Tender For Completion Of Incomplete Work Of special Repair To Single Offrs Accn (08 Rooms) And Or Accn (04 Rooms) Alongwith Washroom Block In Cod Offrs Mess Under Ge (West) Agra
Tender Value
59.67 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
24 days left
EMD
1.14 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Completion Of Incomplete Work Of special Repair To Single Offrs Accn (08 Rooms) And Or Accn (04 Rooms) Alongwith Washroom Block In Cod Offrs Mess Under Ge (West) Agra
BOQ
| Sl. No. | Item Description |
| 1 | M&L for removing existing waterproofing treatment of any description from roof slabs, including cleaning the surface with wire brushes, roughening the concrete surface by picking, sweeping and washing down with water to remove dust, dirt and loose material, and applying neat cement slurry at the rate of 3.00 kg of cement per sq m where PCC padding is to be provided, complete all as specified and directed. |
| 2 | M&L for preparation of old roof surfaces by brooming and watering, including removal of dust, dirt and loose particles, and providing and laying PCC 1:2:4, Type B-0, using 12.5 mm graded crushed stone aggregate, mixed with approved waterproofing compound as per the manufacturer's instructions, as a padding/levelling course of average thickness 25 mm, including levelling, finishing and curing, complete all as specified and directed.Note: Waterproofing compound shall be measured and paid for separately under the relevant item. |
| 3 | M&L for water proofing treatment for roof by applying priming coat of epoxy primer with resin and harder in 1:3 ratio with water dilution as per manufacturer instructions, applying two coats of fiber Reinforced Elastomeric Liquid fiber applied water proofing membrane formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fibers liquid applied membrane with consumption of 0.93sqm/ltr (each coat). Second coat should be applied once 1st coat becomes dry completely all as specified and directed. Ponding test of the roof surface will be done for 72 hours before and after the roof treatment process to identify the leakage and seepage from the roof surface complete all as specified and directed. Note :- (a) The work under item 03 shall be carried out by the authorised applicator of Manufacturer by using modern techniques. The contractor shall also furnish warrantly of quality, finish work and effectiveness of waterproofing treatment under this item for a period of not less than 10 years from the date of completion along with manufacturer warrantly of material for the same period. (b) Cost of ponding test deemed to inclusive of rates quoted by contractor.(c) From the taking down, preparation of the surface, Eng-in-Charge shall approve each and every stage before applying finishing coats. |
| 4 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area n.exc 1.50 sqm each including making good disturbed portions of wall with new or old bricks, lintel, cills etc including brick work of jambs and cill in CM 1:4 complete all as specified and directed. |
| 5 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame), area exc 1.50 sqm but n.exc 4.0 sqm each, including making good disturbed portions of wall with new or old bricks, lintel, cills etc including brick work of jambs and cill in CM 1:4 complete all as specified and directed. |
| 6 | S&F powder-coated aluminium frames for doors, windows and ventilators, with one or more rebates, including necessary joining cleats, fixing accessories and all necessary fittings, with powder coating of minimum 50 micron thickness, complete all as specified and directed |
| 7 | S&F powder-coated aluminium door shutters, fabricated from aluminium sections weighing 0.55 kg/m or more, including necessary joining cleats, glazing clips, rubber/neoprene packing, 2 Nos. handles per door, hinges, powder coated aluminium snap beading, screws and all necessary fittings and accessories, complete with powder coating of approved colour, having a minimum dry film thickness of 50 microns, complete all as specified and directed.Note: Sheet glass and veneered board shall be measured and paid for separately under the relevant items |
| 8 | S&F powder-coated aluminium window and ventilator shutters, side-hung type, without sash bars, fabricated from aluminium sections weighing 0.55 kg/m or more, including necessary joining cleats, glazing clips, rubber/neoprene packing, aluminium snap beading, screws and aluminium fittings such as 150 mm long peg stays (1 No.), 100 mm long Type B-21 hinges (2 Nos.), suitable handles (1 No.) and tower bolts (2 Nos.), complete with powder coating of any approved colour having a minimum dry film thickness of 50 microns, complete all as specified and directed.Note: Sheet glass shall be measured and paid for separately under the relevant items |
| 9 | S&F 4.00 mm thick ordinary quality sheet glass in panes not exceeding 0.50 Sqm each, glazing with oil putty or fixed with glazed pins and beads, complete all as specified and directed. |
| 10 | S&F 5.00 mm thick ordinary quality sheet glass in panes not exceeding 0.50 Sqm each, glazing with oil putty or fixed with glazed pins and beads, complete all as specified and directed. |
| 11 | S&F 3.00 mm thick figured glass, pinhead type, including glazing with oil putty in panes not exceeding 0.5 sq m in area each, complete all as specified and directed. |
| 12 | S&F stainless steel wire cloth, 0.71 mm nominal wire diameter, with average aperture width of 1.40 mm, including fixing with stainless steel wire staples, complete all as specified and directed. |
| 13 | S&F in repair aluminium die-cast body hydraulic door closer, hydraulically regulated, Designation No. 3, universal type, suitable for door shutters of 851–1000 mm width and weighing 61–80 kg, including fixing with all necessary screws, complete all as specified and directed. |
| 14 | S&F in repair vertical brass mortice lock, 100 mm size, 4-lever type, brass, chromium-plated, complete with two keys, complete all as specified and directed. |
| 15 | S&F fabricated extruded aluminium alloy handles, anodised finish, 150 mm long, complete all as specified and directed. |
| 16 | S&F anodised aluminium barrel tower bolts of extruded section, 200 mm long, complete all as specified and directed. |
| 17 | S&F butt hinges, 125 mm size, extruded aluminium alloy, Type B-21, with galvanised mild-steel hinge pin, anodised finish, complete all as specified and directed. |
| 18 | S&F stainless steel butt hinges, medium weight, of 75 mm long fixed with stainless steel screws, complete all as specified and directed |
| 19 | S&F mild steel sliding door bolt, 300 mm plate type, with bright bolt not less than 12 mm dia with and incl a min of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 20 | S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framed work of water tanks and similar works, conforming to Fe 290, Grade E-165, complete all as specified and as directed |
| 21 | S&F 12 mm thick veneered particle board, exterior grade, solid-core, general-purpose type, with face veneers of Type ‘BB’, including cutting to required size and fixing in aluminium door shutters with suitable rubber gasket, complete all as specified and directed |
| 22 | S&F factory made solid PVC door frame, minimum size 50 mm × 47 mm, fabricated from 5 mm thick plain-colour PVC sheet, reinforced with MS square tube, including supplying and fixing in the opening as per specifications and drawings, complete all as specified and directed. |
| 23 | S&F factory-made solid-panel PVC door shutter, 30 mm thick, comprising a frame fabricated from MS tubes for top and bottom rails, the MS frame being covered with heat-moulded plain-colour PVC ‘C’ channels incorporating 20 mm wide PVC sheet strips fixed internally with solvent cement for the stiles, and plain-colour PVC sheets for the top rail, lock rail and bottom rail on both sides, including gap inserts for the top and bottom rails; complete with plain-colour PVC sheet panelling fitted into the MS frame and securely welded/sealed to the stiles and rails with suitable PVC sheet beading and solvent cement, including supplying and fixing in the door frame at site, complete as per specifications and drawings and all as specified and directed |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including taking down of backing plaster to brick / concrete wall surface), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 25 | M&L for glazed ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (i.e. 450 x 300 mm or 600 x 300 mm or as directed by Engineer-in-charge) on vertical surfaces such as dado, skirting, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 26 | M&L for non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 27 | M&L for non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 28 | M&L for non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as skirting, dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 10 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 29 | M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, coloured (shade & pattern as approved by Engineer-in- charge) area of each tiles not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match , laid over and including 15mm thick cement screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 30 | M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, coloured (shade & pattern as approved by Engineer-in- charge) area of each tiles not exceeding 0.38 sqm, on vertical surfaces such as skirting, dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match , laid over and including 10 mm thick cement screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed. |
| 31 | Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 32 | Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender