Tender For Comprehensive Maintenance To B/R Services In Omq/Single Officers Living Accn At Akash Vihar In Domestic Area At Af Station Suratgarh
Tender Value
40 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
2 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To B/R Services In Omq/Single Officers Living Accn At Akash Vihar In Domestic Area At Af Station Suratgarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Oct-2026 | Corrigendum_01 | BOQ | 05-Nov-2026 |
| 2 | 05-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | BOQ (COMPREHENSIVE MAINTENANCE TO B/R SERVICES IN OMQ/SINGLE OFFICERS LIVING ACCN AT AKASH VIHAR IN DOMESTIC AREA AT AF STATION SURATGARH) |
| 2 | Demolition of brick masonry built in cement mortar including all quoins, arches and removing from site etc. complete all as specified and directed. |
| 3 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cm 1 : 6 complete all as specified and as directed by Engr-in-Charge. |
| 4 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish from the premises. complete all as specified and as directed. |
| 5 | Demolition of cement concrete (un-reinforced ) of any description in ground floors and paving not exceeding 15 cm thick (below or above the ground level) and removing rubbish from the premises. complete all as specified and directed. |
| 6 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd. |
| 7 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd. |
| 8 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing from site complete all as specified |
| 9 | M&L factory made Pressed steel frames of size 105mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 10 | M&L factory made Pressed steel frames of size 125mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 11 | M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing / back filing of pressed steel door frame including necessary form work all as specified. |
| 12 | S&F factory made 35 mm thick 2nd class Hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated completely all specified and directed. |
| 13 | S&F factory made 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkatsNote: Glass/wire gauge shall be measured and paid for seperately. |
| 14 | S&F Aluminum handles, 150 mm size cast type complete all as specified and directed. |
| 15 | S&F as in replacement Aluminum handles, 150 mm size cast type complete all as specified and directed. |
| 16 | S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified. |
| 17 | S&F aluminium alloy, 16mm dia and 300 mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified. |
| 18 | All as per srl item No 16 but fixed as in replacement. |
| 19 | S&F as in replacement Aluminium anodised barrel tower bolt 150 mm long complete all as specified and directed. |
| 20 | S&F as in replacement mild steel barrel tower bolt 200 mm long complete all as specified and directed. |
| 21 | All as per srl item No 16 here in before but mild steeel sliding door bolt 300 mm long stove, enamelled black with bright bolt not less than 12 mm dia. Complete all as specified and directed. |
| 22 | S&F as in replacement galvanised Steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. |
| 23 | S&F as in replacement Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. |
| 24 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified. |
| 25 | Supply and fix in replacement factory made mild steel cupboards shutters 1 mm thick with frame made from 1.25 mm thick sheet including all fittings i.e. mortice lock with handle ,butt hinges ,peg set of three etc including two coat of synthetic paint over primer complete all as specified and directed. |
| 26 | S&F fancy type stainless steel 20 mm dia curtain rod thickness of pipe not less than 1.0 mm including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified and directed. |
| 27 | M& L in replacement for 18mm thick solid HDHMR board with sunmica leminated sheet of thickness not less than 1.0 mm on both side of two different colours (colour finish) as in kitchen cabinet shutter, jointed to form cabinet by means of Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including beddding, providing & fixing of Stainless steel piano hinges suitable for 18/19 mm HDHMR Board (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), complete all as specified and as directed. Note: (a) Quoted unit Rates are inclusive of PVC board, hinges, screws and adhesive etc.(b) For the purpose of payment area of board alongwith decorative laminated sheet shall be measured. |
| 28 | S&F of 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type back side and one face is covered with decorative face veneer with lipping/frame to match, fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as per direction of Engineer-In-Charge. |
| 30 | Factory made single extruded WPC (Wood Polymer omposite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 31 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt inges and necessary S S screws shall be paid separately) |
| 32 | S& F in replacement factory made box type glazed and gauged steel window/ventilator made out of ERW hollow P&T section 50x25mm. Both window to be welded together with flat iron 25x3mm to outer frames on both sides complete all as specified including MS grill and necessary formwork complete and including shop coat redoxide primer with following fittings welded to frame/shutter:-(a) Hold fast 150mm long 25mmx6mm iron made to shape-02 Nos in each window (both sides)(b) Handle of 'Z' section 20mmx25mm Each leaf(c) 100mm stopper-01 No per leaf.(d) MS tower bolt 150mm long - 02 Nos in each leaf.(e) Cleat 55mm long of hollow square 15mm x 15mm x 24mm welded to hinges gauze wall thickness welded to hinges of 50mm size-01 No per leaf.(f) MS box type hinges of size 75x12mm-03 Nos per leaf(g) Fabrication & fixing complete(h) Flat iron for fixing work complete.Note:- (i) Glass panes, wire gauze and painting shall be measured & paid Separately under respective |
| 33 | S&F 100mm butt hinges, stainless steel medium weight fixed with stainless steel screws. |
| 34 | S&F as in replacement floor door stopper of aluminium alloy body tounge, anodised with hard drawn steel spring with overall length of cover plate 140mm long complete all as specified. |
| 35 | S&F as in replacement 300 mm ,mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified & as directed. |
| 36 | M&L sheet glass 5.5mm thick, ordinary quality and glazing with, rubber packing exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge |
| 37 | Supply & fixing Aluminium powder coated glazed three track sliding window of frame 92 x 38x 1.5 mm thick and sliding shutter of section 40 x 18 mm x 1.5 mm including 4 mm thick sheet glass ordinary quality in two track shutters and in one track stainless steel wire cloth, .56 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel staples including all fitting such as aluminium handle of size 100 mm and locking arrangements with each moving leaf aluminium jali, MS Grill with 30 mm x 5 mm flat iron Square bar @ 10 cm c/c complete all as specified and directed by the engineer in charge. |
| 38 | M&L Granite of thickness not less than 18 mm of any type work(table rubbed and polished) in steps, jambs,pillars windows cill cooking platform and like including pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external,including demolition of stone slab and tiles of any description or thickness complete all as specified and as directed. complete all as specified and directed. |
| 39 | M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base,flooring, pavings etc complete all as specified and as directed. |
| 40 | M&L for Plain cement concrete 1:2:4 type B-I (20mm graded stone aggregate) 40 mm thick as flooring finished even and smooth, complete all as specified and directed by Engineer-in-Charge |
| 41 | M&L for vitrified coloured chequred tiles of size 300 mm X 300 mm x 9-10 mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured or white cement to match the shade of tiles, laid over 15 mm thick screed bed in CM 1:6 including coping at sides pcc 1:2:4 & including dismantling of existing tiles.complete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L for providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade conforming to IS: 15658:2006 with approved colour design & pattern as in footparth, hape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper blocks into the sand bedding layer hrough vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all a specified and directed |
| 43 | M&L 75mm cement concrete (1:2:4) Type B2 , 40 mm stone graded agg as in top surface of hard standing , finished even and smooth w/o using extra cement. complete all as specified and directed. |
| 44 | M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 , using 40 mm graded crushed stone aggregate as in floor, laid in slope of 1:12 and surface finished even and smooth without using extra cement including making joint at 2.5 m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand). Complete all as specified and directed. |
| 45 | Demolition fo stone slabs/ tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar and removing rubbish from the premises. Complete all as specified and directed. . |
| 46 | M&L for First quality glazed ceramic coloured tiles of (450x350mm) x 7 mm thick, laid on vertical surfaces of wall such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles with complete all as specified and directed by the Engineer in Charge. |
| 47 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ),and removing rubbish off the premises , complete all as specified and directed by Engineer-in-Charge |
| 48 | M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,with complete all as specified and directed by the Engineer in charge. |
| 49 | M&L for First quality, vitrified coloured tiles, 8 to 9 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sq.m but not exceeding 0.38 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,with complete all as specified and directed by the Engineer in charge. |
| 50 | All as per Srl Item No 48 here in before but tiles as on vertical surfaces. |
| 51 | M&L for machine cut polished kota stone slab flooring of size of Kotastone not less than 550 mm x 550 mm and 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 52 | M&L for polished kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed.Note : Kota stone shall be laid in one piesce for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 53 | M & L for anti skid Vitrified ceramic tiles dark shade 10mm thick (squqre/rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1 sqm in floors, set and jointed in neat cement slurry fixed with 3mm spacer and pointing awith epoxy joint filler and pointed in white or coloured cement to match over and 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 any description complete all as specified and directed |
| 54 | All as per srl item No 52 here in before but tiles fixed on vertical surfaces. |
| 55 | M&L for rubbesized chequered cement concrete tile 30 cm x30cm x 25 mm thick set jointed and pointed in cement slurry and using pigments laid over and including screed bed 15 mm thick in CM 1:6 as in floors. Complete all as specified and directed. |
| 56 | M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 57 | M&L for prepration of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 58 | S&F in replacement vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap 100 mm bore and necessary lime concrete including making good to floor. Complete all as specified and directed. |
| 59 | S&F in replacement viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality complete all as specified and directed. |
| 60 | S&F in replacement, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed. |
| 61 | Supply and fixing in replacement, wash hand basin vitreous china flat back 550 x 400 mm size white, first quality, with and including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets to walls complete all as specified and as directed. |
| 62 | S&F in replacement stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mm x330mmx200mm, with and including PVC waste pipe and CP waste coupling 32mm and making good to disturbed surfaces, complete all as specified and directed. |
| 63 | S&F as in replacement 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated weight not less than 665 gm , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe |
| 64 | S&F in replacement stop/angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy having weight not less than 575 gm, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed. |
| 65 | S&F in replacement PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified. |
| 66 | S&F in replacement Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified. |
| 67 | All as per srl item No 61 here in before but kitchen sink without drainage board and overall size 495 x 420 mm and bowl size 410 x 330 x 160mm. |
| 68 | S&F in replacement, 15mm bore, WHB/Sink mixer, fancy type, chromium plated weight not less than 1 Kg , cast copper alloy, with capstan heads, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified. |
| 69 | S&F in replacement looking mirror premium quality 5.5 mm bevelled edges of selected quality glass, CP brass screws all as specified and directed. |
| 70 | S&F as in replacement PTMT ball valve 20 mm nominal size weight of ball valve not less than 210 gm high pressure with float and flynut. complete all as specified and as directed. |
| 71 | S&F in replacement glass corner shelf 12\\" with brass brackets of heavy duty and thickness of glass min 6mm and railing all as directed |
| 72 | S&F as in replacement Health faucet mild steel chromimum plated suitale for 15mm dia pipe with 1.25m long long flexible tube ABS wall hook including making connections and fixed and complete all as specified. |
| 73 | S&F as in replacement Rotational moulded plythelene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed. |
| 74 | All s per srl item No 72 here in before but tank of capacity 500 Litre. |
| 75 | M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site. complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed |
| 76 | M&L for Galvanised iron tubing 20mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site, complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed |
| 77 | S&F in replacement PVC connection of PTMT450 mm long, non corrosive with nuts and washers on both ends, complete all as specified and directed by the Engineer in -Charge . |
| 78 | Cleaning and removing all scales and dirt etc from tanks of cap 500 ltr and from mouths of circulating pipe etc for any capacity ltrs capacity of tanks and removing rubbish from the premises as directed by eningeer -in-charge. (Note: Date of cleaning to be written on the tank after cleaning) |
| 79 | All as per srl item No 77 here in before but cap 1000 Ltr |
| 80 | S&F in replacement Long Body Bib taps,15 mm cast copper alloy,chromium plated ,fancy type weight not less than 575 gm ,screwed down , screwed for iron pipe , complete all as specified and directed by the Engineer in Charge. |
| 81 | Supply and fixing stainless steel plate rack made out of 1mm thick stainless steel sheet size of rack 600 mmx750 mmx250 mm, complete all as specified and directed. |
| 82 | S&F in replacement bathroom PVC cabinet with best quality mirror, shelves inside, size 450mm x 600mm including required fittings all as directed. |
| 83 | S&F heavy duty stainless Steel Telescopic Drawer Channel/Runner of size 18-20 Inch with 3 Ball Bearing Weight Capacity Upto 45 kg complete all as specified and directed |
| 84 | S&F stainless Steel fancy type round D Drawer Cabinet Handles, 75 mm complete all as directed by Engr-in-Charge |
| 85 | Supply & fixing of auto soft closing hinges openable or duck hinges for kitchen cabinet shutters. complete all as directed by Engr-in-Charge |
| 86 | Grating doom CP 125 mm dia with or without waste pipe hole (minimum weight 40 gms) fixed in replacement complete all as specified and directed. |
| 87 | Dismantling for Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified. |
| 88 | S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructionscomplete all as specified and directed. |
| 89 | M & L rolled mild steel as in framing for cladding and the like fixed with angle cleats and connecting plates Fe410-W (Gde-E-250) quality-A all as specified and directed by Engr-in- charge |
| 90 | Dismantling structural steel or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 91 | Supply and Fixing as in replacement chain link fencing galvanised steel wire mesh including line wires fixed to any type standard, rails, straning bolts including bing with wire . Complete all as specified and directed. |
| 92 | Waterproofing membrane:Supplying and applying water-based ,single component UV resistant elastomeric PU liquid membrane coating conforming to IS 15809 confapplied with brush/roller having SRI >109 with an elongation of >400% and tensile strength of 1.4 MPa as per ASTM D 412, 80 % Solid Content, shore A Hardness of min. 50 as per ASTM D 2240. The system includes final base preparation as per note given below, applying Home Sheild PU ELASTOSEAL BTD or approved product in three coats at 1.85 kg per Sqm providing min 1.5 mm DFT , complete as per Manufacturer specifications along with 45 GSM Fiber mesh sandwiched between 1st and 2nd coat . Waterproofing membrane to be terminated on parapet wall in a V groove of size 25 mm x 25 mm atleast 300 mm above FFL which should be sealed with Polymer Mortar. Additional layer of geotextile membrane for the protection of waterproffing membrane .The application will be executed by company authorised applicator upon verification from the company.Before tratment, repair of roof should be done by contractor as required (CM pointing 1:4 and PCC 1:2:4) |
| 93 | M&L for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sq mtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor. |
| 94 | M&L for Raking out cement/cement mortar in joints/ pointing to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc. with and including Flush pointing to bricks laid flat or brick tiles in CM 1:3 mixed with liquid water proofing compound. Complete all as specified and directed |
| 95 | Hacking out old broken glass of any thickness , size and description n exc 0.50 sqm in each pan metal frame glazing with oil putty or fixed with beadings etc.complete all as specified and directed . |
| 96 | M & L as in replacement 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified |
| 97 | S&F in replacement stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1145mmx510mm with bowl size 560 x410x250mm, with and including PVC waste pipe and CP waste coupling 32mm and making good to disturbed surfaces, complete all as specified and directed. |
| 98 | S&F in replacement, 15mm bore, wall mixer, fancy type, chromium plated weight not less than 1 Kg , cast copper alloy, with capstan heads, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified. |
| 99 | S& Fixing in replacement 20mm bore gun metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe including opening the GI pipe and resecuring the GI pipe in the the same location. (no separate measurements for refixing of pipe will be given) |
| 100 | Petty repairs to leakage in bib tap, pillar tap, stop cock, Angle valve and low level flushing cistern etc of any description including changing the washer etc all as specified. |
| 101 | S& Fixing in replacement small fittings galvanised iron medium grade such as sockets, elbow , nipple (up to size 200 mm), tee , union etc for 15mm bore pipe including opening the connected pipe and refixing in the same location (ISI Mark all as directed) |
| 102 | All as per Srl Item No . 100 above but for 20mm bore pipe |
| 103 | S& Fixing in replacement PVC water storage tank lid cover (Cylindrical) for 500 /1000 ltrs capacity tanks (Make : as per sample) |
| 104 | S&F of cantilever bracket for sink or wash hand basin complete all as specifeied & directed |
| 105 | S& F as in replacement of wooden beads 2nd class hard wood of any size in cup board & glazed or gauged joinery mitres etc all as directed by Engr-in-Charge (As per Sample). |
| 106 | S& fixing as in replacement internal assembly syphonic/non syphonic type for PVC flushing cistern of cap 9/10 Ltr. complete all as specifeied & directed |
| 107 | S&F in replacement spindles for CP brass Wall /WHB/Sink mixer etc full turn fitting /half turns complete as directed . |
| 108 | Removal of air lock/blockage of water in GI tubing 15 mm/20 mm bore, cleaning the pipe or fittings etc and refixing the same in position all as specified. |
| 109 | Petty repairs to leakage in by refixing/resecuring in PVC (SWR) pipes/ CI pipes etc all as specified. |
| 110 | Easing of door/windows (Complete for one no of door or window) shutters of any size/any number of pannels for easy closing/opening / tightning of hinges or changing the position of hinges adjustments of lower bolts, Sliding bolts etc complete all as directed. |
| 111 | Welding of purpose made trade pattern box type hinges to steel windows to obtain smooth opening & closing complete including cutting existing hinge all as specified & directed. |
| 112 | S& Fixing in replacement waste fittings of brass chromium plated 32mm /50mm dia for sink/WHB complete all as specified and directed |
| 113 | S & Fixing in replacement mild steel CP peg set of five/Six complete all as directed. |
| 114 | S&F in replacement PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore. complete all as specified and directed |
| 115 | S&F in replacement PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75mm bore. complete all as specified and directed |
| 116 | S& F as in replacement PVC (SWR) bend with access door of any radius of 110mm bore. complete all as specified and directed |
| 117 | S& F in replacement PVC (SWR) bend with access door of any radius of 75mm bore. complete all as specified and directed |
| 118 | Repairs and resecuring to cup boards including easing of CB shutters, tightning of hinges or handles/knobs hasp and staple etc complete all as directed. |
| 119 | Welding of butt hinges 100 mm medium weight to chowkhat after taking down shutters and refixing in position the same and making functional complete all as specified. |
| 120 | S&F in repairs Flush pipe of polyethylene of low or high density of 32 mm dia, for low level cistern complete all as directed |
| 121 | S&F in replaceement plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified |
| 122 | S&F in replacement CP pressure JET for EWC including flexible pipe for 15 mmdia complete all as directed. |
| 123 | S& F in replacement 32mm dia PVC waste pipe flexible type for WHB or sink 60cm long with union all as specified |
| 124 | S&F in replacement coloured viterous china wash down water closet with cascade type fitting with syphonic action dual type flushing cistern in single piece pattern with inlet, ball valve, float and double push button, incl fixing bolt, plastic water closet seat cover closed pattern with bottom and cover and mild steel chromium plated hinging device with one toilet paper holder, one health faucet and one CP jet spray with 2 x1 m CP flexible tube complete all as specified and directed. |
| 125 | S&F 3 mm thick figured glass, pin headed type and glazing with oil putty in square n exc 0.50 Sqn in each pane. |
| 126 | M&L providing and injecting chemical emulsion for Post Constructional Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand) to match the existing floors all as specified by Engineer-in-Charge. |
| 127 | M&L providing and injecting chemical emulsion for Post Constructional Anti termite Treatment the external wall below concrete or masonry apron using chemical emusion @ 2.25 litre per linear metre includng drilling and plugging holes etc in apron complete all as specified and directed. |
| 128 | M&L in replacement stainless steel tray as per trade patern of sizes as directed for drawer to keep the kitchen utensil as directed. |
| 129 | S&F in replacement 3 track glass corner shelf with brass brackets of heavy duty and thickness of glass min 6 mm with SS railing lfixed to wall, complete all as specified and directed. |
| 130 | S&F in replacement wall mixer 15mm with L bend fency tyupe cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic complete all as specified. |
| 131 | S& F in replacement Chromium plated Overhead Rain shower 125mm IN square with relvoling joint and shower arm of length 400 mm with wall flange 15 mm bore fancy type any colour and fixed in repair. |
| 132 | S&F 30-40 mm wide 2-3 mm thick rubber beading fixed to wooden door with nalls as in replacement all as specified. Please Enable Macros to View BoQ information |
| 133 | S&F 30-40 mm wide 2-3 mm thick rubber beading fixed to wooden door with nalls as in replacement all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 12, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender