Tender For Maintenance Of Old Type-Ii Quarter On The Left Side Of Main Gate At Amarpur Sub-Jail During The Year 2025-26 ./Sh:Dismantling Works, Platering, Brick Works, Wood Works, Aluminium Works, Grill Works , Floor Tiles, Marble Works, Sanitary Fit
Tender Value
24.22 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
10 days left
EMD
48443
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gomati → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Old Type-Ii Quarter On The Left Side Of Main Gate At Amarpur Sub-Jail During The Year 2025-26 ./Sh:Dismantling Works, Platering, Brick Works, Wood Works, Aluminium Works, Grill Works , Floor Tiles, Marble Works, Sanitary Fittings, Paint Works, Roof Grading, Chequred Tiles, Septic Tank, Soakpit Etc.(2Nd Call)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or pointing,raking out joints,cleaning and preparing the surface for replastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc. complete as per direction of the Engineer- in-charge. |
| 2 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:- Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sqm and below. |
| 4 | Dismantling steel work in built up section in channels, angles, tees, flats including all gusset plates, bolts, nuts, cutting rivets, welding including dismembering and stacking of serviceable materials and nserviceable materials separately with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge. |
| 5 | Dismantling old glass panes from wooden / steel structures including stacking of serviceable materials and disposal of rubbish and unserviceable materials to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- incharge. |
| 6 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of gineer-in-charge : 15 mm to 40 mm nominal bore(Internal) |
| 7 | Above 40 mm nominal bore(External) |
| 8 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge:- In cement mortar. |
| 9 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge. |
| 10 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 11 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 12 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil |
| 13 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centring andshuttering -All work upto plinth level:1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate20 mm nominal size) |
| 15 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded wellburnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal sizewell rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 16 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 17 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement:- All work upto plinth level:- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 18 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishing and reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 19 | Centering shuttering including struttings, propping etc. and removal of form work for:Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 20 | First class brick work in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 21 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 22 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 23 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framedand fixed in position :- Local Teak Wood |
| 25 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous finecellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical &horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mmthick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panelshall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications anddirections of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws andelegant look.( for W.C. bathroom door shutter). |
| 26 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veeners on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 27 | Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers anda pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles withnecessary screws etc. complete (Best make ofapproved quality) |
| 28 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square orround bars etc. all complete.Fixed to openings /wooden frames with rawl plugs screws etc. |
| 29 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3fine sand : 6 graded stone aggregate 20mm nominal size) |
| 30 | Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete :250 x 10 mm |
| 31 | Providing and fixing bright finished brass handles with screws etc. complete : 100 mm |
| 32 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., includingwelding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per the approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 33 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast/anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessaryfittings, including applying a priming coat of approved steel primer etc. complete as required. |
| 34 | Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid onfloors, footpath & courtyard on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed withneat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing etc. allcomplete as per direction of Engineer-in-charge.Light shade pigment using white cement |
| 35 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost ofglass strips etc. all complete as per direction of Engineerin- charge. 40mm thick. |
| 36 | Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the anufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge. Glazed Vitrified Tiles (Glossy / Mat Finish/ Anti-Skid) Size of tile 600 mm x 600 mm |
| 37 | Extra for providing and laying Vitrified tiles (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622 - 2017, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. all complete as per direction of the Engineer-in-charge 10.45.1)Soluble Salt Stainfree vitrified tiles (Glossy) / Double charged Stainfree vitrified tiles (Glossy) / Glazed Vitrified Tiles (Glossy / Mat Finish/ Anti-Skid) / Glazed Vitrified Tiles - Full Body (Glossy / Mat Finish/ Anti-Skid) |
| 38 | Providing and laying 1st class quality ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. allcomplete as per direction of the Engineer in-charge.Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles,300 mm x 300 mm in all shades and designs |
| 39 | Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge. 450 mm X 300 mm in all shades and design |
| 40 | Providing and fixing Marble stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade,including rubbing and polishing etc. all complete as per direction of Engineer-in-charge.18 mm thick Marble stone,Raj Nagar plain marble |
| 41 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1cement :3 fine sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade 8mm thick Rajnagar marble tiles (polished) |
| 42 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as per direction of Engineer-in-charge .0.63mm thick with zinc coating not less than 275gm/m2 |
| 43 | 12 mm cement plaster of mix:- Cement mortar 1:4 (1 cement : 4 fine sand) |
| 44 | 15 mm cement plaster on the rough side of single or half brick wall of mix:- Cement mortar 1:4 (1 cement : 4 fine sand) |
| 45 | 6 mm cement plaster of mix :- Cement mortar 1:3 (1 cement : 3 fine sand) |
| 46 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming toIS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up ofgaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :- For fixed portion of approved quality:- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 47 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and makingprovision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately ):- Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 48 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the directionof Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 49 | Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality withnecessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-incharge:- 205 x 19 mm |
| 50 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surfaceeven and smooth complete. |
| 51 | Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete. Water thinnable cement primer |
| 52 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, ofapproved brand and manufacture to give an even shade [Payment shall be made after submission of TestCertificate issued by the Manufacturer] :- New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 53 | Wall painting with acrylic plastic emulsion paint of approved brand and manufacture to give an even shade[Payment shall be made after submission of Test Certificate issued by the Manufacturer] :- Two or more coats on new work |
| 54 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by theManufacturer] :- With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 55 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by theManufacturer] :-With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 56 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:- Two or more coats on new work |
| 57 | Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with : Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 58 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conformingto IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floorswherever required :- White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 59 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 60 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets andstainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:- Kitchen sink with drain board, 510x1040 mm bowl depth 250mm |
| 61 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 62 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall ofstandard shape with bracket of the same materials with snap fittings of approved quality and colours weighingnot less than 105 gms. |
| 63 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality and colour.600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain &m brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall a)15 mm nominal outer dia .Pipes. |
| 65 | b)20 mm nominal outer dia .Pipes. |
| 66 | c)25 mm nominal outer dia .Pipes. |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain &m brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall a)40 mm dia. nominal bore |
| 68 | b)75 mm nominal inner dia .Pipes. |
| 69 | c)100 mm nominal inner dia .Pipes. |
| 70 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 71 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 72 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 73 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 74 | Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design:100 mm diameter S. W. pipe |
| 75 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deepfor single pipe line Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender