Tender For E-Tender For Comprehensive Interior Renovation Of Ten (10) Departmental Wings In Nabard Head Office Building At Bkc, Mumbai
Tender Value
22.81 Crore
Estimated cost
Bid Submission
04 Nov 2026
17 days left
EMD
45.62 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E-Tender For Comprehensive Interior Renovation Of Ten (10) Departmental Wings In Nabard Head Office Building At Bkc, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling & Demolition Works |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) with frames and shutter of any height including chowkhats, architrave, holdfasts etc. complete and stacking the dismantled materials within the building compound at designated location including all leads & lifts, making good to the existing surface, providing necessary safety precautions for dismantling of doors, windows, etc. complete as instructed and directed. |
| 3 | Demolishing cement concrete/ brick masonry works manually/ by mechanical means including cleaning the site, lowering down the debris to the ground floor without casuding dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permisions for all lead and lift, etc. complete. as per direction of Engineer - in - charge. |
| 4 | Removing mosaic, cement marble, granites non-slippery, tandur, kotah, shahabad stone or Indian Pattern stone, glazed tiles of any thickness in flooring and dado of any height with the bedding cement mortar or tile adhesive including the scaffolding if required for removal of dado tiles and removing all debris, spalls, including cleaning the site, lowering down the debris to the ground floor without casuding dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permisions for all lead and lift, etc. complete. as per the direction of Engineer-in-charge. |
| 5 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling, firefighting, electrical cabling, low side AC ducting, etc. including cleaning the site, lowering down the materials to the ground floor without casuding dust nuisance and damage to the structure and carting away the unservicabel materials outside the building compound upto the municipal dump with required municipal permisions and stacking of serviceable material within the building compound at designated location for all leads & lifts, etc. complete as directed by Engineer- in-charge. |
| 6 | Dismantling/ Removal of the existing old plaster (both internal and external) of any thickness and at all levels by chisel & hammer / cutter plate or skirting including raking out joints and cleaning the surface for re-plaster. Rates quoted to include scaffolds required for the work, removing all debris, spalls, including cleaning the site, lowering down the debris to the ground without causing dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift. |
| 7 | Providing and Erecting full height barricading from floor to ceiling slab height along the entrance of the wings for proper demarcation of the working area/ wing from the rest of the office space and to cover the open sides of the site to avoid disturbance to the functioning of the regular office. The barricading shall be made before starting the demolition/ construction works. The barricading shall be made temporarily using plywood fixed to MS frame of suitable strength to prevent overturning and falling. The barricaded area shall be provided with the safety tapes, caution boards and other safety instructions. The barricading provided shall be retained in position till completion of the work. Rate to include its maintenance for damages, all labour, material, equipment, etc. completed including shifting of any existing items/ materials as per the instructions of the consultant/ NABARD. The barricading shall not be removed without prior permission and the same shall remain to be the property of the contractor after dismantling on completion of the works. |
| 8 | Plastering & Structural Repairs Works |
| 9 | Providing and applying 12 mm thick (average) internal plaster for walls by using premixed formulated readymade plaster mortar of approved brand and manufacturer, as per the manufacturer's recommendation, in single coat to concrete members- brick work etc at all heights and locations in internal areas including surface preparation, raking out joints, hacking concrete surface, finishing in smooth line and level, curing, scaffolding etc. complete. as specified and directed by the Engineer-in-Charge |
| 10 | Chipping and removing the loose/ unsound/ weak concrete with manual chisel and/ or by standrad power driven percussion type of approved make equipment upto reinforcing bars, without removing the reinforcement, including tapering of all edges, making square shoulders of cavities, removing all the loose materials, cleaning the surface by water jet pressure pump to make all the exposed surface free from dust, oil and all impurities, etc. and air drying the surface, etc. complete as directed for all locations. (Note:-Exposed Surface area prepared for repair of structural member shall be considered for payment) |
| 11 | Providing & applying anti corrosive treatment with zinc rich epoxy primer to the exposed reinforcement after removal of the corrosion in steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying alkaline chemical rust removal solution of approved make with brush and leaving the surface for at least 24 hours, then removing loose materials by scrubbing or with brush and thoroughly washing with water and allowing it to surface dry. After detachment of loose scales reddish rusted surface is still left exposed, this has to be retreated or as per approved manufacturers specifications. (Note:-Exposed Surface area prepared for repair of structural member shall be considered for payment) |
| 12 | Application of Corrosion Inhibitor: Providing & applying One coat of Concrete Penetrating Corrosion Inhibitor (Surface applied) which works on Bipolar Inhibition Mechanism on entire concrete surface to be repaired by using brush or spray at 250 ml per Sq.Mt./Coat or as per manufacturer’s specification and prior to application of first coat of anti corrosive coating to reinforcement. (Note:-Exposed Surface area prepared for repair of structural member shall be considered for payment) |
| 13 | Bond Coat: Providing & applying One coat of structural grade epoxy bond coat of approved make and brand by brush conforming to ASTM-881- 87 to the prepared concrete surface to be repaired / strengthened at the rate of 2.20 sq.m./ kg. This is applied prior to the application of polymer repair mortar / epoxy mortar / Microconcrete to have monolithic action between old concrete surface and new concrete surface at all locations as directed. (Note:-Exposed Surface area prepared for repair of structural member shall be considered for payment) Please Enable Macros to View BoQ information |
| 14 | Bond Coat: Providing & applying One coat of structural grade epoxy bond coat of approved make and brand by brush conforming to ASTM-881- 87 to the prepared concrete surface to be repaired / strengthened at the rate of 2.20 sq.m./ kg. This is applied prior to the application of polymer repair mortar / epoxy mortar / Microconcrete to have monolithic action between old concrete surface and new concrete surface at all locations as directed. (Note:-Exposed Surface area prepared for repair of structural member shall be considered for payment) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender