Tender For Annual Rate Maintenance Contract For Repair, Renovation, Maintenance And Emergent Civil Works (Up To 1,00,000/- Per Work) In The University Buildings And Other Properties Of Jamia Millia Islamia.
Tender Value
1 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
12 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Rate Maintenance Contract For Repair, Renovation, Maintenance And Emergent Civil Works (Up To 1,00,000/- Per Work) In The University Buildings And Other Properties Of Jamia Millia Islamia.
BOQ
| Sl. No. | Item Description |
| 1 | Area Rate Contract |
| 2 | On DSR 2023 All Items (As per Requirment) |
| 3 | Modified Estimated Cost after using correction factor on DSR 2023 on account of GST @ 0.973 * X = 0.973X |
| 4 | MARKET RATE ITEMS |
| 5 | Disposal of malba from site by mechanical or manual transport out site Shifur Rehman schoole Campus as per direction of Enginner Incharge. |
| 6 | Providing and fixing C.P. brass two in one bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 7 | P/F PVC cover for 500 to 2000 ltr. Tanks I/c fixing of locking arrangement |
| 8 | Providing and fixing of pvc speed breaker 350x250x50 mm filled with cement concrete (cement concrete cost will be paid separately) fixed with heavy nails at different places in JMI. |
| 9 | Providing and fixing sinage board with 2 mm alumunium sheet with florescent tape of speed limit at different places in JMI. |
| 10 | Providing and Fixing 60 cm convex mirrior with post at different places in JMI. |
| 11 | Providing and fixing agronet green mesh as per direction of Engineering Incharge. |
| 12 | Fencing with wooden ballies post of size minimum dia 75 mm and height 3100 mm placed at required distance embedded in brick beds ,excavation of earth work,(earth work and brick bed paid seperatly) fixing of G.I sheet with the required nails. as per direction of engineer Incharge complete. (G.I sheet provide by the department.) |
| 13 | Providing and Fixing of Glass films for fixing on existing window and aluminium partition glass for reduces the amount of heat and radiation causedby the sun’s rays. Make -Garware Sun Control, b Film 70% Thickness -1 Mil Visible Light Transmittance -70% |
| 14 | Providing & fixing of 10 mm clear polycarbonate sheet 2 uv, with complete fixing materials 50 mm aluminium section top /bottom EPDM rubber gasket, self drilling screws. SABIC (LEXAN MAKE). |
| 15 | Providing and fixing polythene to protect the roof from leakage of water, wt. of polythene not less than (1.30 kg / 10 smq). |
| 16 | Providing & Fixing Prestige Jaquar Conti Health Faucet PVC Chrome Plated with lead. |
| 17 | Rubbing & Polishing on mosaic/marble /Kota stone floor work wherever required to give high glass finish complete. |
| 18 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Note Hard Stone supply by the deparment. |
| 19 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Note: Hard Stone Supply by the Deapartment. |
| 20 | Painting with Floor Coat Emulsion paint of approved brand and manufacture to give an even shade : |
| 21 | PVC tank repair by hot air welding using HDPE material , uses a nozzle to blow hot air onto the HDPE material and as directed by Engineer In charge. |
| 22 | 500 litre water tank |
| 23 | 1000 litre water tank |
| 24 | 2000 litre water tank |
| 25 | 5000 litre water tank |
| 26 | WATER PROOFING: Mirco cleaning the surface with brushing , brooming , washingetc.Laying Fiber Mesh / Tape at the joints if required.Applying 2 coats of NEOPROOF RC 202 (Rubberized Elastomeric Liquid Membrane Black) admixed waterApplying Succeeding coats of NEOPROOF RC 200 (High quality waterproofing membrane white) Admixrd with water. |
| 27 | Providing & Fixing Acylic sheet 3 mm thick with putty and nails wherever necessary including racking out the old putty: |
| 28 | Providing and fixinf Hindware or Somany Floor mount / wall mounted “S / P” Trap One Piece Western Toilet/Water Closet/Commode With Soft Close Toilet Seat Cover PREMIUM GRADE FLOOR MOUNTED Western |
| 29 | Providing and fixing 10mm thick frameless toughened glass for window of approved brand and manufacture, including providing and fixing top & bottom pivot & fixing arrangement and making necessary holes etc. for fixing required , all complete as per direction of Engineer in charge. |
| 30 | Providing and fixing 32mm PPR Ball Valve is a thermoplastic valve for water systems, featuring a PPR body, a rotating ball with a central hole for flow control, a stem, and a handle, designed for hot/cold water, offering high chemical resistance, leak-proof operation, and typically rated for 10 Bar pressure at 0-95°C |
| 31 | Providing and fixing 40 mm PPR Ball Valve is a thermoplastic valve for water systems, featuring a PPR body, a rotating ball with a central hole for flow control, a stem, and a handle, designed for hot/cold water, offering high chemical resistance, leak-proof operation, and typically rated for 10 Bar pressure at 0-95°C |
| 32 | Providing and fixing 75 mm PPR Ball Valve is a thermoplastic valve for water systems, featuring a PPR body, a rotating ball with a central hole for flow control, a stem, and a handle, designed for hot/cold water, offering high chemical resistance, leak-proof operation, and typically rated for 10 Bar pressure at 0-95°C |
| 33 | Providing & fixing Acrylic clear sheet with Polished Stainless Steel Ss Pop Rivets including drilling holes as required, in steel doors, windows, clerestory windows, all complete with : |
| 34 | 3 mm thick clear acrylic sheet |
| 35 | 4 mm thick clear acrylic sheet |
| 36 | Providing and fixing 63 mm PPR Ball Valve is a thermoplastic valve for water systems, featuring a PPR body, a rotating ball with a central hole for flow control, a stem, and a handle, designed for hot/cold water, offering high chemical resistance, leak-proof operation, and typically rated for 10 Bar pressure at 0-95°C |
| 37 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :( Bricks Supply by the Department) |
| 38 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:(brick supply by the department) Cement Mortar 1:4 |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Gate Valve , having thermal stability for hot & cold water supply. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work and External work. |
| 40 | CPVC Gate Valve 25 mm |
| 41 | CPVC Gate Valve 32 mm |
| 42 | P/F PVC cover for 5000 to 10000 ltr. Tanks I/c fixing of locking arrangement |
| 43 | Providing and fixing 40 mm dia uPVC pipe (Schedule 40/80) including cutting, jointing with solvent cement, and fixing to walls/ceilings with clamps. Rate includes all necessary plain elbows, tees, fittings, pressure testing, and labor. |
| 44 | Providing and fixing 32 mm dia uPVC pipe (Schedule 40/80) including cutting, jointing with solvent cement, and fixing to walls/ceilings with clamps. Rate includes all necessary plain elbows, tees, fittings, pressure testing, and labor. |
| 45 | Providing and fixing PTMT (Polytetraethylene Terephthalate) wall mixer of approved make and color. Rate includes connection to hot and cold water inlets, wall flanges, sealing/grouting, testing for leaks, and all necessary labor and tools. |
| 46 | Providing and fixing PTMT central hole basin mixer of approved make and color. Rate includes installation on washbasin, flexible connection pipes, under-counter fixing nuts, testing for leaks, and all necessary labor and tools. |
| 47 | Providing and fixing PTMT (Polytetraethylene Terephthalate) swan neck tap with 360° swivel cast spout of approved make and color. Rate includes table/wall mounting, aerator nozzle, rubber washers, extension nipples, leakage testing, and all tools and labor. |
| 48 | Providing and fixing Chrome Plated (C.P.) Brass swan neck pillar cock of 15 mm nominal bore with a 360° swivel casted spout. Rate includes deck/table mounting on washbasin, water-saving foam-flow honeycomb aerator, brass chuck nuts, rubber washers, leak-proof testing, and all tools and labor., (Jaquar Continental/Florentine series, Parryware Jade): |
| 49 | Providing and fixing PTMT (Polytetraethylene Terephthalate) wall-mounted two-in-one bib cock (2-way bib tap) of 15 mm nominal bore with dual independent control knobs/levers. The rate includes a matching wall flange, standard foam-flow/aerator nozzle on the primary outlet, male threaded inlet connection compatible with standard Indian plumbing, testing for leaks, and all necessary tools, materials, and labor. |
| 50 | Providing and fixing PTMT (Polytetraethylene Terephthalate) wall-mounted two-in-one angle valve (2-way angle cock) of 15 mm nominal bore with dual independent control handles. Rate includes a matching PTMT wall flange, threaded inlet connection compatible with standard concealed plumbing lines, dual independent water flow outlets (for simultaneous connection of geysers, health faucets, or cisterns), pressure/leakage testing, and all necessary tools, Teflon tape, and labor. |
| 51 | Providing and fixing Chrome Plated (C.P.) Brass wall-mounted two-in-one angle valve (2-way angle cock) of 15 mm nominal bore with dual independent quarter-turn control levers/knobs. Rate includes a matching heavy brass wall flange, high-grade ceramic disc cartridges, standard 1/2\\" BSP threaded connections, pressure testing for leaks, and all necessary tools, Teflon tape, and labor. |
| 52 | Supply and delivery at site of common burnt clay F.P.S. (non-modular) tile bricks of class designation 10 (minimum compressive strength 10 N/mm²), conforming to IS: 13757 / IS: 3495 standards. Bricks must be hand or machine molded, uniform in deep red/cherry color, thoroughly burnt, free from cracks, flaws, nodules of free lime, and organic matter, with sharp rectangular edges. Rate includes sourcing, loading, transit, unloading, and uniform stacking at the designated site location at all levels. |
| 53 | Repair of cracks in plaster after dismentling plaster 25 cm wide with inserting 8 mm dia TMT Bar 23cm long 30cm apart in recess of brickwork 15 mm wide 15 mm deep.The recess filled with cement mortar 1;3 ( I cement :3 coarse sand ) complete |
| 54 | Grouting the joints of existing ceramic tile flooring of size 300mmx300mm with white cement i/c raking of joints of existing flooring in any colour complete in all respect as directed by Engineer in charge |
| 55 | The estimated cost of each individual civil work allotted under the Annual Rate Contract (ARC) shall not exceed ₹1,00,000 (Rupees One Lakh only). Each work shall be separately identified, properly estimated, technically sanctioned, and allotted in accordance with the applicable rules. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender