Tender For Repairing & Replacement Of Damaged Tube Light , Compound Light And Allied electrical installation Work At Kharagpur Sub-Divisonal Court C Us In The Dist Of Paschim Medinipur.
Tender Value
2.52 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
8 days left
EMD
5045
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing & Replacement Of Damaged Tube Light , Compound Light And Allied electrical installation Work At Kharagpur Sub-Divisonal Court C Us In The Dist Of Paschim Medinipur.
BOQ
| Sl. No. | Item Description |
| 1 | LED Batten light (System lumen efficacy ≥105 <120 lm/Watt).Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. completein all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder Coated die cast body(Thickness > 1.20 mm) [DSR(E&M)2025/P46/8.9] |
| 2 | 18- 22 Watt |
| 3 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). [DSR(E&M)2025/P51/8.13] |
| 4 | 72 watt |
| 5 | Supply & Delivery of 240V 9 W LED lamp (minimum Luminous Efficacy 100lm/w.) (Make : Panasonic / Crompton/ wipro/ Bajaj/ Havells) |
| 6 | S & F of 2.5mfd fan condenser in place of damaged (Tipcon make) |
| 7 | Supply & Fixing 40W LED Decorative Post Top light fitting in Pressure die cast Aluminum base with Prismatic polycarbonate diffuser, LED lamp colour Temp-4000K Spun Aluminium top cover & IP66 Protection complete with all accessories incl. supply & fixing of 2 nos. 40mm dia ISI-M GI pipe having 1.5 Mtr. lenth in existing pillar incl painting as perG.S & as per direction of E.I.C. [K-LITE 4998 GADAI / PHILIPS : BGP300 LED 50757 PSU PCINS1 / WIPRO : LP07-671-XXX-40-CL]NOTE : All street light / compound light/ Post Top Lantern should contain internal surge protection with external 10KV surge protection (linline SPD). |
| 8 | Supply and delivery of following size 1.1 kV Gr., 415V XLPE insulated armoured Al cable. (Make- Polycab / Havells / Gloster) |
| 9 | 2 core 10 Sq. mm (for Compound Light) |
| 10 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. [DSR(E&M)2025/P7/10.1] |
| 11 | upto 35 Sq.mm |
| 12 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. [DSR(E&M)2025/P68/1.23] |
| 13 | 2 X 10 sq. mm (19mm) |
| 14 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. [DSR(E&M)2025/P68/11.1] |
| 15 | 5/6 amps switch |
| 16 | 3 pin 5/6 A socket outlet |
| 17 | 15/16 A switch |
| 18 | 6 pin 15/16 A socket outlet |
| 19 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required |
| 20 | Supply & Fixing of 415 Volt, 25 Amp 2 pole with NO+NC Contractor on exsisting Timer DB replaced by damaged one (Make - L&T, Model-MNX 9-2P Cat No. - CS90232 03/ABB/Schneider) |
| 21 | S & F 250 V,50 HZ 18\\" (450mm) high flow oscilating type metal body wall Braket Fan operated by pull cord switch with inbuilt regulator (Make-orient,model-Tornado wall-II) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender