Tender For Repair To Wheel Loader 430Zxh3 (Jm2055251) Jcb Make 4372
Tender Value
3.06 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
10 days left
EMD
6132
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Wheel Loader 430Zxh3 (Jm2055251) Jcb Make 4372
BOQ
| Sl. No. | Item Description |
| 1 | Repair of the Loader assembly of the machine by way of removing the entire tooth from the Loader and p/f of M.S. Sheet 20 mm thick along length of loader, plough bolt - 16 Nos., Hexagon Nut - 16 Nos. The job also includes piercing of holes in MS sheet by gas welding as per the size of plough bolt. The job also includes nominal hardening and facing of loader along the length of M.S sheet for protection of Loader assembly. The complete job includes cost of material along with carriage, labour charges, hire charges of tool and tackles. |
| 2 | Repairs to the machine by way of P/F of new glass of the Driver Doors (LH & RH) in place of the broken glass along with rubber beeding. The job includes cost of material, tools and tackles, skilled labour, carriage, transportation and all taxes applicable. Complete Job |
| 3 | Repair to wheel hub by way of dismantling the hub unit from the machine, then removing all the worn out parts from the hub, repairing by way of P/F of new spares wheel carrier - 01 No., and Crown gear - 01 Nos., Job includes cost of material, labour charges, hire charges of tools and tackles and all taxes. |
| 4 | Repairs to the machine by way of replacement of the damaged / worn out parts Fuel Water Separator Filter – 01 No, Filter Element – 01 No, Air Filter Inner – 01 No, Air Filter Secondary – 01 No, Element New – 01 No, Spin On Filter – 01 No, Transmission Filter – 01 No, Filter 5 micron – 01 No, Tank Filter – 01 No, Fuel Strainer – 01 No. The job includes cost of material, skilled labour charges, carriage, transportation and all taxes as applicable. (Complete Job) |
| 5 | Repair of Front Boom cylinder assembly (Complete Unit) of the machine by way of dismantling from the machine then removing worn out / damaged parts from the cylinder, cleaning / polishing inner bore of the cylinder, repairing by way of P/F of new cylinder seal kit - 01 kit, bimetal bush - 01 No, spring - 01 No, collar - 01 No and piston - 1 No, Assembly Segment (Complete) – 01 Unit. Job includes denting and straightening of the foot rest of the machine along with side protection shield and painting with assorted colour by applying metal putty for an even surface before painting. Job includes labour charges, cost of material also hire charges of tools and tackles, complete job. |
| 6 | Repairs to Self Starter, Dynamo and wiring of the machine by way of dismantling of self-starter, dynamo and worn out wiring of machine. P/F of Self Armature, Self Carbon bushes, Clutch disks, Contact point and defective rods. P/F of Dynamo Armature, Bearing, Carbon bushes. Replacement of worn out wiring, battery leads etc. P/F of Voltage regulator, Ammeter starting switch with key, L.T. wire as per requirement of job. Complete Job includes assembling of unit, testing and cost of labour and allied material. |
| 7 | Repairs to the machine by way of P/F of new Wiper Blade Assembly to the machine in place of broken wiper bade assembly. The job also includes Providing tools for the machine i.e. Wheel Spanner – 01 No., Wheel Rod Long -01 No, Socket 24 No. HD – 02 No, Wheel Socket 41 No HD – 02 No. The Job includes cost of material, tools and tackles, skilled labour, carriage, transportation and all taxes applicable. Complete Job |
| 8 | Repairs to the machine by way of replacement of Head Light Assembly – 02 No by way of replacement of the broken head light assemblies during snow clearance. The job includes laying of new wiring circuit for the head lights. The job also includes straightening of the head light clamps by means of denting and re-fixing by means of metal welding to the machine. The job includes cost of material, tools and tackles, skilled labour, carriage and all taxes as applicable. Complete Job |
| 9 | Brake Oil Grade – A6 |
| 10 | Coolant Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender