Tender For Adding 03 Nos. 132Kv Bay Alongwith 01 No. 132Kv Transfer Bay For 132Kv Katka Tss At 220Kv Substation Raja Ka Talab Under Electricity Transmission Division-I, Varanasi
Tender Value
55.06 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
27 days left
EMD
65000
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Adding 03 Nos. 132Kv Bay Alongwith 01 No. 132Kv Transfer Bay For 132Kv Katka Tss At 220Kv Substation Raja Ka Talab Under Electricity Transmission Division-I, Varanasi
BOQ
| Sl. No. | Item Description |
| 1 | Part-(A)-Supply |
| 2 | 145KV Isolator Clamp Zebra |
| 3 | 145KV Bolted type gun fitting Tarantulla |
| 4 | 145KV Bolted type gun fitting Zebra |
| 5 | 145KV Single suspension fitting Zebra |
| 6 | 145KV Single suspension fitting Tarantulla |
| 7 | Bus Post Clamp suitable for Zebra conductor |
| 8 | 40mm MS round bar for Main Earthmat |
| 9 | 40mm dia. MS electrodes of 3meter length |
| 10 | 75x10mm MS Flat |
| 11 | 50x6mm MS Flat |
| 12 | PG clamp Zebra to Tarantulla |
| 13 | PG clamp Zebra to Zebra |
| 14 | PG clamp Zebra to Panther |
| 15 | PG clamp Panther to Panther |
| 16 | Galvanised Nut/Bolt M16x35mm |
| 17 | Galvanised Nut/Bolt M16x40mm |
| 18 | Galvanised Nut/Bolt M16x45mm |
| 19 | Data connector unit (DCU) / Communication Gateway (IG) |
| 20 | Netwwork Switch-16Port (14 Cu + 2 Fo) |
| 21 | LAN Cable |
| 22 | GI perforated tray (225/250mm) |
| 23 | carbon dioxide 4.5 kg fire extinguisher |
| 24 | Dry chemical type 4.5Kg fire extinguisher |
| 25 | 50 Litre Mechanical foam Trolley mounted |
| 26 | carbon dioxide 9 kg |
| 27 | carbon dioxide 22.5 kg |
| 28 | Sand Buckets |
| 29 | Sand bucket stand suitable for 10nos. Bucket |
| 30 | Part-(B)-Work |
| 31 | Erection of Main & Auxiliary Structure, equipments etc. required for installation of CTs, PTs, CVTs, Breaker, LAs etc. at 220KV S/S Raja Ka Talab. Job consist shifting of all material i.e. equipments, structure parts, nuts, bolts, washers etc, from store to site of erection. Erection of structure as per relevant drawing and using flat/spring washer with each bolt matching holes, cutting notching of members if required shall also be done by the contractor without any extra cost of complete the work satisfactorily. All material to be erected shall be supplied by UPPTCL free of cost but all men, material and T&P required for satisfactorily completion of work shall be arranged by the contractor on his own cost. |
| 32 | Lattice type main and aux structure |
| 33 | 145 KV SF6 Circuit Breaker |
| 34 | 145 KV Bus/Line Isolator |
| 35 | 145 KV CT/PT |
| 36 | 145 KV CT/PT Junction Box |
| 37 | 120 KV Lightinng arrester |
| 38 | 145 KV Tandom isolators |
| 39 | 145 KV Isolator Junction box |
| 40 | 145 KV Post Insulator for Support |
| 41 | Erection of control & relay panel including shifting form store to erection site and proper earthing of panel and all associated work to complete the job satisfactorily. Work also include termination of all control cable in panel and associated equipment such as CB LSI BSI CT PT Commissioning and all associated works. |
| 42 | Stringing of Main Bus Bar per phase (12Mtr Span) . The work include fitting of tension clamp, hoisting of insulator, cutting of conductor and also shifting of all material from store site to switchyard site and all other associated work. |
| 43 | Extension / Stringing of Main Bus Bar per phase (30Mtr Span) above existing 132KV Kachhawa-II bay from main bus bar to gantry . The work include fitting of tension clamp, hoisting of insulator, cutting of conductor, jumpering and also shifting of all material from store site to switchyard site and all other associated work. |
| 44 | Stringing of Transfer Bus Bar per phase (12Mtr Span) . The work include fitting of tension clamp, hoisting of insulator, cutting of conductor and also shifting of all material from store site to switchyard site and all other associated work. |
| 45 | Interconnection & jumpering of various 132 KV equipments/ Bus with ACSR Panthor between Main / Transfer Bus Conductor with the help of suitable PG clamps (to be provided by department) with all other associated works for satisfactory completion of the job as per technical specifications. (1 Job includes Interconnection and jumpering of all the equipments in one Bay) |
| 46 | Fabrication of 3 metre long electrode with 40 mm diameter MS round bar having 150mm long conical shape by cutting, straightening, etc then piercing it vertically inside the ground 700mm below the ground level including excavation of earth jointing welding and if other associated work with all their cost T&P labour and material except MS rod |
| 47 | Laying of earthmat (40mm diameter MS round bar) 700 mm below ground level after excavation including cutting strengthening welding and all other associated work to be complete the job excluding the cost of M S round bar |
| 48 | Making of 150mm long lap joint of above laid 40mm dia round bar by cutting strengthening welding on both side of leg joint. |
| 49 | Making of cross joint of above laid 40mm dia MS round bar 700mm below the ground level by welding at all 04 corners including providing and welding of suitable size 02nos MS angle pieces on opposite corner of cross joint |
| 50 | Making of end joint of above laid 40mm MS round bar with top of the already vertically pierced MS electrodes, 700mm below the ground level by welding |
| 51 | Earthing of all equipment of structure by using MS flat below 600 mm form ground level and connecting it with existing Earthmats includes back filling of excavated earth its leveling and proper ramming and associated works including the cost of labour and T&P required to complete the job satisfactorly |
| 52 | 75x10mm |
| 53 | 50X6mm |
| 54 | Painting of erthing strip above the ground level by one coat of red oxide and two coat of green paints. Paint will be provided by contractor. All men, extra material(if required any) & T&P will be provided by contracor without any extra cost. |
| 55 | 75x10mm |
| 56 | 50X6mm |
| 57 | Laying of following sizes of Copper control Cables in the Cable trenches from various equipments/marshalling boxes/J.B.s in switchyard to control/relay panels in Control Room as per cable schedule, its saddling with 25x 33 A.I saddle to every 750mm distanceand termination of control cable of control panels, Relay panel, CT. PT CB Isolator, ACDB. DCDB, Control Room and Switchyard. including carriage of cable drum from store to site and shiftin back to store and all other associated work to be complete the job saisfactorly as per technical specification. |
| 58 | 2 core x 2.5 Sq. mm Control Cable |
| 59 | 4 core x 2.5 Sq. mm Control Cable |
| 60 | 6 core x 2.5 Sq. mm Control Cable |
| 61 | 10 core x 2.5 Sq. mm Control Cable |
| 62 | Termination of following size control cable as laid above as per cable schedule including making necessary holes in glands plate of junction boxes, supply and fixing of cable gland ferrule of appropriate size and quantity respectively for each core of cable and its termination with crimping type lugs including lugs, ferrules & other minor accessories to complete job satisfactory |
| 63 | 2C x 2.5 mm² |
| 64 | 4C x 2.5 mm² |
| 65 | 6C x 2.5 mm² |
| 66 | 10C x 2.5 mm² |
| 67 | Carriage of sub station structure by private carrier from EFU Naini Prayagraj to 220KV Sub Station Raja Ka Talab. Job includes loading of material by shifting of these from storage place to road side, safely loading of these on vehicle, transportation of materials from EFU Naini Prayagraj to 220KV S/S Raja Ka Talab by private vehicle having one side distance approx. 100Kms. Unloading of material from vehicle safely and shifting these to store and proper stacking. (Rate includes all labour, T&P charges and all associated work to perform the job satisfactorily) |
| 68 | Dismantling of following equipments alongwith its structure of 132KV Kachhwa-II feeder and shifting these to work place at new site at 220KV S/S Raja Ka Talab |
| 69 | 145 KV SF6 Circuit Breaker |
| 70 | 145 KV Bus/Line Isolator |
| 71 | 145 KV CT/PT |
| 72 | 145 KV CT/PT Junction Box |
| 73 | 120 KV Lightinng arrester |
| 74 | 145 KV Tandom isolators |
| 75 | 145 KV Isolator Junction box |
| 76 | Providing and fixing of 160 watt LED light make syska/ Philips/ Bajaj etc. along with MS bend pipe (2\\"dia 1.25 mm long) and fitting of clamp etc. Proper connection with AC supply |
| 77 | Supply and fixing of equipment name board. Work includes fabrication of Equipment/ Bay name board made of M.S. angle Iron 50x50x6 mm, 03 feet long support and MS board of 2x1 MS sheet 18 SWG and MS flat Iron 25x6mm size 2x1 feet welded on MS sheet after then MS pipe of 1.5 inch dia. Fitted around MS flat on the sheet board and 0.5mm dia MS pipe 04 feet long welded in MS angle Iron from two places at one side and two at other to complete the display board. Digging pit size 2x2x3 feet and grouting above board with 1:2:4 cement, ballast, sand ratio and making plinth of size 1x2 feet. Board shall duly painted by yellow color and equipment name board shall be written in black. All material shall be provided by contractor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender