed with beading of 10 mm MS flat and including 4.8mm thick glass fixed with oil putty, including necessary filling hollow frame with PCC (1:3:6) complete all as specified & directed by Engr-in-charge. |
| 82 | M&L Factory made single extruded WPC (Wood Polymer Composite) solid laminated flush type as in shutter or exposed member of cupboard shutter of 18mm thick with balancing on one face and wooden grain pattern lamination on exposed surface with and including 18 mm wide 0.8 to 1.0 mm thick PVC lipping on exposed face to match with shade of shutter fixed with suitable solvent comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant, including dismantling of old board / Cup board shutter any description fixed in any position with nails, complete all as specified and directed. Note: The unit rate shall include the cost of MS Grill, Glass panes & SS Jalli and nothing extra shall be paid to the contractor on this account. |
| 83 | S&F SS handles, oval type, 125 mm size fixed complete all as specified and directed |
| 84 | S&F 125 mm size SS hasp and staple safety type complete all as specified & directed |
| 85 | S&F in repairs 300 mm SS sliding door bolts, plate type, with bright, bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate fixed in repair complete all as specified and directed |
| 86 | S&F 200 mm long SS barrel tower bolts and fixed, complete all as specified and directed |
| 87 | S&F 150 mm type-D, SS handles, complete all as specified and directed |
| 88 | S & F Butt hinges 100 mm size, SS hinge, type C-21 complete all as specified and directed |
| 89 | S&F 300 mm mild steel ordinary rat tail rod pattern springs, including roller & roller plate complete all as specified directed |
| 90 | S&F SS Floor door stopper with hard drawn steel spring 150mm size fixed in floor complete all as specified directed |
| 91 | M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed |
| 92 | S & F 25 mm dia SS curtain rod of 1.20mm thick in repair including taking down existing curtain rod / pelmet Including all fittings and fixtures and making good complete all as specified and directed |
| 93 | S&F Aluminum powder coated door seal (Brass) strip with glass wool fixed with steel screws at bottom rail of external door complete all as specified directed |
| 94 | M&L for disconnecting of PVC tank of capacity 500 Litres to 1000 Litres for cleaning all as specified and directed :-(a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour.(b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins.(c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning including rubbing out old letters written over the tank(d) Refixing the tank in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as directed by Engr-in-charge.Note : Water proofing treatment, PCC benching, below the tank if required to be repaired shall be measured and paid separately under relevant items. |
| 95 | S & F Rotational moulded polyethylene Water Storage Tanks of capacity 500 litres, (cylindrical vertical with threaded top), three layered, hoisted and fixed in position including supply and fixing necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, check nuts & washer, Ball valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed etc. complete including dismantling existing water storage tanks (RCC/PVC) of any capacity complete all as specified and directed. |
| 96 | Dismantling bricks tiles/cement tiles or terracing tiles single layer on roofs and including removing the waste materials to a distance of 500 meters complete all as specified and directed |
| 97 | Demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof) and removal off the existing premises, complete all as specified complete all as specified and directed |
| 98 | Roughening the surfaces of old concrete roof surfaces & sides by picking, brushing with wire brush, sweeping clean and washing down with water to remove dust etc., brushing neat cement slurry with 3.0 kg of cement per Sqm over cleaned roof surfaces complete all as specified and directed |
| 99 | M&L Plain cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in padding on roof. Coping, bed plates, benching and the like finished fair & even laid in required slope, including necessary form work laid in required slope, complete all as specified and directed. |
| 100 | M & L for providing, mixing and applying Dr.fixit / Fosroc / Asian / Berger Primer with 10% water dilution with clean portable water, and applying with roller or brush coverage at the rate 7.0 to 8.0 Sqm per litre/coat. Allow the primer to dry for 04 hrs. and applying a coat of Dr.fixit / Fosroc / Asian / Berger roof seal select (diluted with water in the ratio 2:1) self priming coat at the rate 8-10 Sqm/litre/coat in the SSD condition. Apply 1st coat of Dr.fixit / Fosroc / Asian / Berger roof seal select at the rate of 0.45-0.50 Litres / Sqm per coat. Laying a 45 Gsm glass fibre mesh of 2.50mm x 2.50mm sandwiched between the first and second coat. While the first coat is still wet. Allow the first coat to dry for 04 to 06 hrs, Applying 2nd coat of Dr.fixit / Fosroc / Asian / Berger Roof seal select with the same application coverage. Application direction of 2nd coat should be perpendicular to the first coat. Allow 2nd coat to dry for 04 to 06 hrs. Apply 03rd coat of Dr.fixit / Fosroc / Asian / Berger Roof seal select at an application direction that is perpendicular to that of the 2nd coat with the same application coverage rate to achieve total dry film thickness of 900 to 1000 microns at forced coverage at the rate of 1.50 - 1.60 Litres / Sqm in 03 coats. Check to see no void surface is untreated / uncoated. Allow the system to air cure for 07 days minimum. The material having following technical properties : Attains a tensile strength with fibre N/mm 2=6-8 as per ASTM D 2370; Elongation at break = 200% as per ASTM D 2370, crack bridging ability up to 2mm, Shore-A hardness 80 as per ASTM D2240-2015, Tear Resistance with fibre N/mm 34 as per ASTM D 624, complete all as specified and directed. Note : The Contractor shall provide 12 year waterproofing warranty from the applicator viz. M/S Pidilite Industries / FOSROC / Asian / Berger. |
| 101 | Demolition of RCC roofs, floors (other than ground floors), beams staircases, landing, chajja, and similar suspended work at any height complete all as specified and directed |
| 102 | Use and Waste of Formwork to chullah hoods, chajjas, facia, troughs and similar, items including edges, staging and scaffolding up to 10 mtr heights, complete all as specified and directed |
| 103 | M&L for Reinforced cement concrete (Nominal mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in chhajjas, fascia etc shelves and the like, at any height, complete all as specified and directed |
| 104 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed |
| 105 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet (any shape, pattern) 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr in Charge. |
| 106 | Taking down carefully of point wiring (Light , fan, socket or power complete fittings such as switches, Ceiling roses, pendants, regulator, sockets, Bell push) removing from site of work and making good to the disturbed surfaces of walls/floors etc complete all as specified and directed. NOTE :- Taking down of Light fitting, MCB, DB etc to be measured and paid separately. |
| 107 | Taking down carefully by sub main wiring/service connection of any complete all as specified & directed. |
| 108 | Taking down carefully DB box of any sizes & capacity complete all as specified and directed. |
| 109 | M & L for Concealed Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic UPVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall / roof incl cutting & chases and modular flush metal boxes 0.8 mm thick ( Same as Switches Make) suitable for modular fittings including modular outer cover mirror/Glass finish plate with inner mounting frame of make Legrand (Arteor)/ Schneider (Zencelo) /Anchor (panasonic Thea) /Goldmedal(GIFA Z9) as per site requirement for mounting modular switches, sockets, etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour and including making good disturbed surface (i.e. plastering ,one coat of putty and two coats of old bound distemper paint ) all as specified in current SSR Part-I & II all as directed for One light/fan point controlled by one switches. |
| 110 | All as per item No. 109.00 here - in - before , but One 3-pin socket outlet 5 Amp on independent board. |
| 111 | All as per item No. 109.00 here - in - before, but One 3 pin socket outlet 5 Amp on same board. |
| 112 | All as per item No. 109.00 here - in - before, but One light point controlled by 2, two switches . |
| 113 | All as per item No. 109.00 here - in - before, but One bell point controlled by one switch. |
| 114 | All as per item No. 109.00 here - in - before, but with 2.5 Sqmm copper conductor cable and 2.5 sqmm PVC insulated standard copper conductor complete FRLS cable as continuous earth wire all as specified for One 3 pin socket outlet 15 Amp on independent board. |
| 115 | Material and labour for Concealed Sub Main Wiring with two run single core 6 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100 volts grade colour code cables, drawn on surface in and including UPVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 6Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100 volts grade colour code cable for earth continuity and making good disturbed surface complete all as specified and directed.Note:- Two run of 6 Sqmm (phase+ Neutral) + One run of 6 Sqmm for earth wire + One run of PVC conduit shall be measured as one RM. shall be measured as one RM. |
| 116 | Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon) |
| 117 | Supply and Fixing Modular switch 16/20 Amp single pole one way,1 Module with indicator and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the important parameters like rating etc should be laser printed on every switch along with catoulage number all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon ) |
| 118 | Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon) |
| 119 | Supply and Fixing Modular bell push 6 Amps single pole , 1 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon) |
| 120 | Supply and Fixing Modular socket shutter type, 2-in-1, 3 pins 6 Amps ,ISI marked, combined 2 Module and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the important parameters like rating etc should be laser printed on every switch along with catoulage number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon) |
| 121 | Supply and Fixing Modular socket shutter type, 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea)/Goldmedal(Nexon) |
| 122 | Supply and fixing of MCB protected modular socket with Modular MCB 16 Amps built in MCB+ 16 Amps Top + Socket 16 Amps with concealed metal sheet steel enclosure( same as per socket make ) with inner mounting frame and outer modular mirror/Glass finish cover for mounting complete including making good disturbed surface (i.e. plastering ,one coat of putty and two coats of old bound distemper paint ) complete all as specified and directed . all as specified and directed. Make(Model): Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon GIFA Z9) |
| 123 | Supply and Fixing Modular ceiling rose surface bakelite Square in shape 100 mm x 100 mm, three terminals complete all as specified.Make- Goldmedal(Glassio) or equivalent in Anchor/cera |
| 124 | S&F Modular bell ding dong ,230V,2 Module ,Concealed in wall,with concealed metal sheet steel enclosure( same as per bell make ) with inner mounting frame and outer modular mirror finish cover for mounting complete all as specified and directed.Make(Model): Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon GIFA Z9) |
| 125 | Supply & Fixing Modular fan Regulator electronic, 8 step type 100 watt ,ISI marked, 2 Module complete all as specified. Make: Legrand (Arteor)/ Schneider (Zencelo) /Anchor (panasonic Thea) /Goldmedal (Nexon ) |
| 126 | Supply and fixing MCB double pole 40 Amp, 240V, 10KA, 'C' integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air channels etc complete all as specified.Make: Havells/Legrand/Goldmedal |
| 127 | Supply and fixing Arc Fault Detection Device (AFDD) with RCBO 32 Amp ,100 mA combined SPN MCB + AFDD+RCCB , offering protections for overload, short circuit, residual current characteristics type A, over voltage protection above 270V AC +/- 5% & series, parallel arc fault, AFDD must be with dual test button for AFDD and earth leakage functions along with single diagnostic LED with blinking patterns for continuous ON series arc parallel arc & over voltage protections Make Havells or equivalent complete all as specified & directed . |
| 128 | Supply and fixing MCB Single pole 6 to 32 Amp, 240V, 10KA, 'C' integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air channels etc complete all as specified.Make: Havells/Legrand/Goldmedal |
| 129 | Supply and fixing MCB DB Single pole and neutral 12 way, concealed in wall, sheet steel phospehtised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door including making good disturbed surface (i.e. plastering ,one coat of putty and two coats of old bound distemper paint ) complete all as specified and directed .Make: Goldmedal/Legrand/Havells |
| 130 | Supply and fixing ceiling fans complete with aluminium blades, down rods, suitable for Modular electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current copper motor (BLDC) all as specified and directed . Make- Orient/Havells/Goldstar |
| 131 | Supply and fixing wall mounted LED bracket light,9 watt ,aesthetically designed including retrofit B22 LED bulb 09 watt including making connection with flexible copper 3 core cable 0.5 Sqmm from connector/ ceiling rose to fitting complete all as specified and directed. |
| 132 | Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting polycarbonate channel housing & integrated electronic driver, energy efficient, 140V-270 volts, lumen efficacy 100 lumen/watt, total lumens 2000,complete with two core twisted flexible copper conductor cable of suitable size upto 1 mtr all as specified and directed.. |
| 133 | Supply and fixing 02 feet 10 Watt LED Batten lumen efficacy 100 lumen/watt, total lumen 1000, with extruded polycarbonate housing with high quality PC diffuser complete with two core twisted flexible copper conductor cable of suitable size upto 1 mtr all as specified and directed. |
| 134 | Supply and fixing LED Bulk head Luminaire ,10 Watt made of pressure die cast aluminium hosing with protected diffuser ,colour temp 5000-6500K, PF >0.9 complete all as specified and directed. |
| 135 | Supply and Fixing Modular switch 20 Amp single pole one way,2 Module with concealed metal sheet steel enclosure( same as per socket make ) with inner mounting frame and outer modular mirror/Glass finish cover for mounting complete including making good disturbed surface (i.e. plastering ,one coat of putty and two coats of old bound distemper paint ) complete all as specified and directed . all as specified and directed. Make(Model): Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon GIFA Z9) |
| 136 | Supply and fixing LED street light fitting 25 W powder coated, lumen efficacy 120 lumen/watt ,pressure die cast aluminium body and polycarbonate cover with individual LED lenses having colour temperature, 6500 +/- 500, PF >0.90 with GI factory manufactured bracket all accessories such as connection, nut and bolt etc, complete all as specified and directed. |
| 137 | Supply and fixing of water storage heater vertical (geyser) with inner Tank Material: Blue Diamond Glass Lined Tank- 2X Corrosion Resistance; Outer Body Material: ABS, Type: Storage ; Capacity: 25 Litres; AC 220-240 Volts, Wattage: 2000 Watts; with auto temperature cutoff, Pressure: 8 Bars ; BEE Rating: 5 Star, install on wall by anchor fasteners complete with three core twisted flexible copper conductor cable of suitable size upto 2 mtr all as specified and directed. |
| 138 | Supply and fixing PRCD Top Plug 3 Pin ,16 Amps ,30 mA all as specified and directed. |
| 139 | Supply and fixing MCB DB Single pole and neutral 4 way ,concealed in wall ,sheet steel phospehtised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door including making good disturbed surface (i.e. plastering ,one coat of putty and two coats of Apex paint with matching existing surface), complete all as specified and directed. Make : Goldmedal/Legrand/Havells |
| 140 | Supply and fix Exhaust fan 150 mm sweep,250 CMH,22W,1800 RPM, ABS plastic Body along with inbuilt PVC louvers ( same make as Exhaust fan) at inner wall complete suitable to work on AC , single phase, 230 Volts, 1100 RPM, 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm upto 1 mtr including making good disturbed surface i.e. plastering ,one coat of putty and two coats of old bound distemper paint with matching existing surface) complete all as specified and directed. |
| 141 | Making core cutting hole suitable for 150 mm sweep including making good disturbed surface (i.e. plastering ,one coat of putty and two coats of old bound distemper paint with matching existing surface) complete all as specified and directed . |
| 142 | Supply and fix Exhaust fan 250 mm sweep,810 CMH,37 W, non metallic type along with louvers at inner wall and front grill at the outer wall complete suitable to work on AC , single phase, 230 Volts, 1100 RPM, 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm upto 1 mtr including making good disturbed surface (i.e. plastering ,one coat of putty and two coats of old bound distemper paint with matching existing surface), complete all as specified and directed . |
| 143 | Making core cutting hole suitable for 250 mm sweep including making good disturbed surface (i.e. plastering ,one coat of putty and two coats of old bound distemper paint with matching existing surface) complete all as specified and directed . |
| 144 | Material and labour for Concealed Sub Main Wiring with two run single core 2.5 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100 volts grade colour code cables, drawn on surface in and including UPVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 2.5 Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100 volts grade colour code cable for earth continuity including making good(i.e. plastering ,one coat of putty and two coats of old bound distemper paint with matching existing surface), complete all as specified and directed Note:- Two run of 2.5 Sqmm (phase+ Neutral) + One run of 2.5 Sqmm for earth wire + One run of PVC conduit shall be measured as one RM. shall be measured as one RM. |
| 145 | Supply and fixing Motor starter switch 25 Amps ,2 Module with Red and green Button with modular flush metal boxes 0.8 mm thick ( Same as Switches Make) suitable for modular fittings including modular outer cover mirror/Glass finish plate with inner mounting frame of make Legrand (Arteor)/ Schneider (Zencelo) /Anchor (panasonic Thea) /Goldmedal(GIFA Z9) as per site requirement for mounting modular switches, sockets, etc including making good(i.e. plastering in cement mortar 1:6 ,one coat of putty and two coats of Apex paint with matching existing surface), complete all as specified and directed all as specified and directed. |
| 146 | Supply and fix RCC Precast (Factory Manufactured) Earthing pit 450 mm x 450 mm x 450 mm with 50 mm thickness and Mortar design precast RCC Pit cover 50 mm thickness ,PCC 1:3:6 at bottom 50 mm thickness including taking down old pit cover ,earth work complete all as specified. Make-OM Precast/Dagar Tiles/AC Construction/Bajaj /Venus |
| 147 | Material and labour for Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal dust (100 kg) and common salt (150 kg) ,vegetable soil (300 kg), including GI wire 4 mm dia as earth lead fixed by means of nuts, bolts, check nuts and washers etc and other end connected to the test point including 15 mm dia light grade GI protection pipe upto 7.5 mtr and watering pipe 20 mm dia light grade with funnel and wire mess including necessary earth work i.e. Excavation and removing upto 500 mtr distance with dismantling old earthing, complete all as directed and specified.Note : The earth value/result must be less than 5 ohms. |
| 148 | Note : Amount of credit of Rs. 75264.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender