Tender For Addition, Alteration And Extension Of Existing Creche,1St Floor, Annexe Building, Rbi Lucknow
Tender Value
7.31 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
8 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition, Alteration And Extension Of Existing Creche,1St Floor, Annexe Building, Rbi Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Addition, alteration and extension of existing creche,1st floor, Annexe Building, RBI Lucknow |
| 2 | Providing, laying and installation of Banks approved 25 mm thick interlocking soft flooring of approved shade, thickness, design and finish.The flooring shall be laid as per manufacturer's specifications and directions of the Engineer-in-Charge including all the required accessories, underlayer, fittings etc. all completed.Note: Basic price of flooring is 1731.71/- per Sqm. Exclusive of taxes, cartage and CP. Please refer tender document for more details. |
| 3 | Providing and fixing 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 2 77 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks). Please refer tender document for more details. |
| 4 | Providing and fixing 16 mm thick beveled tegular mineral fibre false ceiling tiles (NRC 0.55 to 0.6) at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.Please refer tender document for more details. |
| 5 | Providing and Finishing walls, ceiling or any other surface with two or more coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Please refer tender document for more details. |
| 6 | Providing and Finishing walls, ceiling, or any other other surface with two or more coats of water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Please refer tender document for more details. |
| 7 | Providing and fixing wallpaper on ceiling, walls etc. of Bank's approved design, shade, colour, thickness, and finish.The fixing shall be carried out as per manufacturer's specifications or standard practice, preparation of surface by providing and applying cement-based primer and directions of the Engineer-in-Charge including all the required accessories, pasting agent etc. all completed.Note: Basic rate of wallpaper is 959/- per Sqm. Exclusive of taxes, cartage, and CP. Please refer tender document for more details. |
| 8 | Providing and fixing wood frame of Second-class teak wood in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length. The rate shall also include providing and fixing hold fast lugs or dash fastener as per the requirement at the site. Please refer tender document for more details. |
| 9 | Providing and fixing ISI marked 30 mm thick flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. The rate shall also include providing and fixing minimum 6 mm thick teakwood lipping all around the door and making provision for vision panel of approved size with 5-8 mm thick toughened glass along with beading etc. all complete as directed. Please refer tender document for more details. |
| 10 | Providing and fixing followings fittings to the door- Stainless Steel ball bearing hinges. Please refer tender document for more details. |
| 11 | Providing and fixing followings fittings to the door- Brass Handles - Basic price for each piece is 3000/- per piece Exclusive of taxes, cartage, and CP. Please refer tender document for more details. |
| 12 | Providing and fixing followings fittings to the door- Mortise lock with cover - Basic price for each piece is 2800/- per piece. Exclusive of taxes, cartage, and CP. Please refer tender document for more details. |
| 13 | Providing and fixing followings fittings to the door- Tower bolt of 300 mm long - Basic price for each piece is 500/- per piece. Exclusive of taxes, cartage, and CP. Please refer tender document for more details. |
| 14 | Providing and fixing followings fittings to the door-Tower bolt of 200 mm long - Basic price for each piece is 300/- per piece Exclusive of taxes, cartage, and CP. Please refer tender document for more details. |
| 15 | Providing and fixing followings fittings to the door-Providing and fixing brass Door Closure -Basic price for each piece is 2500/-. Exclusive of taxes, cartage, and CP. Please refer tender document for more details. |
| 16 | Melamine Polish on New WorkProviding and polishing in high gloss/matt finish melamine clear polish on woodwork in required colour/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sandpaper 80/120 no. and then with sandpaper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) Please refer tender document for more details. |
| 17 | Carefully cutting and making provision in wooden partition wall for providing and fixing of wooden chowkhat and flush door including disposal of unserviceable/debris material from the Bank's premises etc. all complete as directedly the Engineer-in-charge. Please refer tender document for more details. |
| 18 | Carefully dismantling brick work manually/ by mechanical means including disposal of unserviceable/debris material from the Bank's premises etc. all complete as directed by the Engineer-in-charge.Note: - (1) The dismantling work shall be carried out carefully with all the protection and necessary guarding of nearby existing creche facility and its equipment’s. This work will be carried out in last phase of the work of after completion of abovmentioned work in extended creche.(2) The rate shall include repairing and making good the nearby area with cement plaster of ratio 1:4 (1 Cement:4 sand). Please refer tender document for more details. |
| 19 | Providing and fixing 4mm thick veneer of the desired finish and design over flush door, plywood on wall or ceiling as required and as per the design (wherever required) including priming coat on unexposed surface. The teak veneer shall be carefully pasted with Synthetic Resin-based waterproof wood adhesive (Fevicol Marine or approved equivalent), nails in desired design and drawing etc. all complete as directed by the Engineer-in-charge. Note: Basic rate of veneer is 1000/- per Sqm. Exclusive of taxes, cartage and CP. Please refer tender document for more details. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender