Tender For Providing And Installation Of Different Dia Butterfly & Sluice Valves At 3 Mgd Wtp At Collegetilla, Pragati Wtp & Different Oht Within The Jurisdiction Of Dws Sub-Division No.-I, Collegetilla, Agartala During The Year 2026-27/ Sh:- Providi
Tender Value
35.72 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
15 days left
EMD
71445
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installation Of Different Dia Butterfly & Sluice Valves At 3 Mgd Wtp At Collegetilla, Pragati Wtp & Different Oht Within The Jurisdiction Of Dws Sub-Division No.-I, Collegetilla, Agartala During The Year 2026-27/ Sh:- Providing And Fitting Fixing Of Butterfly Valves Of Different Dia, Sluice Valves, Construction & maintenance Of Sluice Valve Chambers, maintenance Of Different Sluice Valve Etc. Within The Jurisdiction Of Dws Sub-Division No.-I, Collegetilla, Agartala During The Year 2026-27.Job No. 31/Ce/Tjb/2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing CIDF Butterfly valve with bolts, nuts, rubber insertions etc. complete as per CPWD specification and direction of the Engineer - in - charge. (The tail pieces, tappers etc if required will be paid separately ) |
| 2 | xi) 450 mm dia |
| 3 | xi) 400 mm dia |
| 4 | ix. 350 mm dia |
| 5 | viii. 300 mm dia |
| 6 | vii. 250 mm dia |
| 7 | vi. 200 mm dia |
| 8 | Providing and fixing DI specials as per CPWD specification and direction of the Engineer - in - charge. |
| 9 | K. D.I. Flanged Spigotted tail piece |
| 10 | vii. 300 mm dia |
| 11 | vi. 250 mm dia |
| 12 | v. 200 mm dia |
| 13 | v. 350 mm dia |
| 14 | v. 450 mm dia |
| 15 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. |
| 16 | v. 100 mm dia |
| 17 | A. PN - 1.6 |
| 18 | vi. 150 mm dia. |
| 19 | A. PN - 1.6 |
| 20 | v 125 mm dia. |
| 21 | A. PN - 1.6 |
| 22 | vii. 200 mm dia. |
| 23 | A. PN - 1.6 |
| 24 | viii. 250 mm dia. |
| 25 | A. PN - 1.6 |
| 26 | viii. 300 mm dia. |
| 27 | A. PN - 1.6 |
| 28 | Providing and fixing DI specials as per CPWD specification and direction of the Engineer - in - charge. |
| 29 | J. D.I. Flanged Spigotted tail piece |
| 30 | ii. 100 mm dia |
| 31 | iii. 125 mm dia |
| 32 | iv. 150 mm dia |
| 33 | v. 200 mm dia |
| 34 | v. 250 mm dia |
| 35 | v. 300 mm dia |
| 36 | Earth work in excavation by mechanical means(hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m. in width or 10 sqm. On plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.All Kind of soil. |
| 37 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.All Kind of soil. |
| 38 | Supplying and filling in plinth, under floor, foundation etc. with sand(fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.All Kind of soil. |
| 39 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level: |
| 40 | 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 40 mm nominal size) |
| 41 | First class brick work in foundation and plinthincluding cost of all materials as required complete:- |
| 42 | i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 43 | 12 mm cement plaster of mix |
| 44 | i) Cement mortar 1:5 (1 cement : 5 fine sand) |
| 45 | Neat cement punning. |
| 46 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 47 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 48 | Providing and laying in position specified grade ofreinforced cement concrete excluding the cost ofcentring, shuttering, finishing and reinforcement--All work upto plinth level: |
| 49 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 50 | Providing and fitting fixing of DI mechanical joint (J.P. coupling) in/c. rubber washer and nut bolts as per direction of the Engineer - in - charge. |
| 51 | i) 150mm dia. |
| 52 | ii) 200mm dia. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender