Tender For Provision Of Temperature And Humidity Sensor For Bldg No. P-1155, P-697, P-575 And P-1059 Under Ge (Nw) Karanja
Tender Value
43.46 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
20 days left
EMD
86920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Temperature And Humidity Sensor For Bldg No. P-1155, P-697, P-575 And P-1059 Under Ge (Nw) Karanja
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, installation, testing and commissioning of smart temperature & humidity sensor with IP 42 display 6 to 7 inch (Temperature and Humidity Transmitter shall be specially designed for industrial applications). It shall be consist of three installation methods: wall-mounted, duct type, and split. The three output modes of current, voltage, and RS485 are optional. The on-site adaptability should be strong and the terminal design should be suitable for rapid installation. It will be widely used in computer rooms, HVAC, buildings, warehousing and other places where temperature and humidity measurement is require, complete all as specified and directed by Engr-in-Charge. |
| 2 | Supply, installation and testing of Etharnet converter suitable for RS485 to Etharnet complete all as specified and directed by Engr-in-Charge. Make :Honewell /Siemens/Schneider/Softhard |
| 3 | Supply, installation and testing of microprocessor based PLC system with IO as per site requirement and communication port etc. complete all as specified and directed by Engr-in-Charge.Make :Honewell /Siemens/Schneider/Softhard |
| 4 | Supply, installation and testing of smart microprocessor-based display for temperature and humidity for monitoring with communication inside / outside fitting at building, complete all as specified and directed by Engr-in-Charge. |
| 5 | Supply, installation and testing if interface converter between monitor application & Field device complete all as specified and directed by Engr-in-Charge. Make :Honewell /Siemens/Schneider/Softhard |
| 6 | Supply, installation and testing of data transmitter gateway with field device to network connectivity complete all as specified and directed by Engr-in-Charge. Make :Honewell /Siemens/Schneider/Softhard |
| 7 | Supply and Fixing of application monitoring device in command center complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply and Fixing and testing of control transformer 110 VAC with 100VA complete all as specified and directed by Engr-in-Charge.Make :Honewell /Siemens/Schneider/Softhard |
| 9 | Supply and Fixing and testing of wall-mount enclosures for device storage & safety with specially designed bottom openable feature for ease of access, IP 65, complete all as specified and directed by Engr-in-Charge. |
| 10 | Supply Fixing and testing Wall-mount Enclosures for BMS unit Storage & Safety with specially designed bottom open able feature for ease of Access IP 65 complete all as specified & directed. Make :Honewell /Siemens/Schneider/Softhard |
| 11 | Supply & Fixing and testing of wall mount 12U Rack 500D, Glass Door 550W 9U-With Lock & Key Front Only, Single Fan, 1u Cable Manager-Loop, 2u Standard PDU with 6 sockets Round Pin 230 Volts AC 5/15 AMP with Plug, Mounting Hardware (Pack of 10) etc. complete all as specified and directed by Engr-in-Charge.Make :Honewell /Siemens/Schneider/Softhard |
| 12 | Supply & Fixing and testing of wall mount 6U Rack 500D,Glass Door 550W 9U With Lock & Key Front Only, Single Fan, 1u Cable Manager-Loop, 2u Standard PDU with 6 sockets Round Pin 230 Volts AC 5/15 AMP with Plug, Mounting Hardware (Pack of 10) complete all as specified and directed by Engr-in-Charge.Make :Honewell /Siemens/Schneider/Softhard |
| 13 | Supply, Laying/ Fixing in trenches or wall and testing of commscope fiber 6 Core SM cable complete all as specified and directed by Engr-in-Charge.Make :BCH/Havells/polycab |
| 14 | Supply, fixing and testing of Commscope Fiber LIU 24 Core SMM Loaded complete all as specified and directed by Engr-in-Charge. |
| 15 | Supply, fixing and testing of Commscope Fiber LIU 12 Core SM Loaded complete all as specified and directed by Engr-in-Charge. |
| 16 | Supply, fixing and testing of Commscope Fiber LIU 06 Core SM complete all as directed by Engr-in-Charge. |
| 17 | Supply, fixing and testing of Commscope Fiber Patch Cord SM LC-LC 3 Mtr complete all as directed by Engr-in-Charge. |
| 18 | Supply, fixing and testing of Cisco C1300-8P-E-2G complete all as directed by Engr-in-Charge.Make :Honewell /Siemens/Schneider/Softhard |
| 19 | Supply, fixing and testing of Cisco C1300-24T-4G complete all as directed by Engr-in-Charge.Make :Honewell /Siemens/Schneider/Softhard |
| 20 | Supply, fixing and testing of Cisco GLC-LH-SMD 1000BASE-SX SFP modules for SM Fiber complete all as directed by Engr-in-Charge. |
| 21 | Supply, fixing and testing of Services Rack , Fiber Splice, Switch Mounting etc with connected items etc. complete all as directed by Engr-in-Charge. |
| 22 | Complete installation, commissioning, programming and testing of entire system max 9 day by deputing the company rep along with adequate labour as required at site, complete all as directed by Engr-in-Charge |
| 23 | Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in any type of soil complete all as specified and directed. Note: Excavation for laying of cable shall be carried out manually to avoid and damage of existing HT/LT cable and OFC cable etc. |
| 24 | Returning filling in including spreading leveling watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed. |
| 25 | Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 26 | Supply & laying of 40mm outer dia, SN-4, double wall corrugated (DWC) duct pipe conforming to IS 16205 (Part 24) with antirodent and non flame propagating properties of approved colour including with fittings & fixtures as in cable protection complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender