Tender For Repair/Replacement Of Wooden Doors, Wiremesh, Pvc Doors, Common & Terrace Area Shutters And Other Joinery Work At Cell No 2 Under Age B/R-I Of Ge (Nw) Nofra.
Tender Value
49.90 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
18 days left
EMD
99800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Wooden Doors, Wiremesh, Pvc Doors, Common & Terrace Area Shutters And Other Joinery Work At Cell No 2 Under Age B/R-I Of Ge (Nw) Nofra.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully door/windows chowkhats or frames without taking off shutters from frame and refixing the same after inspecting the parts/members of doors, including minor repairs as required and removing unserviceable members and replace with new one as required, Complete all as specified directed.(Note: - Replacement of aluminium section, glass and rubber packing shall be measured and paid separately.) |
| 2 | Taking down carefully aluminium shutters of any description exceeding 1.00sqm and not exceeding 2.00sqm and refixing the same after inspecting the parts/members of doors, including minor repairs as required and removing unserviceable members and replace with new one as required, Complete all directed.(Note: - Replacement of aluminium section, glass and rubber packing shall be measured and paid separately.) |
| 3 | Supply only aluminum anodised section of any size, shape and thickness for door, window, partition. Complete all as specified and directed. |
| 4 | Taking down chowkhats or frame not exc 1.5 Sqm with shutters (without taking off shutters from the frames) |
| 5 | Taking down chowkhats or frame exc 1.5 Sqm but not exc 4 Sqm with shutters (without taking off shutters from the frames) of any description etc complete all as directed. |
| 6 | S&F of factory made pressed steel frames for doors/windows with two rebates, size of frame 125mmx60mm, made out of 1.25mm thick MS sheet, including necessary fixing lugs, hinges, lock strick plate, etc, and making good the disterved portion of the wall complete all as specified and directed. |
| 7 | Material and labour for Plain Cement Concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregate filled inside the pressed steel frame and for fixing of hold fast, complete all as specified and directed. |
| 8 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixed in opening as per specification & drawing etc complete and making good the surface/wall portion all as specified and directed. |
| 9 | S & F of Factory Made Solid PVC Moulded Door Shutter with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face as per specification & drawing complete all as specified and as directed by Engr-in-Charge. |
| 10 | S & F of 2nd class HW rail and style Plain framed,35mm thick panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style frame as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated. |
| 11 | M&L for 35mm thick wire gauzed or skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc complete. |
| 12 | Supply and fixing of butt hinges, extruded aluminum alloy, anodised, with galvanised mild steel hing pin, type C-21,100mm size, ISI marked, complete all as specified and directed. |
| 13 | Supply and fixing of 200mm long, aluminium anodised, barrel tower bolts of extruded section and fix to wooden or PVC doors, complete all as specified and directed. |
| 14 | Supply and fixing of 150mm long extruded aluminium alloy handles, fabricated type , anodised, complete all as specified and directed. |
| 15 | S & F of sliding door bolts 300mm long of extruded sections aluminum alloy, anodised, with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections also bolts and sliding bolts of extruded sections or cast aluminium alloy dia of bolt not less than 12mm. Complete all as specified and directed. |
| 16 | S & Fof 300mm long ordinary rat rail rod pattern MS door springs including roller and roller plate. |
| 17 | S & F in repair of 200mm long, aluminium anodised, barrel tower bolts of extruded section and fix to wooden or PVC doors, complete all as specified and directed. |
| 18 | S & F in repair of 150mm long extruded aluminium alloy handles, fabricated type , anodised, complete all as specified and directed. |
| 19 | S & F in repair of sliding door bolts 300mm long of extruded sections aluminum alloy, anodised, with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections also fixing bolts and sliding bolts of extruded sections or cast aluminium alloy dia of bolt not less than 12mm. Complete all as specified and directed. |
| 20 | S & F in repair of 300mm long ordinary rat rail rod pattern MS door springs including roller and roller plate, as in repairs, complete all as specified and directd. |
| 21 | S & F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frame with first class hard wood bead, complete all as specified and directed. |
| 22 | S & F in repair of stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frame with first class hard wood bead, complete all as specified and directed. |
| 23 | M & L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 24 | M & L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coat of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 25 | M & L for welding in repairs exc 2.5cm but n.exc 5cm in length and thickness of metal n.exc 6mm, complete all as specified and directed. |
| 26 | S & F in repair of aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors/ windows/ ventilators with one or more rebates including joining cleat for fixing, with two or more glazed shutter and one or more as wire mesh shutter (as per site requirement) with Aluminium channel for roller track, wool pile, zinc alloy powder coated handles along with multi-point locking system, adjustable nylon rollers with SS 304 body, with provision of aluminium grill etc complete all as specified and as directed by Engr-in-Charge. |
| 27 | supply only 5.5mm thick tinted glass, rubber packing, glazing strips in aluminum frame at any position and any height etc complete all as specified and directed. |
| 28 | S & F in repair of 5.5mm thick tinted glass, rubber packing, glazing strips in aluminum frame at any position and any height including haking out old broken glass rubber packing, glazing strips etc complete all as specified and directed. |
| 29 | S & F in repair of drapery rod of stainless steel 25mm dia ribbed/fancy type including brackets and finals as required. |
| 30 | S & F in repair of drapery rod of mild steel (PVC coated) 25mm dia ribbed/fancy type including brackets and finals as required. |
| 31 | S&F in repair of door seal 50mm wide and 1 m in lenth built in aluminium black plate with nylon brush fixed with screws, complete all as specified. |
| 32 | S&F in repairs floor door stopper 140mm overall cover plate length of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified. |
| 33 | M & L for Anti termite treatment to wood and wood based material by drilling hole in the direction of 45 degree 150mm to 200mm deep at minimume 300mm distance in consecutive hole and applying emulsion of chemical of PREMISE or PAXTON mixed with water in the ratio of 1:20 by spraying machine minimume 250ML to 300ML emulsion should be insert in the each hole and for 3 to 4 round spraying to be done. Finally the chemical will be mixed with white cement and make it just like the paste and insert in the hole for the closing and better results etc complete all as per specification and as directed by Engr-in-Charge. |
| 34 | S&F of Modular kitchen cabinet with following specifications complete all as shown on drawing of Modular kitchen and approved by GE. (a) 18mm thick Marine plywood, grade BWP (IS:710), type BB with both side 1mm thick decorative choice laminate type 1 of surface finish, colour and pattern as approved, as in front and shutters with aluminium profile handles.(b) Carcass made up of combination of 0.50mm (body panels) and 1.20mm thick (Horizontal stiffener & leg channels), epoxy poylster powder coating with dry film and shelves made up of 0.50mm thick galvanised steel shelves.(c) Grossery Kit : Taiming Tranquil Solid Drawer 175mm, 304 grade stainless steel wire basket 525MM, 2 Drawer solid Tranquil Drarwers 350MM each, Dish Kit : 175mm Tranquil Drawer, 175mm cup and saucer wire basket , 350MM Wire Basket, Thali Holder 350MM, 200MM bottle pull out 2 layer utility of 304 Garde Stainless Steel. Wicker basket unit 450MM cane wood , undermount soft closing channels, weight bearing capacity of 35Kg each.(d) Hetich hinges with CED coating for extended edge bending of 2mm thick, corrosion resistance. Legs : Hetich make PVC legs with adjustable heights. Hardware & Screws made upof stainless steel.(e) Skirting : 100mm Rehau make PVC Co-extruded skirting in metallic silver color or as approved.Make : Godrej/ Sleek/ Kutchina as approved by accepting officer. Product compliant of ISO 14001/ISO 45001/ISO 50001 & IGBC Greenpro. |
| 35 | Dismantling of boarding any description fixed in any position with screws. |
| 36 | S&F of 18/19 mm thick Block boards, grade 2 quality, interior grade, with decorative face veneer on both side with decorative choice lamination as approved by GE fixed with screws to timber frame work including 6mm thick teak wood beading all around complete all as specified and directed. |
| 37 | S&F in repairs 125mm long fancy type extruded brass handles, fabricated type fixed with nut screw and washer complete all as specified and directed. |
| 38 | S&F in repairs plastic body Magnetic catcher with iron plate to be fixed with shutters of kitchen cabinet approved pattern and shape fixed with screws on wooden/ plywood surfaces all as specified and directed. |
| 39 | S&F in repairs of 100mm stainless steel butt hinges medium weight fixed with Stainless Steel Screws etc complete all as specified and as directed. |
| 40 | M & L for 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work as in kitchen cabinat / cupbord and similar work fixed in repair ect complete all as specified and as directed. |
| 41 | M & L for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work as in kitchen cabinat / cupbord and similar work fixed in repars ect complete all as specified and as directed. |
| 42 | S&F 0.9mm thick Sunmica of choice coloure / pattern as in kitchen cabinates, cupboard / wardrobes etc and fixed with high quality adhesive after preparation and cleaning the surfces of the substrate etc complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F in repairs Telescopy channels, power coated with ball bearings, suitable for sliding SS kitchen bracket 60 cm long long standard width,fixed over 2nd class hard Wood rectangular fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillets fixed on cuddapah stone with screws ,all as specified and directed. |
| 44 | M & L for 12mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws as in kitchen cabinet shutters/drawers etc complete all as specified and as directed by Engr-in-Charge. |
| 45 | S & F in repairs kitchen plate racks made of rust resistant stainless steel of 1mm thick with provision of 8 to 15 vertical slots measures roughly of size 450mm x 600mm of rust -proof electro polished or lacqer-sealed for water exposure , fixed with screws on wall etc complete all as specified and as directed by Engr-in-Charge. |
| 46 | M & L for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice amination & other side balancing white lamination, fixed with screws to timber frame works as in repairs cupboard shutters, kitchen cabinet drawers etc complete all as specified and as directed. |
| 47 | S&F in repairs stainless steel sinks with drainage board made out of 1.00mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32mm dia and making good to disturbed surfaces complete all as specified. |
| 48 | S & F in repairs PVC cabinet mirror of selected quality of standard size and fixed to wall etc complete all as specified and directed. |
| 49 | S&F in repairs looking mirror 600 mm x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood with decorative type wooden frame and fixed to wooden plugs with steel screws, complete all as specified. |
| 50 | S & F in repair of Brass mortice night latch 4 levers, vertical type, 100mm size include for escutcheon plates and two keys suitable for doors. Complete all as specified and directed. |
| 51 | S & F, in repair wash basins Vitreous China (flat back type) 550x400mm in size including cutting for and pinning in ends of brackets or erecting stand, fixing of supply and waste pipe including Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms.) |
| 52 | S & F in repair vitreous chinaware wash down water closet squatt pan (Orissa pattern/Indian type) of size 580mmx440mm, white, with integral foot rests (excluding flushing cistern and flush pipe) but including 100mm CI ‘P’/’S’ trap), set and jointed including embedding concrete. |
| 53 | S & F in repair of vitreous china wash down water closet EWC (pedestal pattern) with including fixing bolts, plastic seat and cover white with mild steel chromium plated or annodised hinging devices, connected to drain outle. |
| 54 | S & F in repair of Plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devices, connected to drains outlet. |
| 55 | S & F in repair of PVC low level, white, flushing cistern valveless, symphonic action type, 10litre capacity with inlet, ball valve, float and handle including PVC flush pipe 32mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connection to water supply pipe line and WC, complete all as specified and directed. |
| 56 | S & F in repairs of doors with chowkhats and shutters of size exceeding 1.5 sqn and n.exc 4 sqm with provn of angle iron chowkhats and plain galvanised iron sheet's shutters with cross bracing of back side including (taking down of existing doors ),all fittings like locking arrangements, fixing arrangements, painting and making good the surface / wall etc complete all as specified and as directed by Engr-in-Charge. |
| 57 | S & F in repair of Plain solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender