Tender For Connecting Baramulla-I Receiving Station With 33 Kv Delina Line From Receiving Station Jetty (Stand By Ring...... Alrernate Route) Under Ut Capex
Tender Value
45 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
25 days left
EMD
90000
Bank guarantee accepted
Document Fee
1001
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Connecting Baramulla-I Receiving Station With 33 Kv Delina Line From Receiving Station Jetty (Stand By Ring...... Alrernate Route) Under Ut Capex
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing and Commissioning of |
| 2 | Supply, Carriage upto site (including Loading/Unloading),Testing and Erection of Steel Tubular Pole, 13 Mtr. Long Pole (ST-410 SP-69) with planting depth of 1/6 th of the height of the pole, as per approved drawings/standards |
| 3 | Supply, Carriage upto site (including Loading/Unloading),Testing and Erection of Steel Tubular Pole, 11 Mtr. Long Pole (ST-410 SP-56) with planting depth of 1/6 th of the height of the pole, (11 mtr. Long ) as per approved drawings/standards |
| 4 | Supply, Carriage upto site (including Loading/Unloading), Laying ,Stringing, Tensioning & Binding of ACSR Conductor, (100 Sqmm ACSR Conductor-Dog) as per approved drawings/standards |
| 5 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of GI Channel/ GI V X Arms/Extension Top/Angle Iron/Flat/Belting Angle/Anti Skidding Clamps/Fuse plates of various sizes including clamps as per approved drawings/standards |
| 6 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of PG/T Clamps suitable for 200 Sqmm ACSR as per approved drawings/standards |
| 7 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm (reputed make)as per approved drawings/standards |
| 8 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm with disc fitting (reputed make) as per approved drawings/standards |
| 9 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33 kV Isolator with Earthing Blade (36kV,800A, Outdoor,3 poles, 25 kA) as per approved drawings/standards (1set = 3 No.) |
| 10 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Galvinized Nuts and Bolts as per approved drawings/standards |
| 11 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3mm as per approved drawings/standards |
| 12 | Supply & Laying of Cement bottoming 1:2:4 mix as per Standards 0.78 cum/pole including the Loading/ Carriage/ Unloading of required material. |
| 13 | Supply & Laying of Cement bottoming for 11 Mtr ST Pole in 1:2:4 mix as per Standards 0.66 cum / pole including the Loading/Carriage/Unloading of required material. |
| 14 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Aluminium Jointing Sleeves as per approved drawings/standards |
| 15 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2No.), anchor plate (300x 300 x 8 mm), nut-bolts, 2No.turnbuckles, 1.8m long,20 mm diameter solid GS stay rod & 7/4 mm dia GI stranded wire complete as per approved drawings/standards |
| 16 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Guard netting as per approved drawings/standards |
| 17 | Supply,Testing,Loading,Carriage,Unloading and fixing of Danger Plates with Clamps as per approved drawings/standards |
| 18 | Supply,Testing,Loading,Carriage,Unloading and fixing of Anti-Climbing Device with Clamps as per approved drawings/standards |
| 19 | Providing & Painting of Poles with one coat of Red Oxide and two coats of aluminium paint and as per approved drawings/standards |
| 20 | Supply & Laying of Cement concreting of 4-pole structure of 13 Mtr ST Pole in 1:2:4 mix as per Standards including the Loading/Carriage/Unloading of required material. |
| 21 | Dismantlling of existing ACSR Conductor with, Pin Insulators. Discs, Hardware fittings etc. including loading at site, carriage upto Divisional Stores Amargarh and unloading including all charges |
| 22 | Dismantlling of existing Channels/Angle Iron, Pin Insulators, Disc Insulators, Hardware fittings etc. including loading at site, carriage upto Divisional Stores Amargarh and unloading including all charges |
| 23 | Spares/Contengencies/T&P Items |
| 24 | Hiring of Vehicle (Scorpio/Bolero/Innova/Tavera or equivalent) to be used by the Engineer Incharge for supervision of the project including Fuel/Toll Tax/ Driver/ any other maintenace charges of the vehicle. The max. Kms to be driven per day is 80 Km. In case the vehicle is utilized less than 80 km on any given day, the payment shall be subject to deduction on account of actual fuel savings. Such deduction shall be worked out proportionately based on the approved mileage (km per litre) of the vehicle and the prevailing fuel rate. |
| 25 | Supply of heavy-duty Aluminium Extension Ladder of size 2 × 20 feet (two-section), fabricated from high-tensile aluminium ‘C’ section, with minimum 3 mm wall thickness, complete with rope and pulley arrangement for smooth extension, anti-skid steps, rubber shoes at the base, and safety locking arrangement, of approved make and quality, as per directions of the Engineer-in-Charge |
| 26 | Supply of 58 CC, 2-stroke petrol-operated chainsaw, rated power approximately 4 HP, complete with 22-inch guide bar and compatible saw chain, suitable for wood cutting and pruning including all standard accessories, tools and operational fittings required for satisfactory operation |
| 27 | Supply of ISI-marked Safety Helmet made of high-quality, impact-resistant HDPE/ABS material, equipped with adjustable headband, chin strap, ventilation system, and sweat-absorbent inner lining, conforming to IS:2925 standards, of approved make and colour, as per directions of the Engineer-in-Charge |
| 28 | Supply of ISI-marked Safety Belt / Full Body Harness made of high-strength polyester webbing with adjustable shoulder and thigh straps, equipped with double lanyard, shock absorber, and forged steel snap hooks, conforming to IS:3521 standards, of approved make and quality, as per directions of the Engineer-in-Charge |
| 29 | Supply of ISI-marked industrial Safety Shoes made of genuine leather with steel toe cap, oil/acid/slip resistant PU sole, shock-absorbing heel, and padded ankle support, conforming to IS:15298 (Part 2) standards, of approved make, size, and quality, as per directions of the Engineer-in-Charge |
| 30 | Supply of Electrical Rubber Insulating Gloves suitable for working up to 33 kV, made of high-dielectric natural rubber, seamless, ergonomically designed, conforming to IS:4770 / IEC 60903 standards, duly tested and certified, complete with manufacturer’s test certificate, of approved make and quality, as per directions of the Engineer-in-Charge. |
| 31 | Supply, testing, and delivery of high-dielectric Insulated Operating / Link Rods suitable for 11 kV to 33 kV overhead distribution systems manufactured from heavy-duty FRP/Fiberglass), featuring a uniform nominal diameter of 80 mm (±10 mm) and an overall operational length of 7 Metres. fitted with a robust, high-traction, molded skid-proof rubber insulation bottom sleeve/handle to provide anti-slip protection and additional secondary ground insulation for linemen. The top assembly must include a secure, corrosion-resistant metallic connector hook assembly, as per directions of the Engineer-in-Charge |
| 32 | Supply of waterproof Rain Coat made of high-quality PVC/Nylon fabric with heat-sealed seams, full sleeves, adjustable hood with drawstring, front zipper with flap, and matching waterproof trousers, complete with carrying pouch, of approved make, size, and quality, as per directions of the Engineer-in-Charge. |
| 33 | Supply of heavy-duty hand saw with high-quality, hardened and tempered steel blade having sharp, precision-cut teeth for efficient cutting of wood and other suitable materials with non-slip handle securely fitted to the blade for safe and comfortable operation corrosion-resistant, suitable for regular field and maintenance work, and complete in all respects as per standard industry specifications |
| 34 | Supply of heavy-duty sickle head made of high-quality hardened cast iron/metal suitable for grass cutting, weed removal and field maintenance work with suitable wooden or other compatible handle. |
| 35 | Supply of heavy-duty Iron/steel axe with a high-quality hardened and tempered steel blade, securely fitted to a sturdy, well-seasoned wooden handle with suitable for chopping wood, cutting branches and general field maintenance work |
| 36 | Supply of standard-quality A4 size white printing and photocopy paper, size 210 mm × 297 mm, 75 GSM, suitable for use in laser printers, inkjet printers and photocopiers, with smooth finish, uniform thickness, high opacity and good print quality. Each ream shall contain 500 sheets, properly packed to protect against moisture and physical damage. (to be supplied to Divisional Office) |
| 37 | Supply, Carriage upto site (including Loading/Unloading),Testing of Hydraulic Crimping Tool 150-630mm² for Copper & Aluminium Terminals Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender