Tender For Repair/Replacement Of Certain Wooden/Steel And Aluminium Joineries, Cupboards, Hardware Fittings, Bird Proof Netting In Hangars And Tms Etc In Certain Buildings Of Tech And Adm Area At Afa Hyderabad.
Tender Value
33 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
19 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Certain Wooden/Steel And Aluminium Joineries, Cupboards, Hardware Fittings, Bird Proof Netting In Hangars And Tms Etc In Certain Buildings Of Tech And Adm Area At Afa Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters exc 1.5 sqm but n exc 4 sqm each of any description (without taking off shutters from the frame) including necessary repair and making good the surface including complete jamb repair in full width of the wall as requred including PCC in 1:2:4 and finishing the surface with cement plaster 10mm thick in cement mortar 1:4 complete all as specified and as directed |
| 2 | Taking down chowkats or frames with shutters n, exc 1.5 sqm each of any description (without taking off shutters from the frame) including necessary repair and making good the surface, including complete jamb repair in full width of the wall as requred including PCC in 1:2:4 and finishing the surface with cement plaster 10mm thick in cement mortar 1:4 complete all as specified and as directed |
| 3 | S&F 1st class hard wood plain, solid, straight, chowkats and frame, wrought, frammed or rebated on the solid rounded or chamferred, put together with glue pinned at joints. |
| 4 | S & F for 35mm thik 1st class softwood plain, framed, panelled shutters (any number of panels), skeleton shutter for glazed door (feather edged), supplied and fitted to chowkats complete all as specified and directed. |
| 5 | S&F 35mm thick second class hard wood Plain framed, panelled shutter with lock rail . The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated |
| 6 | S&F of factory made 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 7 | S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats |
| 8 | S & F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube complete all as specifid and as directed. |
| 9 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 10 | S & F solid PVC door frame of size 50 mm X 95 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube complete all as specifid and as directed. |
| 11 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawin and as per directions of Engineer-in-charge |
| 12 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge |
| 13 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 14 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant |
| 15 | S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 16 | S & F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 17 | S&F powder coated aluminium frame( Minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc complete all as specified |
| 18 | S&F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified (Powder coating should not be less than 50 micron) |
| 19 | S & F powder coated aluminium windows and ventilator shutters, sliding type, without sash bars aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips , rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as rollers, locking arrangement, handles etc complete all as specified. (Powder coating should not be less than 50 micron) |
| 20 | S & F 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination in aluminium doors/partition complete all as specified and directed |
| 21 | S & F 4.80 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading of any size in each pane complete all as specified and as directed. |
| 22 | S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares of any size and in aluminium frames in each pane complete all as specified and as directed. |
| 23 | S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 24 | S&F of Aluminium anodised,barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed. |
| 25 | S&F of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed. |
| 26 | S&F of Aluminium handles, cast type, anodised of size 200 mm long etc complete all as specified and as directed. |
| 27 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed. |
| 28 | S&F of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etc complete. |
| 29 | S&F 140mm Floor door stopper of brass body and tongue, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 30 | S&F of Mortice lock, of brass 4 levers vertical type of size 100 mm etc complete. |
| 31 | S&F Door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixedcomplete all as specified and as directed by Engr-in-charge (make:- Godrej (C-680), Hafele (DCL 55) & Hettich (HSA-10-EN) |
| 32 | Dismantling wall and ceiling boards( fibre, pulp,insulation,etc) or insulation boards/slabs/blankets, any thickness,including cover fillets , aluminium frame work etc of any description complete all as specified and as directed by Engr-in-charge |
| 33 | S&F Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. with fully perforated 12mm thick micro tegular edged or 10mm thick squre edged GRG False ceiling . The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 34 | S&F Solid PVC Wall Lining /panelling consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 35 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engr-in-charge |
| 36 | Supply and fix only Armstrong Ceiling Classic Lite 600x600x16mm, NRC-0.55, grid size m/t 32x24mm boards including taking down old ceiling boards all as specified and directed |
| 37 | M&L in repair Woodlot FR Grades of size 2430x131x16mm made of exterior grade HDF backed with acoustical having excellent noise absorption 0.88 NRC as per ISO 354. 15mm Aluminum profile conforms to Aluminum Alloy 6063-T 6.Temper as per BS: 1474 1987 and G.I Lock in clips on the back of tongue and Groove system. Density per panel is 750-800 kg/m3. The panels come with tongue & groove for seamless patterns, 4-28mm Groove and visible panel. The perpendicular holes are available on the back of panel which are covered by black acoustical fleece. Installed on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results. |
| 38 | S & F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with nails complete all as specified and directed |
| 39 | S&F for Brass handles, cast type, polished bright 150 mm long in repairs all as specified and directed |
| 40 | S&F in repair Continuous (piano) hinges, brass width of flap 30mm bright finish or electro galvanised |
| 41 | M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 42 | Hacking out old unserviceable glass / broken glass panes of any description, from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones in repairs complete all as specified and as directed. |
| 43 | S&F 4mm thick frosted glass sheet and glazing with oil putty in any size in each pane all as specified and directed by Engr-in-Charge . |
| 44 | M & L for taking down existing aluminium sliding Windows,3 track / 2 track resecuring or easing & adjusting and refixing in same opening after and rubber beadiing, necessary repairs for smooth functioning of any description exc 1 sqm but not 2.5 Sqm each all as specified and directed by Engr-in-Charge |
| 45 | M & L for taking down existing aluminium doors, resecuring or easing &rubber beadiing ,adjusting and refixing in same opening after necessary repairs for smooth functioning of any description exc 1 sqm but not 2.5 Sqm each all as specified and directed by Engr-in-Charge |
| 46 | S&F in repair of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etc complete. |
| 47 | S & F in repair 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 48 | S & F in repair 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 49 | S & F in repair 50 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 50 | S&F in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed. |
| 51 | S&F in repair Aluminium handles, cast type, anodised of size 125 mm long etc complete all as specified and as directed. |
| 52 | S&F in repair of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed. |
| 53 | S&F in repair of Aluminium anodised, barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed.. |
| 54 | S&F in repair of Aluminium anodised, barrel tower bolts of extruded section of size 150 mm long etc complete all as specified and as directed. |
| 55 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished etc complete all as specified and as directed. |
| 56 | S & F in repair of 125 mm Hasp and staple, safety type, aluminium hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified. |
| 57 | S&F in repair Fancy type 20mm dia curtain rod , chromium plated with fixing brackets, stops, rollers etc |
| 58 | S&F in repair Fancy type 25mm dia curtain rod , chromium plated with fixing brackets, stops, rollers etc |
| 59 | S&F in Repairs 140mm Floor door stopper of brass body and tongue, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 60 | S&F in repair of Mortice lock, of brass 4 levers vertical type of size 100 mm etc complete. |
| 61 | S & F in repairs door closer, hydraulically regulated, aluminium body designation No 2 universal type suitable for shutters of weight between 36 to 60 Kg fixed in repairs complete all as specified and as directed. ( make:- Godrej (C-680), Hafele (DCL 55) & Hettich (HSA-10-EN) |
| 62 | S&F in repair for toughened glass door bottom lock fittings made of stainless steel complete all as specified and directed |
| 63 | S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ( make:- Godrej, Hafele & Hettich. |
| 64 | S & F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 65 | S&F Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or manual typ all as specified and as directed. |
| 66 | S&F Safety lever locks mild steel with 4 levers for rolling shutters all as specified and as directed. |
| 67 | S&F Ball bearing for rolling shutters all as specified and as directed. |
| 68 | M & L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete. |
| 69 | Supplying & Fixing of HDPE braided bird proofing net of 2.5mm thick, 30mm mesh size, including fixing / tying with HDPE or Nylon wire / PVC clamps etc in various Air craft Hangars and Tarmac Maintenance Shelters in Tech area at height upto 12.0m approx as per manufacturer's instructions including taking down old bird proofing net of any description all as specified and directed.Note:- (i) The work shall be executed at a height upto 12 m approx from floor level. The contractor shall make his own arrangement for mechanical equipment like boom lift / crane and / or steel tubular scaffolding etc for fixing and tying the bird proofing net. (ii) Contractor should take care of all necessary precautionary safety measures while doing the work. (iii) The buildings will be handedover to contractor in phased manner.(iv) Old bird proofing net of any description and in any condition obtained from dismantling will be the Contractor property and has to be removed to outside MD land and disposed off at his own arrengement without any additional cost to Govt(v) Care shall be taken and net shall be properly fixed near light fittings and edges / corners of bldg to avoid entry of birds. (vi) The rate quoted by the tenderer is deemed to be included of the above provisions and no claim whatsoever on this account is admissible. |
| 70 | Labour only for securely tying/ tightening the loose exsting Bird proofing net with and including required HDPE or Nylon wire / PVC clamps for securing as required in various Air Craft Hangars / Tarmac Maintenance Shelters at a height upto approx 12m from the FFL in technical area complete all as directed by Engr-in-Charge.Note:- (i) The work shall be executed at a height upto 12 m from floor level. The contractor shall make his own arrangement for mechanical equipment like boom lift / crane and / or steel tubular scaffolding etc for fixing and tying the bird proofing net. (ii) Contractor should take care of all necessary precautionary safety measures while doing the work. iii) Care shall be taken and net shall be properly fixed near light fittings and edges / corners of bldg to avoid entry of birds(iv) The buildings will be handedover to contractor in phased manner.(v) The rate quoted by the tenderer is deemed to be included of the above provisions and no claim whatsoever on this account is admissible. |
| 71 | Welding or repair of steel cupboard ,lockers cabinates by welding to broken hinges or handle ,lock,etc etc complete each cupboard ,lockers cabinates work. At different location as direct by eng-in charge.(any items such as hinge or handle ,locks,etc if provided new ,shall be paid as supply only umder following items) |
| 72 | S&F in Repair Framed work such as grills,gratings,iron Chowkhats etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors ;ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar workconforming to Fe.290.Gde-E-165 all as specified and direcetd. |
| 73 | M&L for Preparation of new or previously untreated surfaces of steel and Iron surfaces of any description over 10cm in width or girth,not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide , zinc chrome paint all as specified and direcetd. |
| 74 | M&L for Preparation of new wooden surfaces melamine polish including two coat of melamine polish including one coat of lakqor and filler with base colour pigment for finished surfaces of any description over 10cm in width all as specified and as directed. |
| 75 | S&F in repair Vertical venition blinds curtains feature an extruded aluminum headrail typically measuring 25mm high by 47mm wide with a 0.9mm to 1.4mm wall thickness, paired with 89mm or 127mm vertical slats made from rigid PVC or 100% polyester fabric weighing between 390 and 425 GSM. The system is stabilized by bottom enclosed weight plates linked by a plastic or stainless steel bead chain and is operated by an end reduction gear box featuring a 3.5:1 ratio that allows smooth 180° slat rotation and traversing control via manual chain-and-cord, wand, or motorized systems mounted on ceiling or wall brackets with self-aligning runners. as specified and directed by Engr-in-Charge . Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender