Tender For Periodical Services Certain Otm Accn At Cme Under Ge(Cme) Khadki (8763/E8)
Tender Value
25 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
7 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Periodical Services Certain Otm Accn At Cme Under Ge(Cme) Khadki (8763/E8)
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss effloerent salts and treading oil and greasy spots and applying one coat of white (lime) wash complete all as specified and directed by Engineer-in-Charge. |
| 2 | All as per Item No 1 above but applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 3 | All as per item No 1 above but applying one coat of Oil Bound distemper on walls complete all as specified and directed by Engineer-in-Charge. |
| 4 | M & L for complete scraping down and complete removal of existing treatment of old decorative surface of walls with steel wire brushes of smoke spots, moulds, moss efflorecent salts and applying two coats of Oil bound distemper over layer of 1.5 mm Thick wall care putty upon a coat of primer as per manufacturer's instruction all as specified and directed by Engineer-in-Charge. |
| 5 | M & L for preparation of old surface of ceiling and applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge. |
| 6 | M & L for one coat of synthetic enamel paint over wooden surfaces including preparation of old surfaces over 10cm width or girth complete all as specified and directed by Engineer-in-Charge. |
| 7 | M & L for painting one coat synthetic enamel paint on steel surface including preparation of old surface of any description , over 10 cm width or girth not otherwise described complete all as specified and directed by Engineer-in-Charge. |
| 8 | Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key scrubbing down with water complete all as specified and directed by Engineer-in-Charge. |
| 9 | M & L rendering 10 mm thick cement plastering on brick /concrete surfaces in CM (1:6) finishing surfaces even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 10 | M & L preparing newly plastered surfaces of wall and applying complete wall with 2mm POP/Birla putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer as per manufacturer's instruction complete all as specified and directed by Engineer-in-Charge. |
| 11 | M & L rendering 5 mm thick in CM 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 12 | M & L for preparation of newly plastered surfaces ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 13 | M & L for Cleaning/removing of shrubs/saplings growth on bldgs wall, chajja, applying hot bitumen and making good the damaged portion in CM 1:3 /PCC and match the existing surface at a height n.xc 15m from ground level including necessary scafolding, all saftey measures complete all as specified and directed by Engineer-in-Charge. |
| 14 | M & L for jet washing (90 to 150 bars as required) rubbing down and stopping of old paint and scales over surfaces and applying two coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over old and new surfaces complete all as specified and directed by Engineer-in-Charge.Note:-1.Tri party MOU shall be signed between MES, contractor and paint manufacturing company for pre , during an post work completion site inspetion. Copy of MOU attached with tender documents.2. The quantity compress for Bldg of height upto G+4 and over head reservior of any height and capacity incl required necessary scaffolding and safety precaution. |
| 15 | M & L for preparation of old surfaces and applying one coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over complete all as specified and directed by Engineer-in-Charge. |
| 16 | (Applicable for above all items)(a) Contrator has to employ skilled/unskilled tradesman with adequate experience & required documents to be submitted to office , The rate shall be quotted by the contractor including scaffolding to carry out the work for height more than 18.00 mtrs. ( For item No 1 to 15 )(b) Labour should wear contractors uniform with firm logo, failing which recovery should be lavied from contract payment.(c) Contractor has to complete welcome maints in all aspects within time limit intimated by Engineer-in-charge from the date of Officer Quarter allotment letter, failing which recovery will be initiated.(d) Minimum of 02 x teams of each trades shall be available for maint of urgent nature whenever called upon of any trade, failing which recovery will be initiated for not employing adequate labour at site.(e) Site clearance shall be done by contractor after finishing work.(f) All Scarping work will be done with mechanical scaper.(g) Mechanical scaper should be deposit in our store at the time of sample approval.(h) Contractor has to procure and deposit total quantity of material as per manufacturer instruction and sample approved by GE, the quantity of material calculated as per CA is then kept under the safe custody of Engr In charge. (j) 2 mm thick POP/Birla putty shall be done by contractor whereever reqd and as directed by Engr-in-Charge .(k) Engineer-in-charge/JE shall approve each stage of periodical work. If any dissatisfication of work carried out , then the same shall be rectified by the contractor without any additional charges. Stage passing register shall be maintained accordingly. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender