Tender For Special Repairs To Internal Roads In The Aor Of Pooh Grn (Road To Mes Lower Valley) Under Ge 863 Ews
Tender Value
48.43 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
7 days left
EMD
96860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Internal Roads In The Aor Of Pooh Grn (Road To Mes Lower Valley) Under Ge 863 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all specified and as directed. |
| 3 | M&L Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly priming tack coat with paving Bitumen VG-10 over the prepared surface by mechanical sprayer @ 5 kgs/10 Sqm complete all as specified and directed. |
| 4 | M&L for applying bituminous premixed semi dense asphaltic concrete 40 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed.NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Sch 'A'.(ii) Price adjustment shall be done on MINUS side only @ Rs. 65,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'.(iii) No Price adjustment for Bitumen shall be done for variation on plus side.(iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account. |
| 5 | S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed |
| 6 | S&F dual directional 30 degree angle high intensity reflective Cat Eye double moulded of impact resistance ABS plastic stud 90 x 115 x 16 mm plane base having ultra-violet resistant colour (white/red/yellow) having micro cube corner spark glow PC reflectoe white/ red/ yellow for fixing with epoxy or bitumen adhesive all as complete all as specified and directed. |
| 7 | S&F retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc complete all as specified and as directed. |
| 8 | S&F high intensity prismatic dual direction twin reflector delinator having two nos 110 mm dia red coloured HIP intensity reflectors along with three aditional HIP red reflectors 25x75 mm over 300x165 oval shaped steel sheet 18 gauge head supported over steek tube 47 mm dia of 18 gauge steel support of total height 1000 mm having flared/ welded foot for firm grip to base. All steel parts will be powder coated to make all weather resistance complete all as specified and directed. |
| 9 | S&F for metal beam crash barrier solution with W- beam (single side single barrier) of cold roll formed in thickness 3 mm raw materials confirming to IS 5986/2062/1/48 or equivalent of grade FE360/FE410/FE510 hot dipped galvanised to 550 grm/sqm. Over all length 4318 mm as per customized drawings with effective length of 4000 mm and width of 311 mm, screw of 4.6 grade including necessary earth work, returning filling, removal of surplus soil and cement concrete type B1(1:2:4) using 20 mm graded stone aggregate to embed the vertical post etc complete all as specified and directed. |
| 10 | M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foregion matters etc to receive the markign and M&L for thermo plastic (Reflective) line, dashes, arrows, letters etc of following size wide marking, having 2.5 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed:- Note: - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender