Tender For Special Repair To Bldg No. Pg-27 In Md Accn At Mil Stn Dhana Under Age (I) Dhana
Tender Value
38.83 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
17 days left
EMD
77660
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No. Pg-27 In Md Accn At Mil Stn Dhana Under Age (I) Dhana
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of PCC as in roof pedding(Incl APP membrane) (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and directed. |
| 2 | Matrial and Labour for Cement Concrete 1:2:4 Type B-0 (12.50 mm Graded Stone aggregate in padding, finishing surface concrete topping even and fair (without using extra cement) of average thickness 40 mm in slope as required over roof complete all as specified and as directed. |
| 3 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound@ 3% cement and finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP membrane HMHDPE 3 Kg plain (thickness 3 mm) (total weight of the finished membrane not less than 3.0 kg/ sqm ± 5 % per sqm) confirming to IS 16540: 2017 of following operation complete all as specified and directed:-(a) Applying a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16540: 2017 (b) Applying two coat of hot blown grade bituminen 85/25 @ 1.20 Kg/Sqm over primer.(c) Laying of polymeric water proofing membrane of weight not than 3 kg/Sqm (d) Applying a coat of hot blow grade bitumen 85/25 @ 1.20 kg/Sqm over APP membrane. |
| 5 | Demolition of brick work built in cement mortar of any description incl quions arches but excluding aslars facing complete all as specified and directed. |
| 6 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed. |
| 7 | M&L for brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 8 | Taking down plaster on brick or concrete surfaces including raking out joints for key and srubbing down with water etc complete all as specified . |
| 9 | M&L 15mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces including finishing the surfaces even and smooth (without using extra cement) incl mixing with water proofing compound complete all as specified applying two coats of cement base piaint complete all as specifed and directed. |
| 10 | Supply only integral water proofing compound complete all as specified and directed. |
| 11 | M&L15mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete AND M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed. |
| 12 | M&L for 5mm rendering thick in CM (1:3) on concrete sufaces, finished even & smooth (without using extra cement), complete all as specified and directed. |
| 13 | M&L for sunken floor treatment as in following precedence (i) The treatment of existing sunken floor is to be dismantled upto full depth of Sunken RCC Slab and the surfaces both vertical and horizontal shall be cleaned by removing all loose mortar, dirt, dust etc. by chisel, hammer, wire brush/Jute Brush and Air Blower machine than apply two coats of elastomeric compound viz back bond WPC-30 over one coat on neat primer i.e. Super latex be applied on clean surface.(ii) Provide 40mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sub base and provide 40mm dia GI pipe med gde as in (spout) of 600mm long as in sunken portion. (iii) Then rendering 15mm thick in CM 1:3 using liquid water proofing compound @ rate 200 ml per 50 Kg bag of cement on horizontal and vertical surfaces of sunken portion. Note: Water proofing compound shall be measured and paid separately. (iv) The sunken floor tested for leakage/seepage by ponding it with water for minimum 72 hrs.(v) Then fill the remaining sunken portion with PCC 1:5:10 using brick aggregates including fixing sanitary items requiring embedding in cement concrete. To ensure that there shall not be any seepage/dampness in the slab as seen underneath and side. |
| 14 | M & L for mechine cut kota stone slab flooring 20-25 mm thickover cement screed 20mm thick base laid and jointed with white cement slurry with pigment including cutting and polishing complete all as specified and directed. |
| 15 | M & L for mechine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed/backing coat and jointed with white cement slurry with pigment including cutting and polishing complete all as specified and directed. |
| 16 | Demolition of cement concrete in ground floors and pavings n.exc. 15cm thick above or below ground level complete all as specified and directed. |
| 17 | M & L for 25 mm thick PCC 1:2:4, typeB-O, using 12.5mm graded stone aggregate finished fair and even etc complete all as specified and directed. |
| 18 | M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone agg finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m interval and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed. |
| 19 | M/L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded granite stone aggregate) in sub base of flooring/ hard standing finishing the surface even and smooth complete all as specified and directed. |
| 20 | M&L for Non-skid ceramic colour tiles7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 21 | M&L for Non-skid ceramic colour tiles7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in dado/skerting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 10 mm thick backing coat in cement sand mortar 1:4 complete all as specified and as directed. |
| 22 | M&L Non skid ceramic coloured tiles 7mm to 8mm (square/rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in floors thick in floor etc set & jointed in neat cement slurry and pointed in white cement and pigment over 15mm screed bed or beading layer in CM 1:4 complete all as specified and directed. |
| 23 | M&L Glazed ceramic colour tiles of size 300 x 450 x7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed. |
| 24 | Dismantling of stone slabs/tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 25 | M&L for Granite (of any type) tiles 20mm thick machine cut, in , bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing complete all as specifed and directed. |
| 26 | Rounding to edges of stone slabs one edge such as in steps cooking platform and other similer shine complete all as specified and as directed. |
| 27 | Taking down chowket or frame exc 1.50 sqm but n. exc. 4.00 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed. |
| 28 | Taking down chowket or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed. |
| 29 | Taking down shutters of any description exceeding 1 sq.m and not exceeding 2 sqm each complete all as specified and directed. |
| 30 | M&L for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed (125x60mm) complete all as specified and directed. |
| 31 | M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed. |
| 32 | S & F 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete all as specified and directed. |
| 33 | M/L for 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 34 | S & F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 35 | Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 36 | S&F150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 37 | S & F for 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 38 | Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated/powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 gm/Sqm) with total thickness of coating 0.58 microns finished painted with polyster paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyster powder up to 50-60 microns thick outer frame section 72x55 mm, centre mullion section 72x50 mm, shutter section 47x20 mm, fly mesh section 40x20 mm and the fixed glass beading section 12x12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for gaurd bars/grills, the section cut to length miter jointed with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel (304 grade) mesh for fly mesh shutter fitted with EPDM (Ethyl Propylene Diamine Monomer ) gaskets including fixing window with concrete/stone or brick masonary wall by means of self expanding sleeves and driving MS electroplated 80 mm long bolt into the sleeves through frames (Minimum 4 nos for 1600mm high windows, 3 Nos for 1200 mm less window and 2 nos in ventilator ), including 10 mm square bars welded to 6x12 mm flat at a distance 125 mm c/c etc as per direction of engineer in chaege. Note Refer TD No CELZ/C-TD/102 sheet 1/2 and 2/2. |
| 39 | Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed. |
| 40 | S & F for factory solid PVC door frame of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS Square tube as per specified & drawing in opening complete all as specified and directed. |
| 41 | S & F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed. |
| 42 | S&F for MS butt hinges of 100 mm size cold rolled mild steel medium weight, ISI marked complete all as specified and directed. |
| 43 | Supply & fixing tinted / coulered frosted on one side glass ordinary quality & glazing with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in Each panel 4.8 mm thick complete all as per specified and directed. |
| 44 | S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples wooden bead complete all as specified and directed. |
| 45 | Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 46 | Preparation of old wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 47 | Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and as directed. |
| 48 | Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint , complete all as specified and as directed. |
| 49 | Dismantling unserviceable PVC water storage tank of 500 Ltr capacity, complete all as specified and directed. |
| 50 | Supply and fixing 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with all as specified in SSR Part I complete all as specified and directed. |
| 51 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed. |
| 52 | S&F Vitreous china water closet Orissa pattern long pan size 580x440mm with trap front or back inlet and integral foot rest complete fixed in repair including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe and anti siphon pipe complete all as specified and as directed. |
| 53 | S&F for in repair vitreous china wash basin white flat back size 550x400mm including pedestal excluding taps , waste but including brackets as in repair, complete all as specified and directed. |
| 54 | S&F for 600x450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board on commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 55 | S & F in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 45 cm long between flanges, complete all as specified and directed. |
| 56 | S & F in repair PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specfied and directed. |
| 57 | S & F in repair Bib taps cast copper chromium plated fancy type with crutch or butterfly handle screwed for iron pipe or for brass ferrule of 15 mm bore dia complete all as specified and directed. |
| 58 | S & F in repair pillar cock, chromium plated, fancy type for iron pipe or for brass ferrule of 15mm bore dia complete all as specified and directed. |
| 59 | S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 60 | S & F in repair soap dish vitreous china white approximate size 160 x 160 x 90 fixed to plug with chromium plated brass screw complete all as specfied and directed. |
| 61 | S&F for 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe complete all as specified and directed. |
| 62 | S & F repair in 10 ltr low level PVC value less, syphonic action type flushing cistern,white, with ball value, float and handle including brackets complete all as specified and directed. |
| 63 | S & Fixed in repairs Angle stop valve cast copper alloy, with fancy type chromium plated capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed. |
| 64 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 65 | S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs complete all as specified and directed. |
| 66 | M & L for PVC (SWR) multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement complete all as specified and directed. |
| 67 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 110mm bore complete all as specified and directed. |
| 68 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 75 mm bore complete all as specified and directed. |
| 69 | S&F PVC (SWR) bends any radius 110mm bore with access door complete all as specified and directed. |
| 70 | PVC(SWR) junction single (single 'T') equal or unequal 110mm bore with access to door ccomplete all as specified and directed. |
| 71 | S&F PVC (SWR) bends any radius 75 mm bore with access door complete all as specified and directed. |
| 72 | PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore with access to door ccomplete all as specified and directed. |
| 73 | S&F in repair stainless steel sink 1.00mm thick for kitchen with plug , waste pipe , washers incl bedding in cement mortar to platform l or including fixing cantilever cast iron brackets, connecting union to pipe. overall size 495x420mm bowl size 410mmx330mm x160mm complete all as sepcified and directed. |
| 74 | M& L PCC 1:7:12 with 40 mm graded brick aggregate as filling in sunken floor complete all as specified and directed. |
| 75 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, complete all as specified and directed. |
| 76 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, all as specified. |
| 77 | Refixing old steel tubing and connections in new or old position with all fittings retrieved from Serial here-in-before and fixed (walls, ceiling, floors, etc) of 15 mm dia complete all as specified and as directed. |
| 78 | Refixing old steel tubing and connections in new or old position with all fittings retrieved from Serial here-in-before and fixed (walls, ceiling, floors, etc) of 20 mm dia complete all as specified and as directed. |
| 79 | Taking up or down 15 mm steel tubing and connections including clearing for refixing or removal to store complete all as specified and directed. |
| 80 | Taking up or down 20 mm steel tubing and connections including clearing for refixing or removal to store complete all as specified and directed. |
| 81 | TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping to columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 82 | Form work to soffit of suspended slab such as roof slab/cooking platform not exc 20 0 mm thick horizontal or slopinf flate including fair finished to concrete surfaces complete all as specified and directed. |
| 83 | M&L RCC 1:2:4 Type B-1 (using 20 mm graded aggregate) in Roof slab, shelves supported on wall/column and the like etc complete as required. |
| 84 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 85 | M & L 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with 1 mm thick decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in cupboards , kitchen cabinat etc fixed in repairs all complete all as specified and directed. |
| 86 | S & F Continuous (piano) hinges,width of flap when open is 30 mm mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 87 | S & F 75 mm longExtruded brass handles, fabricated type polished complete all as specified and directed. |
| 88 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed for cup Board shutter etc complete all as specified and directed. |
| 89 | S & F hasp and stapple, safety typeof Aluminium, anodised, including bolt to hinge type, fixed with screws of 100 mm complete all as specified and directed. |
| 90 | S & F in repair block boards 25mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed. |
| 91 | S & F for Harrison rails, 20/25mm dia aluminium alloy rod (Poles, finials , ring & bracket complete all as specified and directed. |
| 92 | M& L for complete removal of existing treatment by scrapping, wire brushing from old wallsand applying two coats of oil bound distemper over chalk whitening primer including preparation of surfaces with wall care putty complete all as specified and directed. |
| 93 | M&L for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying two coat of white wash complete all as specified and directed. |
| 94 | M & L for complete removal of existing treatment and appllying two coats of weather proof exterior paint over a coat of primer and waterproof exterior wall putty on wall for smooth finish including preparation of surfaces complete all as specified and directed.Note : Each stages will be got appoved from Engineer-in-Charge before application |
| 95 | S & F Mild steel work in Hand rails,angle frame half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 96 | Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint , complete all as specified and as directed. |
| 97 | S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed. |
| 98 | S&F kitchen plate rack made of stainless steel sheet not less than 0.63mm thick of over all size 1050mm x 750mm x250mm complete all as specified and as directed. |
| 99 | M/L for 75mm thick PCC 1:3:6, nominal mix, type C2, using 40mm graded crushed stone aggregate as in sub base of floor, hard standing, path, pavings etc, surface finished even and smooth without using extra cement, laid in alternate bays, complete all as specified & directed. |
| 100 | Earth work in excavation in all kind of soil by mechanical means(hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottom, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m complete all as specified and as directed. |
| 101 | S & F HDPE Double wall corrugated sewage line of pipe 200 mmdia ,SN-8 ISI Marked in cluding demolition of old pcc pipe complete all as specified |
| 102 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement and pigments glossy finish complete all as specified and directed. |
| 103 | Taking down carefully existing aluminium/copper point wiring of any type/size (Light, fan, bell, socket, power socket etc complete with board outlet boxes fitting and fixtures such as switches, sockets, lamps holders, brackets, ceiling rose etc and removing from site and making good the disturbed surface of wall /floor etc to match existing complete all as specified and directed. |
| 104 | Taking down existing sub main wiring of any type/size complete from wall and making good distrubed surface complete all as specified and directed. |
| 105 | Taking down existing main switch /DBsw/ac box any type/size complete all as specified and directed. |
| 106 | Taking down carefully ceiling fan/exhasut fan (of any size/make) from the existing position complete all as specified and directed. |
| 107 | M&L for point wiring with 1.5 Sqmm PVC FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC concealed conduit pipe of size not less than 20/25 mm dia suitable as per site reqmt, ISI marked MMS type with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, screws, gutti / roul plugs PVC all as per site requirements including concealed modular terminal boxes for mounting of switches/ sockets/regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green.For one light point/fan Point controlled by one way switch. |
| 108 | All as per item No 107.00 above but for one 5 Amp independent socket controlled by one switch complete all as specified and directed. |
| 109 | All as per item No 107.00 above but one 5 Amp socket controlled by one way switch on same board complete all as specified and directed. |
| 110 | All as per item No 107.00 here-in-before but for power point wiring with 2.5 Sqmm FRLS PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm FRLS PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable for earth continuity complete all as specified and directed. |
| 111 | All as per item No 107.00 here-in-before but one call bell point controlled by one bell push button switch complete all as specified and directed. |
| 112 | All as per item No 107.00 here-in-before but one light point controlled by one two way switch complete all as specified and directed by Engr in Charge. |
| 113 | Material and labour for sub main wiring with 2 x 6 Sq mm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC concealed conduit pipe including continuous running earth wire by 6 Sqmm PVC unsheathed single core stranded copper conductor connected to common earth dolly including plastic terminal boxes completed all as specified and directed. |
| 114 | Supply and fixing modular plate with frame of 12 module complete all as specified and directed. |
| 115 | Supply and fixing modular plate with frame of 8 module complete all as specified and directed. |
| 116 | Supply and fixing modular plate with frame of 6 module complete all as specified and directed. |
| 117 | Supply and fixing modular plate with frame of 3 module complete all as specified and directed. |
| 118 | Supply and fixing modular plate with frame of 2 module complete all as specified and directed. |
| 119 | Supply and fixing modular switch 1 way 10 Amps 1 module complete all as specified and directed. |
| 120 | Supply and fixing modular fan regulator 2 module stepped type complete all as specified and directed. |
| 121 | Supply and fixing modular switch 1 way 16 Amps 1 module complete all as specified and directed. |
| 122 | Supply and fixing modular socket 6 Amps 2/3 Pin combined 2 module complete all as specified and directed. |
| 123 | Supply and fixing modular socket 6/16 Amps 2/3 Pin combined 2 module complete all as specified and directed. |
| 124 | Supply and fixing modular switch bell push 6 Amp 1 Module complete all as specified and directed. |
| 125 | Supply and fixing modular switch 2 way 6/10 Amps 1 module complete all as specified and directed. |
| 126 | Supply and fixing in repair ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified and directed. |
| 127 | Supply and fixing in lamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitting complete all as specified and directed. |
| 128 | Supply and fix in repair LED lamp 10 watt CDL 2 star suitable for 240 volt complete all as specified and directed. |
| 129 | Supply and fixing in replacment of call multi Music type single phase 230 volt complete all as specified and directed. |
| 130 | S & Fixing MCB DB double door VTPN 4 way 415 Volt load line complete all as specified and directed. |
| 131 | S & Fixing MCCB 63 Amps TPN, 25 KA breaking capacity complete all as specified and directed. |
| 132 | S&Fixing MCB DB double door SPN 12 way 240 Volt complete all as specified and directed. |
| 133 | S&F MCB SPN 40- 63 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 134 | S&F MCB SP 40-63 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 135 | S&F MCB SP 6 to 32 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 136 | Supply & Fixing LED light fittings 1 x 20 watt, 220 v AC LED pride essential decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental frendly energy efficient connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 137 | All as per item No 136.00 above but 10 watt complete all as specified and directed. |
| 138 | Supply & fix ceilling fan complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE 5 Star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr in Charge. (New fan provision as per Map Scale) Note : Old u/s existing ceiling fan any size any make should be deposited in E/M store yard for BER disposal. |
| 139 | Supply & fix exhaust fan, steel body AC single phase 230 volt of size 300 mm sweep double ball bearing heavy duty with blades and frame and louver complete including making hole if not available at site complete all as specified and directed by Engr in charge. (New Fan Provision as per Map Scale) Note : Old u/s existing Exhaust fan any size any make should be deposited in E/M store yard for BER disposal. |
| 140 | Supply and fix in replacment of electric water heater storage type steel body with glasslead inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV connection pipe complete all as specified and directed by Engr in Charge. Note : Old u/s water heater any size any make should be deposited in E/M store yard for BER disposal. |
| 141 | M & L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 4 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI med grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate no-4 of SSR part No1 all as directed. |
| 142 | Material and labour for fixing of street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr logn and bend to required shape to luminate the area complete all as specified and directed. |
| 143 | S&F building security light LED fitting with pressure die cast housing, epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 25 watt, fixed / connect properly at directed location on building complete all as specified and directed. |
| 144 | Taking down old serviceable electronic meter of any size and any capacity and refixing the same after completion of work at original site of work including necesary connection complete all as specified and directed. |
| 145 | S&F, in repairs, Ellips Neo Hexa Bulkhead designed for modern homes available in non PIR as well as PIR sensor with premium quality LEDs 10 watt 6000K and including providing and connecting with twin core copper conductor twisted cable and testing on completion all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender