Tender For Addn And Altn To Parapet Wall Along The Road Towards Ashoka Building And Main Road Of Nsry (Svp) And Provn Of Toilets/ Urinals At Nsry Under Ge Haddo, Sri Vijaya Puram
Tender Value
46.70 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
2 days left
EMD
93400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn And Altn To Parapet Wall Along The Road Towards Ashoka Building And Main Road Of Nsry (Svp) And Provn Of Toilets/ Urinals At Nsry Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in hard/dense soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc n. exc 10 Sqm on plan and getting out complete all as specified and directed |
| 2 | Excavation over areas, n exc 1.5 m deep and getting out in hard dense soil complete all as specified and as directed. |
| 3 | Excavation in post holes(or similar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil complete all as specified and as directed. |
| 4 | M&L for returning filling in hard/dense soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed |
| 5 | Removing excavated soil to a distance not exc 50M and depositing where directed at level not exc 1.5 m above starting point complete all as specified and directed. |
| 6 | M&L for PCC type D2 (1:4:8) (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and as directed. |
| 7 | M&L for cement concrete Type C-1, 1:3:6 (using 20 mm graded stone aggregate) in post foundation, foundation and mass concrete all as specified and directed |
| 8 | M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) complete all as specified and as directed. |
| 9 | M&L precast cement concrete block masonry 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in cement mortar 1:4 all as specified |
| 10 | M&L for rendering 15 mm thick cement plaster in CM 1:4 with WPC on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings, finished even smooth without using extra cement etc complete all as specified and as directed. |
| 11 | Supply only Liquid water proofing compound |
| 12 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified and directed. |
| 13 | M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed. |
| 14 | M&L for preparation on newly plastered external wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over treated surfaces complete all as specified and directed. |
| 15 | M & L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) 75mm thick as in levelling course, sub-floors and paving etc complete all as specified and directed. |
| 16 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and directed. |
| 17 | M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 18 | S & F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed. |
| 19 | S & F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed. |
| 20 | S & F for mild steel plates (plain or chequired) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed. |
| 21 | M&L for aluminium wind tie of any size fixed with self tapping screw with integral EPDM washer in roof covering complete all as specified and directed |
| 22 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 23 | S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550 Mpa as in roof overing /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 24 | M & L for Anodised aluminium snap grid frame work for false ceiling 605mm x 605mmusing aluminium anodized sections specified in SSR part-I 1991 including cutting, drilling jointing etc complete including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long including Providing 6mm thick E-boards classic 605mm x 605mm size at any height upto 12m with necessary scaffoldings etc complete all as specified and as directed |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 27 | S&F 100 mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized , type B-21 complete all as specified and directed |
| 28 | S&F extruded aluminum alloy handle fabricated type powdercoated 100mm long complete all as specified and directed |
| 29 | S&F Aluminum powder coated barrel tower bolt of extruded section 100mm long complete all as specified and directed |
| 30 | S&F Aluminum alloy powder coated sliding door bolt 200mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed |
| 31 | S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 32 | Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified and directed |
| 33 | S&F Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples complete all as specified and directed |
| 34 | S&F in repairs aluminum (extruded section) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 35 | S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls or floors etc using synthetic rubber adhesive cement solvent complete all as specified and directed |
| 36 | S&F PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive etc complete all as specified and as directed. |
| 37 | S&F PVC (SWR) vent cowl 110mm dia jointed with approved adhesive etc complete all as specified and as directed. |
| 38 | S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls or in floors etc using synthetic rubber adhesive cement solvent complete all as specified and directed. |
| 39 | S&F for 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and as directed |
| 40 | S&F 75mm outlet dia PVC (SWR) multi floor trap with grating including jointing with solvent cement to waste pipe etc complete all as specified and as directed. |
| 41 | S&F in vitreous china wash hand basin,white, flat back of size 450x 300 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, waste pipe and all necessary inlet, out let connections complete all as specified and directed. |
| 42 | S&F in 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts etc all as specified and directed. |
| 43 | S&F Health faucet (ABS Body) Fancy type mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 44 | S&F in 15mm dia CP Angle cock with flange fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed. |
| 45 | S&F in repairs 15mm dia Two way bib taps long body with flange cast copper alloy chromium plated fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed. |
| 46 | S & F in for vitreous China bowl urinal flat back, of size 465x355x265 mm white (minimum) with grating and union for discharge pipe including providing and fixing plugs, buttiing urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement with and including 32mm dia waste pipe in low density polyethylene (LDPE) of pressure rating 6 kgf/sqcm of 1.0 metre length, PVC connections 15mm size with PTMT nuts of length 450mm, concussive push button taps 15mm dia or bore, cast copper alloy, screwed for iron pipe, urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms), complete all as specified and as directed. |
| 47 | S&F Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. |
| 48 | S&F in PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets etc complete all as specified and directed. |
| 49 | S&F in Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange etc complete all as specified and directed. |
| 50 | S&F in Bevelled edge looking mirror 600 x 450 mm of selected quality glass, mounted on 6mm thk AC bldg board or commrcial ply wood & fixed to wooden plugs with CP catch nuts complete all as specified and as directed. |
| 51 | Supplying and laying of 20 mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 52 | Supplying and laying of 25 mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 53 | S&F in repairs for providing 20mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends suitable for CPVC pipes etc complete all as specified and as directed. |
| 54 | Cutting chases in PCC block or Brick or stone walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge. |
| 55 | S&F Rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge. |
| 56 | S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge. |
| 57 | M&L PCC 1:3:6 type C2 using 40mm aggregate for Concrete bed to 160 mm dia drain pipes of including packing under, and haunching against the sides of pipes after they are laid and tested; in complete |
| 58 | S&F UD PVC drainage pipes (SJ Type) S165/SN8/SDR34 160mm dia in any length with rubber ring joints laid in trenches all as specified and directed. |
| 59 | M&L for PCC 1:2:4 type B2 as in surface channel and drain & benching of manhole and finishing even and smooth without using extra cement complete all as specified and directed. |
| 60 | M&L for providing precast cement concrete cover slabs for drain in RCC 1:2:4 type B1 (using 20mm graded aggregate) set in cement mortar 1:4 complete all as specified and directed. |
| 61 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 62 | M&L for deformed TMT steel bars 5mm dia and over as in stirrups and cut to length, bent to shape required, including cranking, bending with MS wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 63 | M&L for RCC (Nominal Mix) Type B1 1:2:4 (20 mm graded aggregate) in lintels, beams etc complete all as specified & directed. |
| 64 | M&L Chequered cement concrete tiles (glossy finish) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors, over and Including 20mm thick screed bed in CM 1:6 etc all as specified and as directed. |
| 65 | Dismantling of precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified. |
| 66 | M&L for rendering 10mm thick cement plaster in CM( 1:6) on fair face of PCC block/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 67 | Demolition of floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed. |
| 68 | M&L 7 to 8 mm thick Brick lay pattern or similar design with mat finished top in vertical walls, steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of tile omplete all as specified and directed.Note : Colour and pattern of tile shall be as approved by Engr-In-Charge |
| 69 | M&L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified.Note : Colour of granite shall be as approved by Engr-In-Charge |
| 70 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 71 | S&F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-304 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location complete all as specified and as directed. |
| 72 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. (Note- The rate is inclusive of excavation required as per direction of Engr-In-Charge) |
| 73 | M & L for preparation of new concrete/PCC block surfaces of any description exc 10 cm in width or girth and applying two coat of synthetic enamel paint with yellow / black pattern over a coat of primer complete all as specified. |
| 74 | Excavation in trenches not exc 1.5 M deep and 1.5 M width and getting out in soft or loose soil for foundation of poles (or) cable laying complete all as specified and as directed. |
| 75 | M & L for cutting the road/ footpath/ hard standing etc for laying of pipe all as directed by Engr In Charge. |
| 76 | M&L for Precast cement concrete (PCC) type B1 1:2:4 using 20mm graded aggregate stone for making copings including use and waste of form work complete etc complete all as specified and directed |
| 77 | S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required, etc completed all as specified and as directed. |
| 78 | M & L of PP-R Ball valves (brass insert) 25 mm dia as per requirement of the site all as specifed and directed by Engr in Charge. |
| 79 | Supply, laying, testing and commissioning of underground LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 2 core x 10 sqmm (laid in terenches,ducts,pole,wall etc.) all as specified and directed. |
| 80 | Supply and laying in trenches or in cable ducts or clamping on wall DWC HDPE pipe of size 40 mm (OD) x 32 mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection all as specified and directed. |
| 81 | M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Make of wire : V-Marc/ Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 82 | Description same as per Srl item No.81 above but One light/fan point controlled by one switch 5 Amps one way. |
| 83 | Description same as per item Sl No.81 above but for one modular 3 pin 5 Amp socket out let on independent board complete all as specified and directed. |
| 84 | Description same as per Srl item No.81 above but, point wiring for 3 pin switch socket outlet , 5 Amps on same board . |
| 85 | S & F for switch modular type, 1 Amps 1 module, 230 volts AC circuit complete all as specified and directed. |
| 86 | S & F for socket outlet modular type 1 way 6 Amps, 3 pin, flush type 230 volts AC circuit complete all as specified and directed. |
| 87 | S & F for ceiling rose, 3 phase, PVC polycarbonate, isolated body complete all as specified and directed. |
| 88 | S & F and testing Tube light fittings aluminium tubes 22 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LTA522 or equivalent to CG/Philips Havells |
| 89 | Supply and fixing and testing Mirrior light fitting of capacity 20 watt with all fixing arrangements all as specified and directed. Make-Havells Cat No LHFAAYPBNU1W020 or equivalent to Philips/ CG |
| 90 | S & F GI bracket of GI pipe light grade of size 32 mm dia including nuts, bolts and washers for building secufity light including taking down all as specified and directed. |
| 91 | Supply & fix 30 Watts LED Building security light fittings, pressure die cast aluminium housing powder coated graphite gray and toughened glass of IP-65 with pranuts including necessary fixing arrangement as per site requirements class including taking down all as specified and directed by Engr-in-Charge. Make :- Luker Cat Pat No. LSTE030S or equivalent to Philips / Havells / CG |
| 92 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. |
| 93 | S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 4 ways and making good to the distrubed surface /walls complete all as specified and directed. |
| 94 | Supplying & fixing in replacement of MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed . |
| 95 | Supplying & fixing in replacement of MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.Note for item No 91.00 & 92.00 : All copper conductors should be connected with MCCB/ MCB alongwith copper reducer terminals of suitable size duly crimpled.” |
| 96 | Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement all as specified and as directed by Engineer-in- Charge. |
| 97 | Earthing in replacement of complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender